[U-Boot] [PATCH] mtd: nand: Patch remaining places where nand_to_mtd() should be used
Boris Brezillon
boris.brezillon at free-electrons.com
Wed Jun 15 20:56:10 CEST 2016
Some drivers are still directly accessing the chip->mtd field. Patch
them to use nand_to_mtd() instead.
Signed-off-by: Boris Brezillon <boris.brezillon at free-electrons.com>
---
doc/README.nand | 2 +-
drivers/mtd/nand/am335x_spl_bch.c | 2 +-
drivers/mtd/nand/atmel_nand.c | 2 +-
drivers/mtd/nand/lpc32xx_nand_mlc.c | 2 +-
drivers/mtd/nand/mxs_nand_spl.c | 2 +-
drivers/mtd/nand/nand_spl_simple.c | 2 +-
6 files changed, 6 insertions(+), 6 deletions(-)
diff --git a/doc/README.nand b/doc/README.nand
index 96ffc48..ff6fa9b 100644
--- a/doc/README.nand
+++ b/doc/README.nand
@@ -137,7 +137,7 @@ Configuration Options:
init:
/* chip is struct nand_chip, and is now provided by the driver. */
- mtd = &chip.mtd;
+ mtd = nand_to_mtd(&chip);
/*
* Fill in appropriate values if this driver uses these fields,
diff --git a/drivers/mtd/nand/am335x_spl_bch.c b/drivers/mtd/nand/am335x_spl_bch.c
index f8770e0..a8a7a66 100644
--- a/drivers/mtd/nand/am335x_spl_bch.c
+++ b/drivers/mtd/nand/am335x_spl_bch.c
@@ -223,7 +223,7 @@ void nand_init(void)
/*
* Init board specific nand support
*/
- mtd = &nand_chip.mtd;
+ mtd = nand_to_mtd(&nand_chip);
nand_chip.IO_ADDR_R = nand_chip.IO_ADDR_W =
(void __iomem *)CONFIG_SYS_NAND_BASE;
board_nand_init(&nand_chip);
diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c
index 75e8307..a66cfc1 100644
--- a/drivers/mtd/nand/atmel_nand.c
+++ b/drivers/mtd/nand/atmel_nand.c
@@ -1448,7 +1448,7 @@ int board_nand_init(struct nand_chip *nand)
void nand_init(void)
{
- mtd = &nand_chip.mtd;
+ mtd = nand_to_mtd(&nand_chip);
mtd->writesize = CONFIG_SYS_NAND_PAGE_SIZE;
mtd->oobsize = CONFIG_SYS_NAND_OOBSIZE;
nand_chip.IO_ADDR_R = (void __iomem *)CONFIG_SYS_NAND_BASE;
diff --git a/drivers/mtd/nand/lpc32xx_nand_mlc.c b/drivers/mtd/nand/lpc32xx_nand_mlc.c
index 4262029..a793115 100644
--- a/drivers/mtd/nand/lpc32xx_nand_mlc.c
+++ b/drivers/mtd/nand/lpc32xx_nand_mlc.c
@@ -541,7 +541,7 @@ static struct nand_chip lpc32xx_chip;
void board_nand_init(void)
{
- struct mtd_info *mtd = &lpc32xx_chip.mtd;
+ struct mtd_info *mtd = nand_to_mtd(&lpc32xx_chip);
int ret;
/* Set all BOARDSPECIFIC (actually core-specific) fields */
diff --git a/drivers/mtd/nand/mxs_nand_spl.c b/drivers/mtd/nand/mxs_nand_spl.c
index a8a3084..ff28df4 100644
--- a/drivers/mtd/nand/mxs_nand_spl.c
+++ b/drivers/mtd/nand/mxs_nand_spl.c
@@ -147,7 +147,7 @@ static int mxs_nand_init(void)
/* init mxs nand driver */
board_nand_init(&nand_chip);
- mtd = &nand_chip.mtd;
+ mtd = nand_to_mtd(&nand_chip);
/* set mtd functions */
nand_chip.cmdfunc = mxs_nand_command;
nand_chip.numchips = 1;
diff --git a/drivers/mtd/nand/nand_spl_simple.c b/drivers/mtd/nand/nand_spl_simple.c
index b023e00..60a7607 100644
--- a/drivers/mtd/nand/nand_spl_simple.c
+++ b/drivers/mtd/nand/nand_spl_simple.c
@@ -249,7 +249,7 @@ void nand_init(void)
/*
* Init board specific nand support
*/
- mtd = &nand_chip.mtd;
+ mtd = nand_to_mtd(&nand_chip);
nand_chip.IO_ADDR_R = nand_chip.IO_ADDR_W =
(void __iomem *)CONFIG_SYS_NAND_BASE;
board_nand_init(&nand_chip);
--
2.7.4
More information about the U-Boot
mailing list