[U-Boot] [PATCH v2 4/6] sun5i: Add NAND controller to the sun5i DTSI

[Boris Brezillon]

From: Maxime Ripard <maxime.ripard at free-electrons.com>

Add the NAND controller definition to sun5i.dtsi.

Signed-off-by: Maxime Ripard <maxime.ripard at free-electrons.com>
Signed-off-by: Boris Brezillon <boris.brezillon at free-electrons.com>
---
 arch/arm/dts/sun5i.dtsi | 49 +++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 49 insertions(+)

diff --git a/arch/arm/dts/sun5i.dtsi b/arch/arm/dts/sun5i.dtsi
index 59a9426..87e5353 100644
--- a/arch/arm/dts/sun5i.dtsi
+++ b/arch/arm/dts/sun5i.dtsi
@@ -356,6 +356,17 @@
 			#dma-cells = <2>;
 		};
 
+		nfc: nand at 01c03000 {
+			compatible = "allwinner,sun4i-a10-nand";
+			reg = <0x01c03000 0x1000>;
+			interrupts = <37>;
+			clocks = <&ahb_gates 13>, <&nand_clk>;
+			clock-names = "ahb", "mod";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
 		spi0: spi at 01c05000 {
 			compatible = "allwinner,sun4i-a10-spi";
 			reg = <0x01c05000 0x1000>;
@@ -548,6 +559,44 @@
 				allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
 			};
 
+			nand_pins_a: nand_base0 at 0 {
+				allwinner,pins = "PC0", "PC1", "PC2",
+						"PC5", "PC8", "PC9", "PC10",
+						"PC11", "PC12", "PC13", "PC14",
+						"PC15";
+				allwinner,function = "nand0";
+				allwinner,drive = <0>;
+				allwinner,pull = <0>;
+			};
+
+			nand_cs0_pins_a: nand_cs at 0 {
+				allwinner,pins = "PC4";
+				allwinner,function = "nand0";
+				allwinner,drive = <0>;
+				allwinner,pull = <0>;
+			};
+
+			nand_cs1_pins_a: nand_cs at 1 {
+				allwinner,pins = "PC3";
+				allwinner,function = "nand0";
+				allwinner,drive = <0>;
+				allwinner,pull = <0>;
+			};
+
+			nand_rb0_pins_a: nand_rb at 0 {
+				allwinner,pins = "PC6";
+				allwinner,function = "nand0";
+				allwinner,drive = <0>;
+				allwinner,pull = <0>;
+			};
+
+			nand_rb1_pins_a: nand_rb at 1 {
+				allwinner,pins = "PC7";
+				allwinner,function = "nand0";
+				allwinner,drive = <0>;
+				allwinner,pull = <0>;
+			};
+
 			uart3_pins_a: uart3 at 0 {
 				allwinner,pins = "PG9", "PG10";
 				allwinner,function = "uart3";
-- 
2.7.4