[U-Boot] [PATCH RESEND 2/2 v2] lib: Add hexdump
Langer, Thomas
thomas.langer at intel.com
Fri Jun 10 17:31:30 CEST 2016
Hello Alexey,
This feature is already available in u-boot, please look for 'print_buffer'.
Best regards,
Thomas
> -----Original Message-----
> From: U-Boot [mailto:u-boot-bounces at lists.denx.de] On Behalf Of Alexey
> Brodkin
> Sent: Friday, June 10, 2016 2:43 PM
> To: u-boot at lists.denx.de
> Cc: Tom Rini <trini at konsulko.com>; Alexey Brodkin
> <Alexey.Brodkin at synopsys.com>
> Subject: [U-Boot] [PATCH RESEND 2/2 v2] lib: Add hexdump
>
> Often during debugging session it's very interesting to see
> what data we were dealing with. For example what we write or read
> to/from memory or peripherals.
>
> This change introduces functions that allow to dump binary
> data with one simple function invocation like:
> ------------------->8----------------
> print_hex_dump_bytes("", DUMP_PREFIX_OFFSET, buf, len);
> ------------------->8----------------
>
> which gives us the following:
> ------------------->8----------------
> 00000000: f2 b7 c9 88 62 61 75 64 72 61 74 65 3d 31 31 35 ....baudrate=115
> 00000010: 32 30 30 00 62 6f 6f 74 61 72 67 73 3d 63 6f 6e 200.bootargs=con
> 00000020: 73 6f 6c 65 3d 74 74 79 53 33 2c 31 31 35 32 30 sole=ttyS3,11520
> 00000030: 30 6e 38 00 62 6f 6f 74 64 65 6c 61 79 3d 33 00 0n8.bootdelay=3.
> 00000040: 62 6f 6f 74 66 69 6c 65 3d 75 49 6d 61 67 65 00 bootfile=uImage.
> 00000050: 66 64 74 63 6f 6e 74 72 6f 6c 61 64 64 72 3d 39 fdtcontroladdr=9
> 00000060: 66 66 62 31 62 61 30 00 6c 6f 61 64 61 64 64 72 ffb1ba0.loadaddr
> 00000070: 3d 30 78 38 32 30 30 30 30 30 30 00 73 74 64 65
> =0x82000000.stde
> 00000080: 72 72 3d 73 65 72 69 61 6c 30 40 65 30 30 32 32
> rr=serial0 at e0022
> 00000090: 30 30 30 00 73 74 64 69 6e 3d 73 65 72 69 61 6c 000.stdin=serial
> 000000a0: 30 40 65 30 30 32 32 30 30 30 00 73 74 64 6f 75
> 0 at e0022000.stdou
> 000000b0: 74 3d 73 65 72 69 61 6c 30 40 65 30 30 32 32 30
> t=serial0 at e00220
> 000000c0: 30 30 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00..............
> ...
> ------------------->8----------------
>
> Source of hexdump.c was copied from Linux kernel v4.7-rc2.
>
> Signed-off-by: Alexey Brodkin <abrodkin at synopsys.com>
> Reviewed-by: Stefan Roese <sr at denx.de>
> Cc: Tom Rini <trini at konsulko.com>
>
> ---
>
> Changes v1 -> v2:
> * Move hexdump definitions to a separate header.
> * Move helper funcions to the header so they might be used even if
> CONFIG_HEXDUMP is not enabled and if not used they will not occupy
> extra bytes of memory being "static inline" ones.
> * While at it replace its own hex_asc[], hex_asc_{lo|hi}() and
> pack_hex_byte() in lib/vsprintf.c with generic ones from hexdump.
> * In print_hex_dump() revert back first parametr for debug level,
> otherwise existing users of the function will be broken.
>
> include/common.h | 1 +
> include/hexdump.h | 108 +++++++++++++++++++++++
> include/linux/compat.h | 1 -
> lib/Kconfig | 5 ++
> lib/Makefile | 1 +
> lib/hexdump.c | 233
> +++++++++++++++++++++++++++++++++++++++++++++++++
> lib/vsprintf.c | 17 +---
> 7 files changed, 351 insertions(+), 15 deletions(-)
> create mode 100644 include/hexdump.h
> create mode 100644 lib/hexdump.c
>
> diff --git a/include/common.h b/include/common.h
> index f9f4605..51a438c 100644
> --- a/include/common.h
> +++ b/include/common.h
> @@ -23,6 +23,7 @@ typedef volatile unsigned char vu_char;
> #include <linux/stringify.h>
> #include <asm/ptrace.h>
> #include <stdarg.h>
> +#include <hexdump.h>
> #include <linux/kernel.h>
> #if defined(CONFIG_PCI) && defined(CONFIG_4xx)
> #include <pci.h>
> diff --git a/include/hexdump.h b/include/hexdump.h
> new file mode 100644
> index 0000000..de2e565
> --- /dev/null
> +++ b/include/hexdump.h
> @@ -0,0 +1,108 @@
> +/*
> + * Copyright (C) 2016 Synopsys, Inc. All rights reserved.
