[U-Boot] [PATCH v4 1/2] powerpc/mpc85xx: SECURE BOOT- Enable chain of trust in SPL
Andreas Dannenberg
dannenberg at ti.com
Thu Jun 9 17:05:24 CEST 2016
Hi Sumit,
On Thu, Jun 02, 2016 at 08:16:37AM -0400, Sumit Garg wrote:
> As part of Chain of Trust for Secure boot, the SPL U-Boot will validate
> the next level U-boot image. Add a new function spl_validate_uboot to
> perform the validation.
I noticed your patch series just now and I certainly don't want to
derail what you are trying to do here but I wanted to see what you think
about something that's pretty much related.
In order to be more flexible in how we go from SPL to U-Boot (we have a
need to inject ROM-API calls for decryption in addition to
authentication) I've been experimenting with a method that basically
injects a generic post-process function call into spl_load_simple_fit()
that the platform-specific layer can provide/override. This function
will basically get invoked on the U-Boot firmware itself as well as for
the selected DTB after it gets loaded, allowing to do things like custom
authentication and/or decryption through plugging in for example our ROM
API calls. But this should also be a starting point for someone to plug
in the U-Boot RSA libraries directly in a way that doesn't require using
CONFIG_SPL_DM (for memory-constrained devices).
So mostly I wanted to see if this is something that could be useful for
you as well, and any comments/concerns you may have on that.
Thanks and Regards,
--
Andreas Dannenberg
Texas Instruments Inc
> Enable hardware crypto operations in SPL using SEC block.
> In case of Secure Boot, PAMU is not bypassed. For allowing SEC block
> access to CPC configured as SRAM, configure PAMU.
>
> Reviewed-by: Ruchika Gupta <ruchika.gupta at nxp.com>
> Signed-off-by: Aneesh Bansal <aneesh.bansal at nxp.com>
> Signed-off-by: Sumit Garg <sumit.garg at nxp.com>
> ---
> Changes in v2:
> Patches rebased
>
> Changes in v3:
> Patches rebased
>
> Changes in v4:
> Generic changes in lib, drivers, common Makefiles removed from
> this patchset. Rebased this patchset on top of patch [1], so this
> patchset is dependent on patch [1].
>
> [1]https://patchwork.ozlabs.org/patch/627664/
>
> arch/powerpc/cpu/mpc8xxx/fsl_pamu.c | 8 +++++
> arch/powerpc/cpu/mpc8xxx/pamu_table.c | 8 +++++
> arch/powerpc/include/asm/fsl_secure_boot.h | 28 ++++++++++++++++
> board/freescale/common/fsl_chain_of_trust.c | 50 +++++++++++++++++++++++++++++
> drivers/crypto/fsl/jr.c | 16 +++++++++
> drivers/mtd/nand/fsl_ifc_spl.c | 24 ++++++++++++++
> include/fsl_validate.h | 1 +
> 7 files changed, 135 insertions(+)
>
> diff --git a/arch/powerpc/cpu/mpc8xxx/fsl_pamu.c b/arch/powerpc/cpu/mpc8xxx/fsl_pamu.c
> index 9421f1e..ede8e66 100644
> --- a/arch/powerpc/cpu/mpc8xxx/fsl_pamu.c
> +++ b/arch/powerpc/cpu/mpc8xxx/fsl_pamu.c
> @@ -239,15 +239,23 @@ int pamu_init(void)
> spaact_size = sizeof(struct paace) * NUM_SPAACT_ENTRIES;
>
> /* Allocate space for Primary PAACT Table */
> +#if (defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_PPAACT_ADDR))
> + ppaact = (void *)CONFIG_SPL_PPAACT_ADDR;
> +#else
> ppaact = memalign(PAMU_TABLE_ALIGNMENT, ppaact_size);
> if (!ppaact)
> return -1;
> +#endif
> memset(ppaact, 0, ppaact_size);
>
> /* Allocate space for Secondary PAACT Table */
> +#if (defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_SPAACT_ADDR))
> + sec = (void *)CONFIG_SPL_SPAACT_ADDR;
> +#else
> sec = memalign(PAMU_TABLE_ALIGNMENT, spaact_size);
> if (!sec)
> return -1;
> +#endif
> memset(sec, 0, spaact_size);
>
> ppaact_phys = virt_to_phys((void *)ppaact);
> diff --git a/arch/powerpc/cpu/mpc8xxx/pamu_table.c b/arch/powerpc/cpu/mpc8xxx/pamu_table.c
> index 26c5ea4..a8e6f51 100644
> --- a/arch/powerpc/cpu/mpc8xxx/pamu_table.c
> +++ b/arch/powerpc/cpu/mpc8xxx/pamu_table.c
> @@ -28,6 +28,14 @@ void construct_pamu_addr_table(struct pamu_addr_tbl *tbl, int *num_entries)
>
> i++;
> #endif
> +#if (defined(CONFIG_SPL_BUILD) && (CONFIG_SYS_INIT_L3_VADDR))
> + tbl->start_addr[i] =
> + (uint64_t)virt_to_phys((void *)CONFIG_SYS_INIT_L3_VADDR);
> + tbl->size[i] = 256 * 1024; /* 256K CPC flash */
> + tbl->end_addr[i] = tbl->start_addr[i] + tbl->size[i] - 1;
> +
> + i++;
> +#endif
> debug("PAMU address\t\t\tsize\n");
> for (j = 0; j < i ; j++)
> debug("%llx \t\t\t%llx\n", tbl->start_addr[j], tbl->size[j]);
> diff --git a/arch/powerpc/include/asm/fsl_secure_boot.h b/arch/powerpc/include/asm/fsl_secure_boot.h
> index 826f9c9..99eec7f 100644
> --- a/arch/powerpc/include/asm/fsl_secure_boot.h
> +++ b/arch/powerpc/include/asm/fsl_secure_boot.h
> @@ -72,6 +72,32 @@
>
> #ifdef CONFIG_CHAIN_OF_TRUST
>
> +#ifdef CONFIG_SPL_BUILD
> +#define CONFIG_SPL_DM 1
> +#define CONFIG_SPL_CRYPTO_SUPPORT
> +#define CONFIG_SPL_HASH_SUPPORT
> +#define CONFIG_SPL_RSA
> +#define CONFIG_SPL_DRIVERS_MISC_SUPPORT
> +/*
> + * PPAACT and SPAACT table for PAMU must be placed on DDR after DDR init
> + * due to space crunch on CPC and thus malloc will not work.
