[U-Boot] [PATCH] Fix spelling of "occurred".

Vagrant Cascadian vagrant at debian.org
Sun May 1 04:18:00 CEST 2016


Signed-off-by: Vagrant Cascadian <vagrant at debian.org>
---

 board/bf533-ezkit/flash.c                  |  2 +-
 board/mpl/pip405/pip405.c                  |  2 +-
 board/tqc/tqm5200/cmd_stk52xx.c            |  2 +-
 cmd/fdc.c                                  |  8 ++++----
 common/kgdb.c                              |  2 +-
 common/usb_hub.c                           |  2 +-
 drivers/ddr/marvell/a38x/ddr3_init.h       |  2 +-
 drivers/ddr/marvell/axp/ddr3_hw_training.h |  2 +-
 drivers/i2c/kona_i2c.c                     |  2 +-
 drivers/mtd/nand/omap_gpmc.c               |  4 ++--
 drivers/net/4xx_enet.c                     |  4 ++--
 drivers/net/enc28j60.c                     |  2 +-
 drivers/net/ne2000_base.c                  |  4 ++--
 drivers/usb/gadget/mpc8xx_udc.c            |  2 +-
 drivers/usb/musb/musb_hcd.c                |  6 +++---
 include/linux/fb.h                         |  4 ++--
 include/test/ut.h                          | 12 ++++++------
 include/usbdevice.h                        |  2 +-
 18 files changed, 32 insertions(+), 32 deletions(-)

diff --git a/board/bf533-ezkit/flash.c b/board/bf533-ezkit/flash.c
index 3180a76..a7b3519 100644
--- a/board/bf533-ezkit/flash.c
+++ b/board/bf533-ezkit/flash.c
@@ -320,7 +320,7 @@ int poll_toggle_bit(long lOffset)
 		}
 		timeout--;
 	}
-	printf("Time out occured \n");
+	printf("Time out occurred \n");
 	if (timeout < 0)
 		return FLASH_FAIL;
 }
diff --git a/board/mpl/pip405/pip405.c b/board/mpl/pip405/pip405.c
index 7c7690f..1bd2fbf 100644
--- a/board/mpl/pip405/pip405.c
+++ b/board/mpl/pip405/pip405.c
@@ -777,7 +777,7 @@ void print_pip405_info (void)
 			((sysman & 0x10) == 0x10) ? "" : "not ");
 	printf ("INIT asserts %sINT1# (NMI)\n",
 			((sysman & 0x20) == 0x20) ? "" : "not ");
-	printf ("INIT occured %d\n", (sysman >> 6) & 0x1);
+	printf ("INIT occurred %d\n", (sysman >> 6) & 0x1);
 	printf ("SER1 is routed to %s\n",
 			((flashcom & 0x1) == 0x1) ? "RS485" : "RS232");
 	printf ("COM2 is routed to %s\n",
diff --git a/board/tqc/tqm5200/cmd_stk52xx.c b/board/tqc/tqm5200/cmd_stk52xx.c
index 9d2d5a8..dc22ee4 100644
--- a/board/tqc/tqm5200/cmd_stk52xx.c
+++ b/board/tqc/tqm5200/cmd_stk52xx.c
@@ -72,7 +72,7 @@ static int spi_transmit(unsigned char data)
 	spi->dr = data;
 	/* wait for SPI transmission completed */
 	while (!(spi->sr & 0x80)) {
-		if (spi->sr & 0x40) {	/* if write collision occured */
+		if (spi->sr & 0x40) {	/* if write collision occurred */
 			int dummy;
 
