[U-Boot] [PATCH v3 2/5] usb: xhci: fsl: code cleanup for device tree fixup for fsl usb controllers

[Marek Vasut]

On 06/10/2016 05:47 AM, Sriram Dash wrote:
>> -----Original Message-----
>> From: Marek Vasut [mailto:marex at denx.de]
>> Sent: Thursday, June 09, 2016 7:01 PM
>> To: Sriram Dash <sriram.dash at nxp.com>; u-boot at lists.denx.de
>> Cc: york sun <york.sun at nxp.com>; albert.u.boot at aribaud.net; Rajesh Bhagat
>> <rajesh.bhagat at nxp.com>
>> Subject: Re: [PATCH v3 2/5] usb: xhci: fsl: code cleanup for device tree fixup for fsl
>> usb controllers

Would you please fix your mailer to omit this useless header ?

[...]

>>> diff --git a/include/fsl_usb.h b/include/fsl_usb.h index
>>> 187e384..882a5f5 100644
>>> --- a/include/fsl_usb.h
>>> +++ b/include/fsl_usb.h
>>> @@ -85,6 +85,12 @@ struct ccsr_usb_phy {  #define
>>> CONFIG_SYS_FSL_USB_SQUELCH_PROG_MASK 0x07  #endif
>>>
>>> +/* USB Controllers */
>>> +#define FSL_USB2_MPH	"fsl-usb2-mph"
>>> +#define FSL_USB2_DR	"fsl-usb2-dr"
>>> +#define USB2_CI		"usb2-ci"

What is this "usb2-ci" string ? Is this some DT property or DT
compatible property or just some random string?

>>> +#define SNPS_DWC3	"snps,dwc3"
>>
>> Is this needed as a global macro or can it be local to fsl-dt-fixup.c ?
>>
> 
> Currently, the macro are only being used for dt fixup for fsl usb.
> However, in the near future, they might be needed for some other purpose,
> for example, board specific settings.

If they will be used for other purpose, then they can be moved. They are
local now, so keep them local.

> So, i think i will stick with the global macro.
> 
>>>  /* USB Erratum Checking code */
>>>  #ifdef CONFIG_PPC
>>>  static inline bool has_dual_phy(void)
>>>
>>
>>
>> --
>> Best regards,
>> Marek Vasut


-- 
Best regards,
Marek Vasut