> + */
> +#define CONFIG_SPL_PPAACT_ADDR 0x2e000000
> +#define CONFIG_SPL_SPAACT_ADDR 0x2f000000
> +#define CONFIG_SPL_JR0_LIODN_S 454
> +#define CONFIG_SPL_JR0_LIODN_NS 458
> +/*
> + * Define the key hash for U-Boot here if public/private key pair used to
> + * sign U-boot are different from the SRK hash put in the fuse
> + * Example of defining KEY_HASH is
> + * #define CONFIG_SPL_UBOOT_KEY_HASH \
> + * "41066b564c6ffcef40ccbc1e0a5d0d519604000c785d97bbefd25e4d288d1c8b"
> + * else leave it defined as NULL
> + */
> +
> +#define CONFIG_SPL_UBOOT_KEY_HASH NULL
> +#endif /* ifdef CONFIG_SPL_BUILD */
> +
> #define CONFIG_CMD_ESBC_VALIDATE
> #define CONFIG_CMD_BLOB
> #define CONFIG_FSL_SEC_MON
> @@ -82,6 +108,7 @@
> #define CONFIG_FSL_CAAM
> #endif
>
> +#ifndef CONFIG_SPL_BUILD
> /* fsl_setenv_chain_of_trust() must be called from
> * board_late_init()
> */
> @@ -119,5 +146,6 @@
> #endif /* #ifdef CONFIG_BOOTSCRIPT_COPY_RAM */
>
> #include <config_fsl_chain_trust.h>
> +#endif /* #ifndef CONFIG_SPL_BUILD */
> #endif /* #ifdef CONFIG_CHAIN_OF_TRUST */
> #endif
> diff --git a/board/freescale/common/fsl_chain_of_trust.c b/board/freescale/common/fsl_chain_of_trust.c
> index ecfcc82..992babf 100644
> --- a/board/freescale/common/fsl_chain_of_trust.c
> +++ b/board/freescale/common/fsl_chain_of_trust.c
> @@ -6,7 +6,17 @@
>
> #include <common.h>
> #include <fsl_validate.h>
> +#include <fsl_secboot_err.h>
> #include <fsl_sfp.h>
> +#include <dm/root.h>
> +
> +#ifdef CONFIG_ADDR_MAP
> +#include <asm/mmu.h>
> +#endif
> +
> +#ifdef CONFIG_FSL_CORENET
> +#include <asm/fsl_pamu.h>
> +#endif
>
> #ifdef CONFIG_LS102XA
> #include <asm/arch/immap_ls102xa.h>
> @@ -52,6 +62,7 @@ int fsl_check_boot_mode_secure(void)
> return 0;
> }
>
> +#ifndef CONFIG_SPL_BUILD
> int fsl_setenv_chain_of_trust(void)
> {
> /* Check Boot Mode
> @@ -68,3 +79,42 @@ int fsl_setenv_chain_of_trust(void)
> setenv("bootcmd", CONFIG_CHAIN_BOOT_CMD);
> return 0;
> }
> +#endif
> +
> +#ifdef CONFIG_SPL_BUILD
> +void spl_validate_uboot(uint32_t hdr_addr, uintptr_t img_addr)
> +{
> + int res;
> +
> + /* Check Boot Mode
> + * If Boot Mode is Non-Secure, skip validation
> + */
> + if (fsl_check_boot_mode_secure() == 0)
> + return;
> +
> + printf("SPL: Validating U-Boot image\n");
> +
> +#ifdef CONFIG_ADDR_MAP
> + init_addr_map();
> +#endif
> +
> +#ifdef CONFIG_FSL_CORENET
> + if (pamu_init() < 0)
> + fsl_secboot_handle_error(ERROR_ESBC_PAMU_INIT);
> +#endif
> +
> +#ifdef CONFIG_FSL_CAAM
> + if (sec_init() < 0)
> + fsl_secboot_handle_error(ERROR_ESBC_SEC_INIT);
> +#endif
> +
> +#if defined(CONFIG_DM)
> + dm_init_and_scan(false);
> +#endif
> + res = fsl_secboot_validate(hdr_addr, CONFIG_SPL_UBOOT_KEY_HASH,
> + &img_addr);
> +
> + if (res == 0)
> + printf("SPL: Validation of U-boot successful\n");
> +}
> +#endif
> diff --git a/drivers/crypto/fsl/jr.c b/drivers/crypto/fsl/jr.c
> index 510fa4e..1d4dd32 100644
> --- a/drivers/crypto/fsl/jr.c
> +++ b/drivers/crypto/fsl/jr.c
> @@ -599,10 +599,26 @@ int sec_init_idx(uint8_t sec_idx)
> sec_out32(&sec->mcfgr, mcr);
>
> #ifdef CONFIG_FSL_CORENET
> +#ifdef CONFIG_SPL_BUILD
> + /* For SPL Build, Set the Liodns in SEC JR0 for
> + * creating PAMU entries corresponding to these.
