[U-Boot] [PATCH 7/8] x86: Probe pinctrl driver in cpu_init_r()

[Bin Meng]

At present pinctrl driver gets probed in ich6_gpio driver's probe
routine, which has two issues:

 - Pin's PADs only gets configured when GPIO driver is probed, which
   is not done by default. This leaves the board in a partially
   functional state as we must initialize PADs correctly to get
   perepherals fully working.
 - The probe routine of pinctrl driver is called multiple times, as
   normally there are multiple GPIO controllers. It should really
   be called just once.

Move the call to syscon_get_by_driver_data() from ich6_gpio driver
to cpu_init_r().

Signed-off-by: Bin Meng <bmeng.cn at gmail.com>

---

 arch/x86/cpu/cpu.c             | 5 +++++
 drivers/gpio/intel_ich6_gpio.c | 7 -------
 2 files changed, 5 insertions(+), 7 deletions(-)

diff --git a/arch/x86/cpu/cpu.c b/arch/x86/cpu/cpu.c
index e522ff3..269043d 100644
--- a/arch/x86/cpu/cpu.c
+++ b/arch/x86/cpu/cpu.c
@@ -24,6 +24,7 @@
 #include <dm.h>
 #include <errno.h>
 #include <malloc.h>
+#include <syscon.h>
 #include <asm/control_regs.h>
 #include <asm/coreboot_tables.h>
 #include <asm/cpu.h>
@@ -751,6 +752,10 @@ int cpu_init_r(void)
 	uclass_first_device(UCLASS_PCH, &dev);
 	uclass_first_device(UCLASS_LPC, &dev);
 
+	/* Set up pin control if available */
+	ret = syscon_get_by_driver_data(X86_SYSCON_PINCONF, &dev);
+	debug("%s, pinctrl=%p, ret=%d\n", __func__, dev, ret);
+
 	return 0;
 }
 
diff --git a/drivers/gpio/intel_ich6_gpio.c b/drivers/gpio/intel_ich6_gpio.c
index 2d66d04..fd6181f 100644
--- a/drivers/gpio/intel_ich6_gpio.c
+++ b/drivers/gpio/intel_ich6_gpio.c
@@ -32,7 +32,6 @@
 #include <fdtdec.h>
 #include <pch.h>
 #include <pci.h>
-#include <syscon.h>
 #include <asm/cpu.h>
 #include <asm/gpio.h>
 #include <asm/io.h>
@@ -113,12 +112,6 @@ static int ich6_gpio_probe(struct udevice *dev)
 	struct ich6_bank_platdata *plat = dev_get_platdata(dev);
 	struct gpio_dev_priv *uc_priv = dev_get_uclass_priv(dev);
 	struct ich6_bank_priv *bank = dev_get_priv(dev);
-	struct udevice *pinctrl;
-	int ret;
-
-	/* Set up pin control if available */
-	ret = syscon_get_by_driver_data(X86_SYSCON_PINCONF, &pinctrl);
-	debug("%s, pinctrl=%p, ret=%d\n", __func__, pinctrl, ret);
 
 	uc_priv->gpio_count = GPIO_PER_BANK;
 	uc_priv->bank_name = plat->bank_name;
-- 
2.7.4