 			/* do dummy read to clear status register */
diff --git a/cmd/fdc.c b/cmd/fdc.c
index 058ae89..d2281ab 100644
--- a/cmd/fdc.c
+++ b/cmd/fdc.c
@@ -189,7 +189,7 @@ int wait_for_fdc_int(void)
 	while((read_fdc_reg(FDC_SRA)&0x80)==0) {
 		timeout--;
 		udelay(10);
-		if(timeout==0) /* timeout occured */
+		if(timeout==0) /* timeout occurred */
 			return false;
 	}
 	return true;
@@ -205,7 +205,7 @@ int read_fdc_byte(void)
 		/* direction out and ready */
 		udelay(10);
 		timeout--;
-		if(timeout==0) /* timeout occured */
+		if(timeout==0) /* timeout occurred */
 			return -1;
 	}
 	return read_fdc_reg(FDC_FIFO);
@@ -235,7 +235,7 @@ int write_fdc_byte(unsigned char val)
 		timeout--;
 		udelay(10);
 		fdc_need_more_output();
-		if(timeout==0) /* timeout occured */
+		if(timeout==0) /* timeout occurred */
 			return false;
 	}
 	write_fdc_reg(FDC_FIFO,val);
@@ -395,7 +395,7 @@ int fdc_terminate(FDC_COMMAND_STRUCT *pCMD)
 	int i;
 	for(i=0;i<100;i++)
 		udelay(500); /* wait 500usec for fifo overrun */
-	while((read_fdc_reg(FDC_SRA)&0x80)==0x00); /* wait as long as no int has occured */
+	while((read_fdc_reg(FDC_SRA)&0x80)==0x00); /* wait as long as no int has occurred */
 	for(i=0;i<7;i++) {
 		pCMD->result[i]=(unsigned char)read_fdc_byte();
 	}
diff --git a/common/kgdb.c b/common/kgdb.c
index d357463..daf53be 100644
--- a/common/kgdb.c
+++ b/common/kgdb.c
@@ -326,7 +326,7 @@ handle_exception (struct pt_regs *regs)
 		return (0);
 	}
 
-	/* probably should check which exception occured as well */
+	/* probably should check which exception occurred as well */
 	if (longjmp_on_fault) {
 		longjmp_on_fault = 0;
 		kgdb_longjmp(error_jmp_buf, KGDBERR_MEMFAULT);
diff --git a/common/usb_hub.c b/common/usb_hub.c
index e6a2cdb..4f59802 100644
--- a/common/usb_hub.c
+++ b/common/usb_hub.c
@@ -475,7 +475,7 @@ static int usb_scan_port(struct usb_device_scan *usb_scan)
 			return 0;
 
 		/* Otherwise the device will get removed */
-		printf("Port %d over-current occured %d times\n", i + 1,
+		printf("Port %d over-current occurred %d times\n", i + 1,
 		       hub->overcurrent_count[i]);
 	}
 
diff --git a/drivers/ddr/marvell/a38x/ddr3_init.h b/drivers/ddr/marvell/a38x/ddr3_init.h
index cb3fb24..8cb0886 100644
--- a/drivers/ddr/marvell/a38x/ddr3_init.h
+++ b/drivers/ddr/marvell/a38x/ddr3_init.h
@@ -120,7 +120,7 @@
 #define MV_NO_RESOURCE	(0x13)	/* Resource not available (memory ...)   */
 #define MV_FULL		(0x14)	/* Item is full (Queue or table etc...)  */
 #define MV_EMPTY	(0x15)	/* Item is empty (Queue or table etc...) */
-#define MV_INIT_ERROR	(0x16)	/* Error occured while INIT process      */
+#define MV_INIT_ERROR	(0x16)	/* Error occurred while INIT process      */
 #define MV_HW_ERROR	(0x17)	/* Hardware error                        */
 #define MV_TX_ERROR	(0x18)	/* Transmit operation not succeeded      */
 #define MV_RX_ERROR	(0x19)	/* Recieve operation not succeeded       */
diff --git a/drivers/ddr/marvell/axp/ddr3_hw_training.h b/drivers/ddr/marvell/axp/ddr3_hw_training.h
index cffa7c4..343a6b6 100644
--- a/drivers/ddr/marvell/axp/ddr3_hw_training.h
+++ b/drivers/ddr/marvell/axp/ddr3_hw_training.h
@@ -41,7 +41,7 @@
 #define MV_NO_RESOURCE	(0x13)	/* Resource not available (memory ...)   */
 #define MV_FULL		(0x14)	/* Item is full (Queue or table etc...)  */
 #define MV_EMPTY	(0x15)	/* Item is empty (Queue or table etc...) */
-#define MV_INIT_ERROR	(0x16)	/* Error occured while INIT process      */
+#define MV_INIT_ERROR	(0x16)	/* Error occurred while INIT process      */
 #define MV_HW_ERROR	(0x17)	/* Hardware error                        */
 #define MV_TX_ERROR	(0x18)	/* Transmit operation not succeeded      */
 #define MV_RX_ERROR	(0x19)	/* Recieve operation not succeeded       */
diff --git a/drivers/i2c/kona_i2c.c b/drivers/i2c/kona_i2c.c
index 9af496b..11f29d9 100644
--- a/drivers/i2c/kona_i2c.c
+++ b/drivers/i2c/kona_i2c.c
@@ -381,7 +381,7 @@ static int bcm_kona_i2c_write_fifo_single(struct bcm_kona_i2c_dev *dev,
 		return -EREMOTEIO;
 	}
 
