[U-Boot] [PATCH 1/2] dm: mmc: dwmmc: fix the wrong explanation for clock values

[Jaehoon Chung]

This e,g is wrong. Maximum/minimum e.g values are swapped each other.

Signed-off-by: Jaehoon Chung <jh80.chung at samsung.com>
---
 include/dwmmc.h | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/include/dwmmc.h b/include/dwmmc.h
index 6aebe96..164d1dc 100644
--- a/include/dwmmc.h
+++ b/include/dwmmc.h
@@ -256,8 +256,8 @@ static inline u8 dwmci_readb(struct dwmci_host *host, int reg)
  * @name:	Device name (normally dev->name)
  * @buswidth:	Bus width (in bits, such as 4 or 8)
  * @caps:	Host capabilities (MMC_MODE_...)
- * @max_clk:	Maximum supported clock speed in HZ (e.g. 400000)
- * @min_clk:	Minimum supported clock speed in HZ (e.g. 150000000)
+ * @max_clk:	Maximum supported clock speed in HZ (e.g. 150000000)
+ * @min_clk:	Minimum supported clock speed in HZ (e.g. 400000)
  */
 void dwmci_setup_cfg(struct mmc_config *cfg, const char *name, int buswidth,
 		     uint caps, u32 max_clk, u32 min_clk);
@@ -286,8 +286,8 @@ int dwmci_bind(struct udevice *dev, struct mmc *mmc, struct mmc_config *cfg);
  * This is used when you are not using CONFIG_BLK. Convert your driver over!
  *
  * @host:	DWMMC host structure
- * @max_clk:	Maximum supported clock speed in HZ (e.g. 400000)
- * @min_clk:	Minimum supported clock speed in HZ (e.g. 150000000)
+ * @max_clk:	Maximum supported clock speed in HZ (e.g. 150000000)
+ * @min_clk:	Minimum supported clock speed in HZ (e.g. 400000)
  * @return 0 if OK, -ve on error
  */
 int add_dwmci(struct dwmci_host *host, u32 max_clk, u32 min_clk);
-- 
1.9.1