[U-Boot] [PATCH] sf: set the Uniform Sector to CR3NV instead of CR3V

[Gong Qianyu]

From: Mingkai Hu <mingkai.hu at nxp.com>

Set the flash to Uniform Sector Architecture in the non-volatile
register. After the power cycle, it's also Uniform Sector Architecture.

Signed-off-by: Mingkai Hu <mingkai.hu at nxp.com>
Signed-off-by: Gong Qianyu <Qianyu.Gong at nxp.com>

diff --git a/drivers/mtd/spi/spi_flash.c b/drivers/mtd/spi/spi_flash.c
index 64d4e0f..366c362 100644
--- a/drivers/mtd/spi/spi_flash.c
+++ b/drivers/mtd/spi/spi_flash.c
@@ -975,7 +975,7 @@ int spi_flash_decode_fdt(const void *blob, struct spi_flash *flash)
 static int spansion_s25fss_disable_4KB_erase(struct spi_slave *spi)
 {
 	u8 cmd[4];
-	u32 offset = 0x800004; /* CR3V register offset */
+	u32 offset = 0x4; /* CR3NV register offset */
 	u8 cr3v;
 	int ret;
 
-- 
2.1.0.27.g96db324