> + *
> + * SPDX-License-Identifier: GPL-2.0+
> + */
> +
> +#ifndef HEXDUMP_H
> +#define HEXDUMP_H
> +
> +#include <linux/ctype.h>
> +
> +enum {
> + DUMP_PREFIX_NONE,
> + DUMP_PREFIX_ADDRESS,
> + DUMP_PREFIX_OFFSET
> +};
> +
> +extern const char hex_asc[];
> +#define hex_asc_lo(x) hex_asc[((x) & 0x0f)]
> +#define hex_asc_hi(x) hex_asc[((x) & 0xf0) >> 4]
> +
> +static inline char *hex_byte_pack(char *buf, u8 byte)
> +{
> + *buf++ = hex_asc_hi(byte);
> + *buf++ = hex_asc_lo(byte);
> + return buf;
> +}
> +
> +/**
> + * hex_to_bin - convert a hex digit to its real value
> + * @ch: ascii character represents hex digit
> + *
> + * hex_to_bin() converts one hex digit to its actual value or -1 in case of bad
> + * input.
> + */
> +static inline int hex_to_bin(char ch)
> +{
> + if ((ch >= '0') && (ch <= '9'))
> + return ch - '0';
> + ch = tolower(ch);
> + if ((ch >= 'a') && (ch <= 'f'))
> + return ch - 'a' + 10;
> + return -1;
> +}
> +
> +/**
> + * hex2bin - convert an ascii hexadecimal string to its binary representation
> + * @dst: binary result
> + * @src: ascii hexadecimal string
> + * @count: result length
> + *
> + * Return 0 on success, -1 in case of bad input.
> + */
> +static inline int hex2bin(u8 *dst, const char *src, size_t count)
> +{
> + while (count--) {
> + int hi = hex_to_bin(*src++);
> + int lo = hex_to_bin(*src++);
> +
> + if ((hi < 0) || (lo < 0))
> + return -1;
> +
> + *dst++ = (hi << 4) | lo;
> + }
> + return 0;
> +}
> +
> +/**
> + * bin2hex - convert binary data to an ascii hexadecimal string
> + * @dst: ascii hexadecimal result
> + * @src: binary data
> + * @count: binary data length
> + */
> +static inline char *bin2hex(char *dst, const void *src, size_t count)
> +{
> + const unsigned char *_src = src;
> +
> + while (count--)
> + dst = hex_byte_pack(dst, *_src++);
> + return dst;
> +}
> +
> +
> +#ifdef CONFIG_HEXDUMP
> +int hex_dump_to_buffer(const void *buf, size_t len, int rowsize, int
> groupsize,
> + char *linebuf, size_t linebuflen, bool ascii);
> +void print_hex_dump(const char *level, const char *prefix_str, int
> prefix_type,
> + int rowsize, int groupsize, const void *buf, size_t len,
> + bool ascii);
> +void print_hex_dump_bytes(const char *prefix_str, int prefix_type,
> + const void *buf, size_t len);
> +#else /* !CONFIG_HEXDUMP */
> +/*
> + * Some code in U-Boot copy-pasted from Linux kernel uses both
> + * functions below so to keep stuff compilable we keep these stubs here.