> + * For normal build, these are set in set_liodns().
> + */
> + liodn_ns = CONFIG_SPL_JR0_LIODN_NS & JRNSLIODN_MASK;
> + liodn_s = CONFIG_SPL_JR0_LIODN_S & JRSLIODN_MASK;
> +
> + liodnr = sec_in32(&sec->jrliodnr[0].ls) &
> + ~(JRNSLIODN_MASK | JRSLIODN_MASK);
> + liodnr = liodnr |
> + (liodn_ns << JRNSLIODN_SHIFT) |
> + (liodn_s << JRSLIODN_SHIFT);
> + sec_out32(&sec->jrliodnr[0].ls, liodnr);
> +#else
> liodnr = sec_in32(&sec->jrliodnr[0].ls);
> liodn_ns = (liodnr & JRNSLIODN_MASK) >> JRNSLIODN_SHIFT;
> liodn_s = (liodnr & JRSLIODN_MASK) >> JRSLIODN_SHIFT;
> #endif
> +#endif
>
> ret = jr_init(sec_idx);
> if (ret < 0) {
> diff --git a/drivers/mtd/nand/fsl_ifc_spl.c b/drivers/mtd/nand/fsl_ifc_spl.c
> index cbeb74a..30aa966 100644
> --- a/drivers/mtd/nand/fsl_ifc_spl.c
> +++ b/drivers/mtd/nand/fsl_ifc_spl.c
> @@ -11,6 +11,9 @@
> #include <asm/io.h>
> #include <fsl_ifc.h>
> #include <linux/mtd/nand.h>
> +#ifdef CONFIG_CHAIN_OF_TRUST
> +#include <fsl_validate.h>
> +#endif
>
> static inline int is_blank(uchar *addr, int page_size)
> {
> @@ -268,6 +271,27 @@ void nand_boot(void)
> */
> flush_cache(CONFIG_SYS_NAND_U_BOOT_DST, CONFIG_SYS_NAND_U_BOOT_SIZE);
> #endif
> +
> +#ifdef CONFIG_CHAIN_OF_TRUST
> + /*
> + * As U-Boot header is appended at end of U-boot image, so
> + * calculate U-boot header address using U-boot header size.
> + */
> +#define CONFIG_U_BOOT_HDR_ADDR \
> + ((CONFIG_SYS_NAND_U_BOOT_START + \
> + CONFIG_SYS_NAND_U_BOOT_SIZE) - \
> + CONFIG_U_BOOT_HDR_SIZE)
> + spl_validate_uboot(CONFIG_U_BOOT_HDR_ADDR,
> + CONFIG_SYS_NAND_U_BOOT_START);
> + /*
> + * In case of failure in validation, spl_validate_uboot would
> + * not return back in case of Production environment with ITS=1.
> + * Thus U-Boot will not start.
> + * In Development environment (ITS=0 and SB_EN=1), the function
> + * may return back in case of non-fatal failures.
> + */
> +#endif
> +
> uboot = (void *)CONFIG_SYS_NAND_U_BOOT_START;
> uboot();
> }
> diff --git a/include/fsl_validate.h b/include/fsl_validate.h
> index a71e1ce..7695b30 100644
> --- a/include/fsl_validate.h
> +++ b/include/fsl_validate.h
> @@ -254,4 +254,5 @@ int fsl_secboot_blob_decap(cmd_tbl_t *cmdtp, int flag, int argc,
>
> int fsl_check_boot_mode_secure(void);
> int fsl_setenv_chain_of_trust(void);
> +void spl_validate_uboot(uint32_t hdr_addr, uintptr_t img_addr);
> #endif
> --
> 1.8.1.4
>
More information about the U-Boot
mailing list