-	/* Check if a timeout occured */
+	/* Check if a timeout occurred */
 	if (!time_left) {
 		printf("completion timed out\n");
 		return -EREMOTEIO;
diff --git a/drivers/mtd/nand/omap_gpmc.c b/drivers/mtd/nand/omap_gpmc.c
index 4814fa2..6a45d28 100644
--- a/drivers/mtd/nand/omap_gpmc.c
+++ b/drivers/mtd/nand/omap_gpmc.c
@@ -106,7 +106,7 @@ static uint32_t gen_true_ecc(uint8_t *ecc_buf)
 
 /*
  * omap_correct_data - Compares the ecc read from nand spare area with ECC
- * registers values and corrects one bit error if it has occured
+ * registers values and corrects one bit error if it has occurred
  * Further details can be had from OMAP TRM and the following selected links:
  * http://en.wikipedia.org/wiki/Hamming_code
  * http://www.cs.utexas.edu/users/plaxton/c/337/05f/slides/ErrorCorrection-4.pdf
@@ -479,7 +479,7 @@ static void omap_reverse_list(u8 *list, unsigned int length)
 
 /*
  * omap_correct_data_bch - Compares the ecc read from nand spare area
- * with ECC registers values and corrects one bit error if it has occured
+ * with ECC registers values and corrects one bit error if it has occurred
  *
  * @mtd:	MTD device structure
  * @dat:	page data
diff --git a/drivers/net/4xx_enet.c b/drivers/net/4xx_enet.c
index 3c30f42..bc52ed3 100644
--- a/drivers/net/4xx_enet.c
+++ b/drivers/net/4xx_enet.c
@@ -1726,7 +1726,7 @@ static void mal_err (struct eth_device *dev, unsigned long isr,
 	mtdcr (MAL0_RXDEIR, 0x80000000);
 
 #ifdef INFO_4XX_ENET
-	printf("\nMAL error occured.... ISR = %lx UIC = = %lx	MAL_DEF = %lx  MAL_ERR= %lx\n",
+	printf("\nMAL error occurred.... ISR = %lx UIC = = %lx	MAL_DEF = %lx  MAL_ERR= %lx\n",
 	       isr, uic, maldef, mal_errr);
 #endif
 
@@ -1740,7 +1740,7 @@ static void emac_err (struct eth_device *dev, unsigned long isr)
 {
 	EMAC_4XX_HW_PST hw_p = dev->priv;
 
-	printf ("EMAC%d error occured.... ISR = %lx\n", hw_p->devnum, isr);
+	printf ("EMAC%d error occurred.... ISR = %lx\n", hw_p->devnum, isr);
 	out_be32((void *)EMAC0_ISR + hw_p->hw_addr, isr);
 }
 
diff --git a/drivers/net/enc28j60.c b/drivers/net/enc28j60.c
index 59ea11c..611eabb 100644
--- a/drivers/net/enc28j60.c
+++ b/drivers/net/enc28j60.c
@@ -381,7 +381,7 @@ static int enc_phy_link_wait(enc_dev_t *enc)
 		udelay(1000);
 	}
 
-	/* timeout occured */
+	/* timeout occurred */
 	printf("%s: link down\n", enc->dev->name);
 	return 1;
 }
diff --git a/drivers/net/ne2000_base.c b/drivers/net/ne2000_base.c
index 71d133c..67bf140 100644
--- a/drivers/net/ne2000_base.c
+++ b/drivers/net/ne2000_base.c
@@ -582,7 +582,7 @@ dp83902a_Overflow(void)
 	/*
 	 * Read in as many packets as we can and acknowledge any and receive
 	 * interrupts. Since the buffer has overflowed, a receive event of
-	 * some kind will have occured.
+	 * some kind will have occurred.
 	 */
 	dp83902a_RxEvent();
 	DP_OUT(base, DP_ISR, DP_ISR_RxP|DP_ISR_RxE);
@@ -592,7 +592,7 @@ dp83902a_Overflow(void)
 	DP_OUT(base, DP_TCR, DP_TCR_NORMAL);
 