> + */
> +static inline void print_hex_dump(const char *level, const char *prefix_str,
> + int prefix_type, int rowsize, int groupsize,
> + const void *buf, size_t len, bool ascii)
> +{
> +}
> +static inline void print_hex_dump_bytes(const char *prefix_str, int
> prefix_type,
> + const void *buf, size_t len)
> +{
> +}
> +#endif /* CONFIG_HEXDUMP */
> +
> +#endif /* HEXDUMP_H */
> diff --git a/include/linux/compat.h b/include/linux/compat.h
> index 0ce7d65..074a85e 100644
> --- a/include/linux/compat.h
> +++ b/include/linux/compat.h
> @@ -193,7 +193,6 @@ typedef unsigned long blkcnt_t;
> #define init_waitqueue_head(...) do { } while (0)
> #define wait_event_interruptible(...) 0
> #define wake_up_interruptible(...) do { } while (0)
> -#define print_hex_dump(...) do { } while (0)
> #define dump_stack(...) do { } while (0)
>
> #define task_pid_nr(x) 0
> diff --git a/lib/Kconfig b/lib/Kconfig
> index 2b97c2b..a563b5e 100644
> --- a/lib/Kconfig
> +++ b/lib/Kconfig
> @@ -128,6 +128,11 @@ config ERRNO_STR
> - if errno is null or positive number - a pointer to "Success" message
> - if errno is negative - a pointer to errno related message
>
> +config HEXDUMP
> + bool "Enable hexdump"
> + help
> + This enables functions for printing dumps of binary data.
> +
> config OF_LIBFDT
> bool "Enable the FDT library"
> default y if OF_CONTROL
> diff --git a/lib/Makefile b/lib/Makefile
> index 02dfa29..1bf7c37 100644
> --- a/lib/Makefile
> +++ b/lib/Makefile
> @@ -76,6 +76,7 @@ obj-y += membuff.o
> obj-$(CONFIG_REGEX) += slre.o
> obj-y += string.o
> obj-y += time.o
> +obj-y += hexdump.o
> obj-$(CONFIG_TRACE) += trace.o
> obj-$(CONFIG_LIB_UUID) += uuid.o
> obj-$(CONFIG_LIB_RAND) += rand.o
> diff --git a/lib/hexdump.c b/lib/hexdump.c
> new file mode 100644
> index 0000000..ffee5ce
> --- /dev/null
> +++ b/lib/hexdump.c
> @@ -0,0 +1,233 @@
> +/*
> + * lib/hexdump.c
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation. See README and COPYING
> for
> + * more details.
> + */
> +
> +#include <common.h>
> +#include <linux/ctype.h>
> +#include <linux/compat.h>
> +#include <linux/log2.h>
> +#include <asm/unaligned.h>
> +
> +const char hex_asc[] = "0123456789abcdef";
> +const char hex_asc_upper[] = "0123456789ABCDEF";
> +
> +#ifdef CONFIG_HEXDUMP
> +/**
> + * hex_dump_to_buffer - convert a blob of data to "hex ASCII" in memory
> + * @buf: data blob to dump
> + * @len: number of bytes in the @buf
> + * @rowsize: number of bytes to print per line; must be 16 or 32
> + * @groupsize: number of bytes to print at a time (1, 2, 4, 8; default = 1)
> + * @linebuf: where to put the converted data
> + * @linebuflen: total size of @linebuf, including space for terminating NUL
> + * @ascii: include ASCII after the hex output
> + *
> + * hex_dump_to_buffer() works on one "line" of output at a time, i.e.,
> + * 16 or 32 bytes of input data converted to hex + ASCII output.
> + *
> + * Given a buffer of u8 data, hex_dump_to_buffer() converts the input data
> + * to a hex + ASCII dump at the supplied memory location.
> + * The converted output is always NUL-terminated.
> + *
> + * E.g.:
> + * hex_dump_to_buffer(frame->data, frame->len, 16, 1,
> + * linebuf, sizeof(linebuf), true);
> + *
> + * example output buffer:
> + * 40 41 42 43 44 45 46 47 48 49 4a 4b 4c 4d 4e 4f @ABCDEFGHIJKLMNO
> + *
> + * Return:
> + * The amount of bytes placed in the buffer without terminating NUL. If the
> + * output was truncated, then the return value is the number of bytes
> + * (excluding the terminating NUL) which would have been written to the
> final
> + * string if enough space had been available.
