[U-Boot] [PATCH] mpc85xx/powerpc:cpu_init: Modified the errata according to endianness

[Marek Vasut]

On 06/21/2016 09:22 AM, Sriram Dash wrote:
> Modifies errata implementation due to the fact that P3041,
> P5020, and P5040 are all big endian for the USB PHY registers, but
> they were specified little endian. Also

Please split this into two patches.

, Adds errata for P1010 and
> P2041 2.0.
> 
> Signed-off-by: Sriram Dash <sriram.dash at nxp.com>
> Signed-off-by: Rajesh Bhagat <rajesh.bhagat at nxp.com>
> ---
>  arch/powerpc/cpu/mpc85xx/cpu_init.c       | 4 ++--
>  arch/powerpc/include/asm/config_mpc85xx.h | 1 +
>  arch/powerpc/include/asm/immap_85xx.h     | 2 ++
>  drivers/usb/common/fsl-errata.c           | 6 ++++--
>  4 files changed, 9 insertions(+), 4 deletions(-)
> 
> diff --git a/arch/powerpc/cpu/mpc85xx/cpu_init.c b/arch/powerpc/cpu/mpc85xx/cpu_init.c
> index 61f5639..61dedfc 100644
> --- a/arch/powerpc/cpu/mpc85xx/cpu_init.c
> +++ b/arch/powerpc/cpu/mpc85xx/cpu_init.c
> @@ -114,10 +114,10 @@ void fsl_erratum_a006261_workaround(struct ccsr_usb_phy __iomem *usb_phy)
>  	setbits_be32(&usb_phy->config2,
>  		     CONFIG_SYS_FSL_USB_RX_AUTO_CAL_RD_WR_SEL);
>  
> -	temp = squelch_prog_rd_0_2 << CONFIG_SYS_FSL_USB_SQUELCH_PROG_WR_0;
> +	temp = squelch_prog_rd_0_2 << CONFIG_SYS_FSL_USB_SQUELCH_PROG_WR_3;
>  	out_be32(&usb_phy->config2, in_be32(&usb_phy->config2) | temp);
>  
> -	temp = squelch_prog_rd_3_5 << CONFIG_SYS_FSL_USB_SQUELCH_PROG_WR_3;
> +	temp = squelch_prog_rd_3_5 << CONFIG_SYS_FSL_USB_SQUELCH_PROG_WR_0;
>  	out_be32(&usb_phy->config2, in_be32(&usb_phy->config2) | temp);
>  #endif
>  }
> diff --git a/arch/powerpc/include/asm/config_mpc85xx.h b/arch/powerpc/include/asm/config_mpc85xx.h
> index 505d355..9b7feda 100644
> --- a/arch/powerpc/include/asm/config_mpc85xx.h
> +++ b/arch/powerpc/include/asm/config_mpc85xx.h
> @@ -162,6 +162,7 @@
>  #define CONFIG_SYS_FSL_ERRATUM_I2C_A004447
>  #define CONFIG_SYS_FSL_ERRATUM_A004508
>  #define CONFIG_SYS_FSL_ERRATUM_A007075
> +#define CONFIG_SYS_FSL_USB1_PHY_ENABLE
>  #define CONFIG_SYS_FSL_ERRATUM_A006261
>  #define CONFIG_SYS_FSL_ERRATUM_A004477
>  #define CONFIG_SYS_FSL_A004447_SVR_REV	0x10
> diff --git a/arch/powerpc/include/asm/immap_85xx.h b/arch/powerpc/include/asm/immap_85xx.h
> index c045a24..07ad22d 100644
> --- a/arch/powerpc/include/asm/immap_85xx.h
> +++ b/arch/powerpc/include/asm/immap_85xx.h
> @@ -2953,6 +2953,8 @@ struct ccsr_pman {
>  #define CONFIG_SYS_MPC85xx_DMA_OFFSET		0x21000
>  #define CONFIG_SYS_MPC85xx_USB1_OFFSET		0x22000
>  #define CONFIG_SYS_MPC85xx_USB2_OFFSET		0x23000
> +#define CONFIG_SYS_MPC85xx_USB1_PHY_OFFSET	0xE5000
> +#define CONFIG_SYS_MPC85xx_USB2_PHY_OFFSET	0xE5100
>  #ifdef CONFIG_TSECV2
>  #define CONFIG_SYS_TSEC1_OFFSET			0xB0000
>  #elif defined(CONFIG_TSECV2_1)
> diff --git a/drivers/usb/common/fsl-errata.c b/drivers/usb/common/fsl-errata.c
> index ebe60a8..a69b977 100644
> --- a/drivers/usb/common/fsl-errata.c
> +++ b/drivers/usb/common/fsl-errata.c
> @@ -53,7 +53,8 @@ bool has_erratum_a006261(void)
>  	case SVR_P2041:
>  	case SVR_P2040:
>  		return IS_SVR_REV(svr, 1, 0) ||
> -			IS_SVR_REV(svr, 1, 1) || IS_SVR_REV(svr, 2, 1);
> +			IS_SVR_REV(svr, 1, 1) ||
> +			IS_SVR_REV(svr, 2, 0) || IS_SVR_REV(svr, 2, 1);
>  	case SVR_P3041:
>  		return IS_SVR_REV(svr, 1, 0) ||
>  			IS_SVR_REV(svr, 1, 1) ||
> @@ -72,7 +73,8 @@ bool has_erratum_a006261(void)
>  	case SVR_T2081:
>  		return IS_SVR_REV(svr, 1, 0);
>  	case SVR_P5040:
> -		return IS_SVR_REV(svr, 1, 0);
> +		return IS_SVR_REV(svr, 1, 0) ||
> +		       IS_SVR_REV(svr, 2, 0) || IS_SVR_REV(svr, 2, 1);
>  #endif
>  	}
>  
> 


-- 
Best regards,
Marek Vasut