[U-Boot] [PULL] u-boot-atmel/master -> u-boot/master

[Andreas Bießmann]

The following changes since commit 6b3943f1b04be60f147ee540fbd72c4c7ea89f80:

  siemens,am33x: add draco etamin board (2016-06-09 13:53:13 -0400)

are available in the git repository at:

  git://git.denx.de/u-boot-atmel.git master

for you to fetch changes up to c1631c8a04f53e694dd73bbb987b97eed5188517:

  serial: atmel_usart: Add device tree support (2016-06-12 23:49:38 +0200)

----------------------------------------------------------------
Andre Renaud (6):
      at91: Add support for the AT91 slow clock controller
      net: Handle an empty bootp extension section
      arm: at91: Add a header file for the real-time clock
      at91: Correct NAND ECC register access
      at91: nand: Set up the ECC strength correctly
      arm: at91: Add support for gurnard

Andreas Bießmann (1):
      linux/compat.h: add dev_warn()

Marek Vasut (3):
      gpio: at91: Fix pullup/pulldown configuration on PIO3
      ARM: at91: sama5: Extend boot device autodetection
      ARM: at91: Fix PMC bit definitions

Simon Glass (10):
      arm: Allow skipping of low-level init with I-cache on
      bootm: Align cache flush end address correctly
      net: macb: Prepare for driver-model conversion
      net: macb: Flush correct cache portion when sending
      net: macb: Convert to driver model
      arm: at91: dts: Bring in device tree file for AT91SAM9G45
      at91: Add driver-model GPIO devices for AT91SAM9G45
      at91: video: Prepare for driver-model conversion
      at91: video: Support driver-model for the LCD driver
      fdt: Correct return value in fdtdec_decode_display_timing()

Wenyou Yang (1):
      serial: atmel_usart: Add device tree support

 README                                             |    5 +
 arch/arm/cpu/arm1136/start.S                       |    2 +
 arch/arm/cpu/arm920t/start.S                       |    3 +-
 arch/arm/cpu/arm926ejs/start.S                     |    2 +
 arch/arm/cpu/arm946es/start.S                      |    2 +
 arch/arm/cpu/armv7/start.S                         |    5 +-
 arch/arm/cpu/sa1100/start.S                        |    2 +
 arch/arm/dts/Makefile                              |    1 +
 arch/arm/dts/at91sam9g45-gurnard.dts               |  157 ++
 arch/arm/dts/at91sam9g45.dtsi                      | 1335 ++++++++++
 arch/arm/mach-at91/Kconfig                         |    9 +
 arch/arm/mach-at91/Makefile                        |    4 +-
 .../mach-at91/arm926ejs/at91sam9m10g45_devices.c   |   18 +
 arch/arm/mach-at91/include/mach/at91_pmc.h         |   16 +-
 arch/arm/mach-at91/include/mach/at91_rtc.h         |   71 +
 arch/arm/mach-at91/include/mach/at91_sck.h         |   21 +
 arch/arm/mach-at91/include/mach/at91sam9g45.h      |    1 +
 arch/arm/mach-at91/include/mach/sama5_boot.h       |   25 +
 arch/arm/mach-at91/include/mach/sama5d2.h          |   12 -
 arch/arm/mach-at91/spl.c                           |   19 +-
 board/bluewater/gurnard/Kconfig                    |   12 +
 board/bluewater/gurnard/MAINTAINERS                |    6 +
 board/bluewater/gurnard/Makefile                   |   11 +
 board/bluewater/gurnard/gurnard.c                  |  449 ++++
 board/bluewater/gurnard/splash_logo.h              | 2619 ++++++++++++++++++++
 common/bootm.c                                     |    2 +-
 configs/gurnard_defconfig                          |   20 +
 drivers/gpio/at91_gpio.c                           |   11 +-
 drivers/mtd/nand/atmel_nand.c                      |    5 +-
 drivers/net/macb.c                                 |  320 ++-
 drivers/serial/atmel_usart.c                       |   19 +
 drivers/video/atmel_lcdfb.c                        |  197 +-
 include/atmel_lcd.h                                |    9 +
 include/configs/snapper9g45.h                      |  155 ++
 include/dt-bindings/clock/at91.h                   |   23 +
 include/dt-bindings/dma/at91.h                     |   52 +
 include/dt-bindings/pinctrl/at91.h                 |   40 +
 include/linux/compat.h                             |    2 +
 lib/fdtdec.c                                       |    2 +-
 net/bootp.c                                        |    9 +
 40 files changed, 5523 insertions(+), 150 deletions(-)
 create mode 100644 arch/arm/dts/at91sam9g45-gurnard.dts
 create mode 100644 arch/arm/dts/at91sam9g45.dtsi
 create mode 100644 arch/arm/mach-at91/include/mach/at91_rtc.h
 create mode 100644 arch/arm/mach-at91/include/mach/at91_sck.h
 create mode 100644 arch/arm/mach-at91/include/mach/sama5_boot.h
 create mode 100644 board/bluewater/gurnard/Kconfig
 create mode 100644 board/bluewater/gurnard/MAINTAINERS
 create mode 100644 board/bluewater/gurnard/Makefile
 create mode 100644 board/bluewater/gurnard/gurnard.c
 create mode 100644 board/bluewater/gurnard/splash_logo.h
 create mode 100644 configs/gurnard_defconfig
 create mode 100644 include/configs/snapper9g45.h
 create mode 100644 include/dt-bindings/clock/at91.h
 create mode 100644 include/dt-bindings/dma/at91.h
 create mode 100644 include/dt-bindings/pinctrl/at91.h