> + */
> +int hex_dump_to_buffer(const void *buf, size_t len, int rowsize, int
> groupsize,
> + char *linebuf, size_t linebuflen, bool ascii)
> +{
> + const u8 *ptr = buf;
> + int ngroups;
> + u8 ch;
> + int j, lx = 0;
> + int ascii_column;
> + int ret;
> +
> + if (rowsize != 16 && rowsize != 32)
> + rowsize = 16;
> +
> + if (len > rowsize) /* limit to one line at a time */
> + len = rowsize;
> + if (!is_power_of_2(groupsize) || groupsize > 8)
> + groupsize = 1;
> + if ((len % groupsize) != 0) /* no mixed size output */
> + groupsize = 1;
> +
> + ngroups = len / groupsize;
> + ascii_column = rowsize * 2 + rowsize / groupsize + 1;
> +
> + if (!linebuflen)
> + goto overflow1;
> +
> + if (!len)
> + goto nil;
> +
> + if (groupsize == 8) {
> + const u64 *ptr8 = buf;
> +
> + for (j = 0; j < ngroups; j++) {
> + ret = snprintf(linebuf + lx, linebuflen - lx,
> + "%s%16.16llx", j ? " " : "",
> + get_unaligned(ptr8 + j));
> + if (ret >= linebuflen - lx)
> + goto overflow1;
> + lx += ret;
> + }
> + } else if (groupsize == 4) {
> + const u32 *ptr4 = buf;
> +
> + for (j = 0; j < ngroups; j++) {
> + ret = snprintf(linebuf + lx, linebuflen - lx,
> + "%s%8.8x", j ? " " : "",
> + get_unaligned(ptr4 + j));
> + if (ret >= linebuflen - lx)
> + goto overflow1;
> + lx += ret;
> + }
> + } else if (groupsize == 2) {
> + const u16 *ptr2 = buf;
> +
> + for (j = 0; j < ngroups; j++) {
> + ret = snprintf(linebuf + lx, linebuflen - lx,
> + "%s%4.4x", j ? " " : "",
> + get_unaligned(ptr2 + j));
> + if (ret >= linebuflen - lx)
> + goto overflow1;
> + lx += ret;
> + }
> + } else {
> + for (j = 0; j < len; j++) {
> + if (linebuflen < lx + 2)
> + goto overflow2;
> + ch = ptr[j];
> + linebuf[lx++] = hex_asc_hi(ch);
> + if (linebuflen < lx + 2)
> + goto overflow2;
> + linebuf[lx++] = hex_asc_lo(ch);
> + if (linebuflen < lx + 2)
> + goto overflow2;
> + linebuf[lx++] = ' ';
> + }
> + if (j)
> + lx--;
> + }
> + if (!ascii)
> + goto nil;
> +
> + while (lx < ascii_column) {
> + if (linebuflen < lx + 2)
> + goto overflow2;
> + linebuf[lx++] = ' ';
> + }
> + for (j = 0; j < len; j++) {
> + if (linebuflen < lx + 2)
> + goto overflow2;
> + ch = ptr[j];
> + linebuf[lx++] = (isascii(ch) && isprint(ch)) ? ch : '.';
> + }
> +nil:
> + linebuf[lx] = '\0';
> + return lx;
> +overflow2:
> + linebuf[lx++] = '\0';
> +overflow1:
> + return ascii ? ascii_column + len : (groupsize * 2 + 1) * ngroups - 1;
> +}
> +
> +/**
> + * print_hex_dump - print a text hex dump to syslog for a binary blob of
> data
> + * @level: kernel log level (e.g. KERN_DEBUG)
> + * @prefix_str: string to prefix each line with;
> + * caller supplies trailing spaces for alignment if desired
> + * @prefix_type: controls whether prefix of an offset, address, or none
> + * is printed (%DUMP_PREFIX_OFFSET, %DUMP_PREFIX_ADDRESS,
> %DUMP_PREFIX_NONE)
> + * @rowsize: number of bytes to print per line; must be 16 or 32
> + * @groupsize: number of bytes to print at a time (1, 2, 4, 8; default = 1)
> + * @buf: data blob to dump
> + * @len: number of bytes in the @buf
> + * @ascii: include ASCII after the hex output
> + *
> + * Given a buffer of u8 data, print_hex_dump() prints a hex + ASCII dump
> + * to the kernel log at the specified kernel log level, with an optional
> + * leading prefix.
> + *
> + * print_hex_dump() works on one "line" of output at a time, i.e.,
> + * 16 or 32 bytes of input data converted to hex + ASCII output.
> + * print_hex_dump() iterates over the entire input @buf, breaking it into
> + * "line size" chunks to format and print.
> + *
> + * E.g.:
> + * print_hex_dump(KERN_DEBUG, "raw data: ", DUMP_PREFIX_ADDRESS,
> + * 16, 1, frame->data, frame->len, true);
> + *
> + * Example output using %DUMP_PREFIX_OFFSET and 1-byte mode:
> + * 0009ab42: 40 41 42 43 44 45 46 47 48 49 4a 4b 4c 4d 4e 4f
> @ABCDEFGHIJKLMNO
> + * Example output using %DUMP_PREFIX_ADDRESS and 4-byte mode:
> + * ffffffff88089af0: 73727170 77767574 7b7a7978 7f7e7d7c
> pqrstuvwxyz{|}~.
