[U-Boot] [PATCH v3 2/5] usb: xhci: fsl: code cleanup for device tree fixup for fsl usb controllers

[Sriram Dash]

>From: Marek Vasut [mailto:marex at denx.de]
>On 06/10/2016 07:20 AM, Sriram Dash wrote:
>>> From: Marek Vasut [mailto:marex at denx.de] On 06/10/2016 05:47 AM,
>>> Sriram Dash wrote:
>>>>> -----Original Message-----
>>>>> From: Marek Vasut [mailto:marex at denx.de]
>>>>> Sent: Thursday, June 09, 2016 7:01 PM
>>>>> To: Sriram Dash <sriram.dash at nxp.com>; u-boot at lists.denx.de
>>>>> Cc: york sun <york.sun at nxp.com>; albert.u.boot at aribaud.net; Rajesh
>>>>> Bhagat <rajesh.bhagat at nxp.com>
>>>>> Subject: Re: [PATCH v3 2/5] usb: xhci: fsl: code cleanup for device
>>>>> tree fixup for fsl usb controllers
>>>
>>> Would you please fix your mailer to omit this useless header ?
>>>
>>> [...]
>>>
>>
>> Will take care next time onwards.
>>
>>>>>> diff --git a/include/fsl_usb.h b/include/fsl_usb.h index
>>>>>> 187e384..882a5f5 100644
>>>>>> --- a/include/fsl_usb.h
>>>>>> +++ b/include/fsl_usb.h
>>>>>> @@ -85,6 +85,12 @@ struct ccsr_usb_phy {  #define
>>>>>> CONFIG_SYS_FSL_USB_SQUELCH_PROG_MASK 0x07  #endif
>>>>>>
>>>>>> +/* USB Controllers */
>>>>>> +#define FSL_USB2_MPH	"fsl-usb2-mph"
>>>>>> +#define FSL_USB2_DR	"fsl-usb2-dr"
>>>>>> +#define USB2_CI		"usb2-ci"
>>>
>>> What is this "usb2-ci" string ? Is this some DT property or DT
>>> compatible property or just some random string?
>>>
>>
>> Currently, for chipidea usb 2 controller, there is no generic DT
>> compatible property.
>
>Linux kernel documentation says there is "chipidea,usb2":
>
>https://www.kernel.org/doc/Documentation/devicetree/bindings/usb/ci-hdrc-
>usb2.txt
>
>> Some names used are "qcom,ci-hdrc",
>> "chipidea,usb2","fsl-usb2-dr","fsl-usb2-mph ". This string "usb2-ci"
>> is not used currently for DT property.
>
>The "chipidea,usb2" is generic one, all the others are either heritage from the past
>or more precise specifiers of the IP block. Do not invent yet another new
>compatible property in this case, it makes zero sense.
>

Ok. Will change the "usb2-ci" into "chipidea,usb2" and "USB2_CI" into 
CHIPIDEA_USB2 in v4.

>>>>>> +#define SNPS_DWC3	"snps,dwc3"
>>>>>
>>>>> Is this needed as a global macro or can it be local to fsl-dt-fixup.c ?
>>>>>
>>>>
>>>> Currently, the macro are only being used for dt fixup for fsl usb.
>>>> However, in the near future, they might be needed for some other
>>>> purpose, for example, board specific settings.
>>>
>>> If they will be used for other purpose, then they can be moved. They
>>> are local now, so keep them local.
>>>
>>
>> Ok. I will move the global macro to fsl-dt-fixup.c.
>>
>>>> So, i think i will stick with the global macro.
>>>>
>>>>>>  /* USB Erratum Checking code */
>>>>>>  #ifdef CONFIG_PPC
>>>>>>  static inline bool has_dual_phy(void)
>>>>>>
>>>>>
>>>>>
>>>>> --
>>>>> Best regards,
>>>>> Marek Vasut
>>>
>>>
>>> --
>>> Best regards,
>>> Marek Vasut
>
>
>--
>Best regards,
>Marek Vasut