[U-Boot] Please pull u-boot-x86

[Bin Meng]

Hi Tom,

This includes a fix to acpi madt table, and fixes to card detect pin
configuration of the SD controller on BayTrail SoC.

The following changes since commit 6b3943f1b04be60f147ee540fbd72c4c7ea89f80:

  siemens,am33x: add draco etamin board (2016-06-09 13:53:13 -0400)

are available in the git repository at:

  git://git.denx.de/u-boot-x86.git master

for you to fetch changes up to 9769e05bcf79939bad23a719982dd1f85a110f3c:

  x86: broadwell: gpio: Remove the codes to set up pin control
(2016-06-12 12:19:35 +0800)

----------------------------------------------------------------
Bin Meng (8):
      x86: ich6_gpio: Output return value of syscon_get_by_driver_data()
      x86: baytrail: Add 'reg' property in the pinctrl node
      x86: baytrail: Change fsp, emmc-boot-mode to "auto"
      x86: baytrail: Configure card detect pin of the SD controller
      x86: Update x86-pinctrl driver device-tree-bindings doc
      x86: Enable regmap and syscon for coreboot and qemu-x86
      x86: Probe pinctrl driver in cpu_init_r()
      x86: broadwell: gpio: Remove the codes to set up pin control

George McCollister (1):
      x86: acpi: Fix madt lapic generation

 arch/x86/cpu/cpu.c                                  |  5 +++++
 arch/x86/dts/bayleybay.dts                          | 22 +++++++++++++++++++++-
 arch/x86/dts/conga-qeval20-qa3-e3845.dts            | 18 +++++++++++++++++-
 arch/x86/dts/minnowmax.dts                          | 18 +++++++++++++++++-
 arch/x86/lib/acpi_table.c                           | 12 ++++++------
 configs/coreboot-x86_defconfig                      |  2 ++
 configs/qemu-x86_defconfig                          |  2 ++
 doc/device-tree-bindings/gpio/intel,x86-pinctrl.txt | 16 ++++++++--------
 drivers/gpio/intel_broadwell_gpio.c                 |  7 -------
 drivers/gpio/intel_ich6_gpio.c                      |  5 -----
 10 files changed, 78 insertions(+), 29 deletions(-)

Regards,
Bin