> + */
> +void print_hex_dump(const char *level, const char *prefix_str, int
> prefix_type,
> + int rowsize, int groupsize,
> + const void *buf, size_t len, bool ascii)
> +{
> + const u8 *ptr = buf;
> + int i, linelen, remaining = len;
> + char linebuf[32 * 3 + 2 + 32 + 1];
> +
> + if (rowsize != 16 && rowsize != 32)
> + rowsize = 16;
> +
> + for (i = 0; i < len; i += rowsize) {
> + linelen = min(remaining, rowsize);
> + remaining -= rowsize;
> +
> + hex_dump_to_buffer(ptr + i, linelen, rowsize, groupsize,
> + linebuf, sizeof(linebuf), ascii);
> +
> + switch (prefix_type) {
> + case DUMP_PREFIX_ADDRESS:
> + printf("%s%p: %s\n", prefix_str, ptr + i, linebuf);
> + break;
> + case DUMP_PREFIX_OFFSET:
> + printf("%s%.8x: %s\n", prefix_str, i, linebuf);
> + break;
> + default:
> + printf("%s%s\n", prefix_str, linebuf);
> + break;
> + }
> + }
> +}
> +
> +/**
> + * print_hex_dump_bytes - shorthand form of print_hex_dump() with
> default params
> + * @prefix_str: string to prefix each line with;
> + * caller supplies trailing spaces for alignment if desired
> + * @prefix_type: controls whether prefix of an offset, address, or none
> + * is printed (%DUMP_PREFIX_OFFSET, %DUMP_PREFIX_ADDRESS,
> %DUMP_PREFIX_NONE)
> + * @buf: data blob to dump
> + * @len: number of bytes in the @buf
> + *
> + * Calls print_hex_dump(), with log level of KERN_DEBUG,
> + * rowsize of 16, groupsize of 1, and ASCII output included.
> + */
> +void print_hex_dump_bytes(const char *prefix_str, int prefix_type,
> + const void *buf, size_t len)
> +{
> + print_hex_dump(KERN_DEBUG, prefix_str, prefix_type, 16, 1,
> + buf, len, true);
> +}
> +
> +#endif /* CONFIG_HEXDUMP */
> diff --git a/lib/vsprintf.c b/lib/vsprintf.c
> index 874a295..c0a0aaa 100644
> --- a/lib/vsprintf.c
> +++ b/lib/vsprintf.c
> @@ -271,17 +271,6 @@ static char *string(char *buf, char *end, char *s, int
> field_width,
> }
>
> #ifdef CONFIG_CMD_NET
> -static const char hex_asc[] = "0123456789abcdef";
> -#define hex_asc_lo(x) hex_asc[((x) & 0x0f)]
> -#define hex_asc_hi(x) hex_asc[((x) & 0xf0) >> 4]
> -
> -static inline char *pack_hex_byte(char *buf, u8 byte)
> -{
> - *buf++ = hex_asc_hi(byte);
> - *buf++ = hex_asc_lo(byte);
> - return buf;
> -}
> -
> static char *mac_address_string(char *buf, char *end, u8 *addr, int
> field_width,
> int precision, int flags)
> {
> @@ -291,7 +280,7 @@ static char *mac_address_string(char *buf, char
> *end, u8 *addr, int field_width,
> int i;
>
> for (i = 0; i < 6; i++) {
> - p = pack_hex_byte(p, addr[i]);
> + p = hex_byte_pack(p, addr[i]);
> if (!(flags & SPECIAL) && i != 5)
> *p++ = ':';
> }
> @@ -310,8 +299,8 @@ static char *ip6_addr_string(char *buf, char *end, u8
> *addr, int field_width,
> int i;
>
> for (i = 0; i < 8; i++) {
> - p = pack_hex_byte(p, addr[2 * i]);
> - p = pack_hex_byte(p, addr[2 * i + 1]);
> + p = hex_byte_pack(p, addr[2 * i]);
> + p = hex_byte_pack(p, addr[2 * i + 1]);
> if (!(flags & SPECIAL) && i != 7)
> *p++ = ':';
> }
> --
> 2.5.5
>
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
More information about the U-Boot
mailing list