[U-Boot] [PATCH 5/9] arm: omap-common: secure ROM signature verify API

Andreas Dannenberg dannenberg at ti.com
Tue Jun 21 05:34:08 CEST 2016


Adds an API that verifies a signature attached to an image (binary
blob). This API is basically a entry to a secure ROM service provided by
the device and accessed via an SMC call, using a particular calling
convention.

Signed-off-by: Daniel Allred <d-allred at ti.com>
Signed-off-by: Andreas Dannenberg <dannenberg at ti.com>
---
 arch/arm/cpu/armv7/omap-common/sec-common.c | 76 +++++++++++++++++++++++++++++
 arch/arm/include/asm/omap_common.h          |  9 ++++
 2 files changed, 85 insertions(+)

diff --git a/arch/arm/cpu/armv7/omap-common/sec-common.c b/arch/arm/cpu/armv7/omap-common/sec-common.c
index b9c0a42..dbb9078 100644
--- a/arch/arm/cpu/armv7/omap-common/sec-common.c
+++ b/arch/arm/cpu/armv7/omap-common/sec-common.c
@@ -16,6 +16,9 @@
 #include <asm/arch/sys_proto.h>
 #include <asm/omap_common.h>
 
+/* Index for signature verify ROM API */
+#define API_HAL_KM_VERIFYCERTIFICATESIGNATURE_INDEX	(0x0000000E)
+
 static uint32_t secure_rom_call_args[5] __aligned(ARCH_DMA_MINALIGN);
 
 u32 secure_rom_call(u32 service, u32 proc_id, u32 flag, ...)
@@ -47,3 +50,76 @@ u32 secure_rom_call(u32 service, u32 proc_id, u32 flag, ...)
 
 	return omap_smc_sec(service, proc_id, flag, secure_rom_call_args);
 }
+
+static u32 find_sig_start(char *image, size_t size)
+{
+	char *image_end = image + size;
+	char *sig_start_magic = "CERT_";
+	int magic_str_len = strlen(sig_start_magic);
+	char *ch;
+
+	while (--image_end > image) {
+		if (*image_end == '_') {
+			ch = image_end - magic_str_len + 1;
+			if (!strncmp(ch, sig_start_magic, magic_str_len))
+				return (u32)ch;
+		}
+	}
+	return 0;
+}
+
+int secure_boot_verify_image(void **image, size_t *size)
+{
+	int result = 1;
+	u32 cert_addr, sig_addr;
+	size_t cert_size;
+
+	/* Perform cache writeback on input buffer */
+	flush_dcache_range(
+		(u32)*image,
+		(u32)*image + roundup(*size, ARCH_DMA_MINALIGN));
+
+	cert_addr = (uint32_t)*image;
+	sig_addr = find_sig_start((char *)*image, *size);
+
+	if (sig_addr == 0) {
+		printf("No signature found in image.\n");
+		result = 1;
+		goto auth_exit;
+	}
+
+	*size = sig_addr - cert_addr;	/* Subtract out the signature size */
+	cert_size = *size;
+
+	/* Check if image load address is 32-bit aligned */
+	if (0 != (0x3 & cert_addr)) {
+		printf("Image is not 4-byte aligned.\n");
+		result = 1;
+		goto auth_exit;
+	}
+
+	/* Image size also should be multiple of 4 */
+	if (0 != (0x3 & cert_size)) {
+		printf("Image size is not 4-byte aligned.\n");
+		result = 1;
+		goto auth_exit;
+	}
+
+	/* Call ROM HAL API to verify certificate signature */
+	debug("%s: load_addr = %x, size = %x, sig_addr = %x\n", __func__,
+	      cert_addr, cert_size, sig_addr);
+
+	result = secure_rom_call(
+		API_HAL_KM_VERIFYCERTIFICATESIGNATURE_INDEX, 0, 0,
+		4, cert_addr, cert_size, sig_addr, 0xFFFFFFFF);
+auth_exit:
+	if (result != 0) {
+		printf("Authentication failed!\n");
+		printf("Return Value = %08X\n", result);
+		hang();
+	}
+
+	printf("Authentication passed: %s\n", (char *)sig_addr);
+
+	return result;
+}
diff --git a/arch/arm/include/asm/omap_common.h b/arch/arm/include/asm/omap_common.h
index 293fc72..8887335 100644
--- a/arch/arm/include/asm/omap_common.h
+++ b/arch/arm/include/asm/omap_common.h
@@ -640,6 +640,15 @@ u32 omap_smc_sec(u32 service, u32 proc_id, u32 flag, u32 *params);
  */
 u32 secure_rom_call(u32 service, u32 proc_id, u32 flag, ...);
 
+/*
+ * Invoke a secure ROM API on high-secure (HS) device variants that can be used
+ * to verify a secure blob by authenticating and optionally decrypting it. The
+ * exact operation performed depends on how the certificate that was embedded
+ * into the blob during the signing/encryption step when the secure blob was
+ * first created.
+ */
+int secure_boot_verify_image(void **p_image, size_t *p_size);
+
 void enable_edma3_clocks(void);
 void disable_edma3_clocks(void);
 
-- 
2.6.4



More information about the U-Boot mailing list