[U-Boot] [PATCH 00/18] various Gateworks Ventana fixes and enhancements

[Tim Harvey]

On Tue, May 24, 2016 at 11:03 AM, Tim Harvey <tharvey at gateworks.com> wrote:
> This series represents a large chunk of patches in my queue for Gateworks
> Ventana boards based on the IMX6 Soc's.
>
> Tim Harvey (18):
>   imx: ventana: config: add env vars for disk and part
>   imx: ventana: config: add fixfdt script to apply manual fdt fixups
>   imx: ventana: config: use bootdir env var for directory of fdt files
>   imx: ventana: config: use fs env var for block dev filesystem type
>   imx: ventana: config: use explicit addr in loadscript
>   imx: ventana: config: add PREBOOT support
>   imx: ventana: SPL: only disable boot watchdog if Falcon mode
>   imx: ventana: SPL: added support for 32bit IMX6DQ 8Gb density DRAM
>     config
>   imx: ventana: gsc: add gsc sleep command
>   imx: ventana: gsc: fix negative temperature readings
>   imx: ventana: gsc: show board temp on boot
>   imx: ventana: export backlight gpio after gpio driver is available
>   imx: ventana: fix invalid dio configuration for pwm mode
>   imx: ventana: enable pwm device-tree property based on hwconfig
>   imx: ventana: remove dependence on EECONFIG_SATA eeprom feature bit
>   imx: ventana: remove several EEPROM config bit dependence
>   imx: ventana: add GW553x support
>   imx: ventana: add fdt fixup to enable UHS-I support on selected boards
>
>  board/gateworks/gw_ventana/common.c         | 100 ++++++++++++++++++++++++----
>  board/gateworks/gw_ventana/common.h         |   3 +
>  board/gateworks/gw_ventana/eeprom.c         |  34 +---------
>  board/gateworks/gw_ventana/gsc.c            |  57 +++++++++++++++-
>  board/gateworks/gw_ventana/gw_ventana.c     |  69 +++++++++++++++++--
>  board/gateworks/gw_ventana/gw_ventana_spl.c |  38 ++++++++++-
>  board/gateworks/gw_ventana/ventana_eeprom.h |   1 +
>  include/configs/gw_ventana.h                |  37 ++++++----
>  8 files changed, 272 insertions(+), 67 deletions(-)
>
> --
> 1.9.1
>

Stefano,

Any comment on these? I've got a few more after this.

Regards,

Tim