[U-Boot] [PATCH 1/9] spi: zynq_qspi: Add quad support for zynq qspi

Jagan Teki jagannadh.teki at gmail.com
Tue Jun 28 20:33:14 CEST 2016


On 21 June 2016 at 17:24, Siva Durga Prasad Paladugu
<siva.durga.paladugu at xilinx.com> wrote:
> Hi Tom,
>
>> -----Original Message-----
>> From: Siva Durga Prasad Paladugu
>> Sent: Tuesday, June 14, 2016 2:49 PM
>> To: u-boot at lists.denx.de; jagannadh.teki at gmail.com
>> Cc: Michal Simek <michals at xilinx.com>; 'Siva Durga Prasad Paladugu'
>> <siva.durga.paladugu at xilinx.com>
>> Subject: RE: [PATCH 1/9] spi: zynq_qspi: Add quad support for zynq qspi
>>
>>
>> -----Original Message-----
>> From: Siva Durga Prasad Paladugu [mailto:siva.durga.paladugu at xilinx.com]
>> Sent: Monday, June 06, 2016 3:15 PM
>> To: u-boot at lists.denx.de
>> Cc: Michal Simek <michals at xilinx.com>; jagannadh.teki at gmail.com; Siva Durga
>> Prasad Paladugu <sivadur at xilinx.com>
>> Subject: [PATCH 1/9] spi: zynq_qspi: Add quad support for zynq qspi
>>
>> Add quad commands supports for zynq qspi driver
>>
>> Hi Jagan,
>>
>> Any comments on this series. If not, Please take this series.

Please wait I will back with my comments.

>
> Same is the case with this series too, If Jagan is busy, Is it possible to get it Acked/Reviewed by some other person
> and can go through your tree/Michal tree.
>
> Regards,
> Siva
>
>>
>> Signed-off-by: Siva Durga Prasad Paladugu <sivadur at xilinx.com>
>> ---
>> - Tested on zc702 board
>> ---
>>  drivers/spi/zynq_qspi.c |   14 ++++++++++++++
>>  1 files changed, 14 insertions(+), 0 deletions(-)
>>
>> diff --git a/drivers/spi/zynq_qspi.c b/drivers/spi/zynq_qspi.c index
>> b98663c..e636244 100644
>> --- a/drivers/spi/zynq_qspi.c
>> +++ b/drivers/spi/zynq_qspi.c
>> @@ -11,7 +11,9 @@
>>  #include <dm.h>
>>  #include <malloc.h>
>>  #include <spi.h>
>> +#include <spi_flash.h>
>>  #include <asm/io.h>
>> +#include "../mtd/spi/sf_internal.h"
>>
>>  DECLARE_GLOBAL_DATA_PTR;
>>
>> @@ -156,6 +158,17 @@ static void zynq_qspi_init_hw(struct zynq_qspi_priv
>> *priv)
>>       writel(ZYNQ_QSPI_ENR_SPI_EN_MASK, &regs->enr);  }
>>
>> +static int zynq_qspi_child_pre_probe(struct udevice *bus) {
>> +     struct spi_slave *slave = dev_get_parent_priv(bus);
>> +
>> +     slave->mode_rx = QUAD_OUTPUT_FAST;
>> +     slave->mode = SPI_TX_QUAD;
>> +     slave->no_all_quad = 1;
>> +
>> +     return 0;
>> +}
>> +
>>  static int zynq_qspi_probe(struct udevice *bus)  {
>>       struct zynq_qspi_platdata *plat = dev_get_platdata(bus); @@ -627,4
>> +640,5 @@ U_BOOT_DRIVER(zynq_qspi) = {
>>       .platdata_auto_alloc_size = sizeof(struct zynq_qspi_platdata),
>>       .priv_auto_alloc_size = sizeof(struct zynq_qspi_priv),
>>       .probe  = zynq_qspi_probe,
>> +     .child_pre_probe = zynq_qspi_child_pre_probe,
>>  };
>> --
>> 1.7.1
>
>
>
> This email and any attachments are intended for the sole use of the named recipient(s) and contain(s) confidential information that may be proprietary, privileged or copyrighted under applicable law. If you are not the intended recipient, do not read, copy, or forward this email message or any attachments. Delete this email message and any attachments immediately.
>



-- 
Jagan.


More information about the U-Boot mailing list