[U-Boot] [PATCH] wandboard: enable SATA with imx6q

[Stefano Babic]

Hi Gilles,

On 09/06/2016 10:33, Gilles Chanteperdrix wrote:
> Signed-off-by: Gilles Chanteperdrix <gilles.chanteperdrix at xenomai.org>
> ---
>  board/wandboard/wandboard.c |  6 ++++++
>  include/configs/wandboard.h | 12 ++++++++++++
>  2 files changed, 18 insertions(+)
> 
> diff --git a/board/wandboard/wandboard.c b/board/wandboard/wandboard.c
> index 4ce74cd..8340dd1 100644
> --- a/board/wandboard/wandboard.c
> +++ b/board/wandboard/wandboard.c
> @@ -345,6 +345,12 @@ int board_early_init_f(void)
>  #if defined(CONFIG_VIDEO_IPUV3)
>  	setup_display();
>  #endif
> +#ifdef CONFIG_CMD_SATA
> +	/* Only mx6q wandboard has SATA */
> +	if (is_cpu_type(MXC_CPU_MX6Q))
> +		setup_sata();
> +#endif
> +
>  	return 0;
>  }
>  
> diff --git a/include/configs/wandboard.h b/include/configs/wandboard.h
> index 99f5c0c..92af6543 100644
> --- a/include/configs/wandboard.h
> +++ b/include/configs/wandboard.h
> @@ -28,6 +28,18 @@
>  #define CONFIG_MXC_UART
>  #define CONFIG_MXC_UART_BASE		UART1_BASE
>  
> +/* SATA Configs */
> +
> +#define CONFIG_CMD_SATA
> +#ifdef CONFIG_CMD_SATA
> +#define CONFIG_DWC_AHSATA
> +#define CONFIG_SYS_SATA_MAX_DEVICE	1
> +#define CONFIG_DWC_AHSATA_PORT_ID	0
> +#define CONFIG_DWC_AHSATA_BASE_ADDR	SATA_ARB_BASE_ADDR
> +#define CONFIG_LBA48
> +#define CONFIG_LIBATA
> +#endif
> +
>  /* Command definition */
>  #define CONFIG_CMD_BMODE
>  

Fine with me - I applied to -next branch.

Added Fabio in CC as board maintainer - I van still change before this
flows into master branch.


Best regards,
Stefano Babic


-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================