 	/*
-	 * If a transmit command was issued, but no transmit event has occured,
+	 * If a transmit command was issued, but no transmit event has occurred,
 	 * restart it here.
 	 */
 	DP_IN(base, DP_ISR, isr);
diff --git a/drivers/usb/gadget/mpc8xx_udc.c b/drivers/usb/gadget/mpc8xx_udc.c
index b3e178a..ad5ea7a 100644
--- a/drivers/usb/gadget/mpc8xx_udc.c
+++ b/drivers/usb/gadget/mpc8xx_udc.c
@@ -170,7 +170,7 @@ int udc_init (void)
 
 /* udc_irq
  *
- * Poll for whatever events may have occured
+ * Poll for whatever events may have occurred
  */
 void udc_irq (void)
 {
diff --git a/drivers/usb/musb/musb_hcd.c b/drivers/usb/musb/musb_hcd.c
index 9a3b61a..4947936 100644
--- a/drivers/usb/musb/musb_hcd.c
+++ b/drivers/usb/musb/musb_hcd.c
@@ -73,9 +73,9 @@ static void write_toggle(struct usb_device *dev, u8 ep, u8 dir_out)
 }
 
 /*
- * This function checks if RxStall has occured on the endpoint. If a RxStall
- * has occured, the RxStall is cleared and 1 is returned. If RxStall has
- * not occured, 0 is returned.
+ * This function checks if RxStall has occurred on the endpoint. If a RxStall
+ * has occurred, the RxStall is cleared and 1 is returned. If RxStall has
+ * not occurred, 0 is returned.
  */
 static u8 check_stall(u8 ep, u8 dir_out)
 {
diff --git a/include/linux/fb.h b/include/linux/fb.h
index 652cf3b..fcf331b 100644
--- a/include/linux/fb.h
+++ b/include/linux/fb.h
@@ -388,14 +388,14 @@ struct fb_cursor_user {
 #define FB_EVENT_GET_CONSOLE_MAP	0x07
 /*	CONSOLE-SPECIFIC: set console to framebuffer mapping */
 #define FB_EVENT_SET_CONSOLE_MAP	0x08
-/*	A hardware display blank change occured */
+/*	A hardware display blank change occurred */
 #define FB_EVENT_BLANK			0x09
 /*	Private modelist is to be replaced */
 #define FB_EVENT_NEW_MODELIST		0x0A
 /*	The resolution of the passed in fb_info about to change and
 	all vc's should be changed	   */
 #define FB_EVENT_MODE_CHANGE_ALL	0x0B
-/*	A software display blank change occured */
+/*	A software display blank change occurred */
 #define FB_EVENT_CONBLANK		0x0C
 /*	Get drawing requirements	*/
 #define FB_EVENT_GET_REQ		0x0D
diff --git a/include/test/ut.h b/include/test/ut.h
index da7c1a9..85434d7 100644
--- a/include/test/ut.h
+++ b/include/test/ut.h
@@ -17,9 +17,9 @@ struct unit_test_state;
  * ut_fail() - Record failure of a unit test
  *
  * @uts: Test state
- * @fname: Filename where the error occured
- * @line: Line number where the error occured
- * @func: Function name where the error occured
+ * @fname: Filename where the error occurred
+ * @line: Line number where the error occurred
+ * @func: Function name where the error occurred
  * @cond: The condition that failed
  */
 void ut_fail(struct unit_test_state *uts, const char *fname, int line,
@@ -29,9 +29,9 @@ void ut_fail(struct unit_test_state *uts, const char *fname, int line,
  * ut_failf() - Record failure of a unit test
  *
  * @uts: Test state
- * @fname: Filename where the error occured
- * @line: Line number where the error occured
- * @func: Function name where the error occured
+ * @fname: Filename where the error occurred
+ * @line: Line number where the error occurred
+ * @func: Function name where the error occurred
  * @cond: The condition that failed
  * @fmt: printf() format string for the error, followed by args
  */
diff --git a/include/usbdevice.h b/include/usbdevice.h
index da5af6e..f27e17f 100644
--- a/include/usbdevice.h
+++ b/include/usbdevice.h
@@ -438,7 +438,7 @@ typedef enum usb_device_event {
 	DEVICE_HUB_RESET,	/* bi  - bus has been unplugged */
 	DEVICE_DESTROY,		/* bi  - device instance should be destroyed */
 
-	DEVICE_HOTPLUG,		/* bi  - a hotplug event has occured */
+	DEVICE_HOTPLUG,		/* bi  - a hotplug event has occurred */
 
 	DEVICE_FUNCTION_PRIVATE,	/* function - private */
 
-- 
2.1.4



More information about the U-Boot mailing list