[U-Boot] u-boot-x86 sf probe fail

[Hilbert Tu(杜睿哲_Pegatron)]

Hi Bin,

Thanks for your information.

The SPI address I mentioned was dumped from pch_get_spi_base(). But I have no idea where to check my memory mapping.
It is possible that coreboot remaps the address due to my wrong init cofig.
Attached is my boot-up log for your reference.

Regards,
Hilbert

-----Original Message-----
From: Bin Meng [mailto:bmeng.cn at gmail.com]
Sent: Wednesday, June 15, 2016 4:09 PM
To: Hilbert Tu(杜睿哲_Pegatron)
Cc: u-boot at lists.denx.de
Subject: Re: [U-Boot] u-boot-x86 sf probe fail

Hi Hilbert,

On Wed, Jun 15, 2016 at 2:30 PM, Hilbert Tu(杜睿哲_Pegatron)
<Hilbert_Tu at pegatroncorp.com> wrote:
> Hi Simon,
>
> I have checked the SPI base address in coreboot and u-boot. They are different. I am not sure is it due to the memory remapping.
> In coreboot, the SPI address is 0xfed0100
> In u-boot, the SPI address is 0x7fc36e00
> Do you have any comments? Thanks.

As Simon mentioned, please check pch_get_spi_base(). It's very likely
your Atom SoC maps the SPI base register to some different address
where current U-Boot does not know.

Regards,
Bin
This e-mail and its attachment may contain PEGATRON Corp information that is confidential or privileged, and are solely for the use of the individual to whom this e-mail is addressed. If you are not the intended recipient or have received it accidentally, please immediately notify the sender by reply e-mail and destroy all copies of this email and its attachment. Please be advised that any unauthorized use, disclosure, distribution or copying of this email or its attachment is strictly prohibited.
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: log_20160615.txt
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20160615/5757d7fb/attachment-0001.txt>