[U-Boot] [PATCH V2 2/2] common: add new boot media kconfig entry

[Masahiro Yamada]

2016-06-17 18:39 GMT+09:00 Peng Fan <van.freenix at gmail.com>:
> Add CONFIG_{SD|NAND|ONENAND|SPI|QSPI|SATA}_BOOT kconfig entries.
>
> SoCs supports loading U-Boot from different medias to DRAM, such as
> i.MX6/7 supports loading U-Boot to DRAM from sd/emmc/nand/qspi/spi/sata
> and etc. For i.MX, imximage will generate different IVT headers according
> to boot medias.
>
> Signed-off-by: Peng Fan <peng.fan at nxp.com>
> Cc: Simon Glass <sjg at chromium.org>
> Cc: Heiko Schocher <hs at denx.de>
> Cc: Joe Hershberger <joe.hershberger at ni.com>
> Cc: Bin Meng <bmeng.cn at gmail.com>
> Cc: Christophe Ricard <christophe-h.ricard at st.com>
> Cc: Nikita Kiryanov <nikita at compulab.co.il>
> Cc: Francois Retief <fgretief at spaceteq.co.za>
> Cc: Tom Rini <trini at konsulko.com>
> ---
>
> V2:
>  Move NOR_BOOT to the patch 1/2.
>  The idea of this patch is for adding different boot media support for
>  i.MXes. And I'll post out following patches if this patch is accepted.
>  I ran moveconfig.py, but I did not include the results into a patch.
>  This patch does not break the boards which defined NAND_BOOT/SD_BOOT and
>  etc, and I prefer to let board owners to move to defconfig later.
>
>  common/Kconfig | 48 ++++++++++++++++++++++++++++++++++++++++++++++++
>  1 file changed, 48 insertions(+)
>
> diff --git a/common/Kconfig b/common/Kconfig
> index 04d092c..f0f6ee1 100644
> --- a/common/Kconfig
> +++ b/common/Kconfig
> @@ -108,6 +108,54 @@ config NOR_BOOT
>           as the ROM only partially sets up pinmux.  We also default to using
>           NOR for environment.
>
> +config NAND_BOOT
> +       bool "Support for booting from NAND flash"
> +       default n
> +       help
> +         Enabling this will make a U-Boot binary that is capable of being
> +         booted via NAND flash. This is not a must, some SoCs need this,
> +         somes not.
> +
> +config ONENAND_BOOT
> +       bool "Support for booting from ONENAND"
> +       default n
> +       help
> +         Enabling this will make a U-Boot binary that is capable of being
> +         booted via ONENAND. This is not a must, some SoCs need this,
> +         somes not.
> +
> +config QSPI_BOOT
> +       bool "Support for booting from QSPI flash"
> +       default n
> +       help
> +         Enabling this will make a U-Boot binary that is capable of being
> +         booted via QSPI flash. This is not a must, some SoCs need this,
> +         somes not.
> +
> +config SATA_BOOT
> +       bool "Support for booting from SATA"
> +       default n
> +       help
> +         Enabling this will make a U-Boot binary that is capable of being
> +         booted via SATA. This is not a must, some SoCs need this,
> +         somes not.
> +
> +config SD_BOOT
> +       bool "Support for booting from SD/EMMC"
> +       default n
> +       help
> +         Enabling this will make a U-Boot binary that is capable of being
> +         booted via SD/EMMC. This is not a must, some SoCs need this,
> +         somes not.
> +
> +config SPI_BOOT
> +       bool "Support for booting from SPI flash"
> +       default n
> +       help
> +         Enabling this will make a U-Boot binary that is capable of being
> +         booted via SPI flash. This is not a must, some SoCs need this,
> +         somes not.
> +
>  endmenu


Do you intend to replace
CONFIG_SPL_NOR_SUPPORT
CONFIG_SPL_NAND_SUPPORT
CONFIG_SPL_USB_SUPPORT
CONFIG_SPL_MMC_SUPPORT
etc. with these options?


Currently, common/spl/spl.c uses CONFIG_SPL_*_SUPPORT
to enable/disable capable boot devices.





-- 
Best Regards
Masahiro Yamada