[U-Boot] [PATCH] igep00x0: runtime flash detection
Ladislav Michl
ladis at linux-mips.org
Sat Jun 18 13:13:24 CEST 2016
Signed-off-by: Ladislav Michl <ladis at linux-mips.org>
---
board/isee/igep00x0/igep00x0.c | 71 +++++++++++++++++++++++++++++++-----------
1 file changed, 53 insertions(+), 18 deletions(-)
diff --git a/board/isee/igep00x0/igep00x0.c b/board/isee/igep00x0/igep00x0.c
index 5dfb7d2..b36709c 100644
--- a/board/isee/igep00x0/igep00x0.c
+++ b/board/isee/igep00x0/igep00x0.c
@@ -17,6 +17,10 @@
#include <asm/arch/mux.h>
#include <asm/arch/sys_proto.h>
#include <asm/mach-types.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/onenand.h>
+#include <jffs2/load_kernel.h>
#include "igep00x0.h"
DECLARE_GLOBAL_DATA_PTR;
@@ -56,7 +60,25 @@ U_BOOT_DEVICE(igep_uart) = {
*/
int board_init(void)
{
- gpmc_init(); /* in SRAM or SDRAM, finish GPMC */
+ int loops = 100;
+
+ /* find out flash memory type, assume NAND first */
+ gpmc_cs0_flash = MTD_DEV_TYPE_NAND;
+ gpmc_init();
+
+ /* Issue a RESET and then READID */
+ writeb(NAND_CMD_RESET, &gpmc_cfg->cs[0].nand_cmd);
+ writeb(NAND_CMD_STATUS, &gpmc_cfg->cs[0].nand_cmd);
+ while ((readl(&gpmc_cfg->cs[0].nand_dat) & NAND_STATUS_READY)
+ != NAND_STATUS_READY) {
+ udelay(1);
+ if (--loops == 0) {
+ gpmc_cs0_flash = MTD_DEV_TYPE_ONENAND;
+ gpmc_init(); /* reinitialize for OneNAND */
+ break;
+ }
+ }
+
/* boot param addr */
gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100);
@@ -75,29 +97,42 @@ int board_init(void)
*/
void get_board_mem_timings(struct board_sdrc_timings *timings)
{
- timings->mr = MICRON_V_MR_165;
-#ifdef CONFIG_BOOT_NAND
- timings->mcfg = MICRON_V_MCFG_200(256 << 20);
- timings->ctrla = MICRON_V_ACTIMA_200;
- timings->ctrlb = MICRON_V_ACTIMB_200;
- timings->rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_200MHz;
-#else
- if (get_cpu_family() == CPU_OMAP34XX) {
- timings->mcfg = NUMONYX_V_MCFG_165(256 << 20);
- timings->ctrla = NUMONYX_V_ACTIMA_165;
- timings->ctrlb = NUMONYX_V_ACTIMB_165;
- timings->rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_165MHz;
+ int mfr, id, err = identify_nand_chip(&mfr, &id);
- } else {
- timings->mcfg = NUMONYX_V_MCFG_200(256 << 20);
- timings->ctrla = NUMONYX_V_ACTIMA_200;
- timings->ctrlb = NUMONYX_V_ACTIMB_200;
+ timings->mr = MICRON_V_MR_165;
+ if (!err && mfr == NAND_MFR_MICRON) {
+ timings->mcfg = MICRON_V_MCFG_200(256 << 20);
+ timings->ctrla = MICRON_V_ACTIMA_200;
+ timings->ctrlb = MICRON_V_ACTIMB_200;
timings->rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_200MHz;
+ gpmc_cs0_flash = MTD_DEV_TYPE_NAND;
+ } else {
+ if (get_cpu_family() == CPU_OMAP34XX) {
+ timings->mcfg = NUMONYX_V_MCFG_165(256 << 20);
+ timings->ctrla = NUMONYX_V_ACTIMA_165;
+ timings->ctrlb = NUMONYX_V_ACTIMB_165;
+ timings->rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_165MHz;
+ } else {
+ timings->mcfg = NUMONYX_V_MCFG_200(256 << 20);
+ timings->ctrla = NUMONYX_V_ACTIMA_200;
+ timings->ctrlb = NUMONYX_V_ACTIMB_200;
+ timings->rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_200MHz;
+ }
+ gpmc_cs0_flash = MTD_DEV_TYPE_ONENAND;
}
-#endif
}
#endif
+int onenand_board_init(struct mtd_info *mtd)
+{
+ if (gpmc_cs0_flash == MTD_DEV_TYPE_ONENAND) {
+ struct onenand_chip *this = mtd->priv;
+ this->base = (void *)CONFIG_SYS_ONENAND_BASE;
+ return 0;
+ }
+ return 1;
+}
+
#if defined(CONFIG_CMD_NET)
static void reset_net_chip(int gpio)
{
--
2.1.4
More information about the U-Boot
mailing list