[U-Boot] [PATCHv4 2/2] Add support the Avionic Design Meerkat COM and Kein Baseboard

Julian Scheel julian at jusst.de
Mon May 2 13:22:33 CEST 2016


Add support for platforms based on the Meerkat COM module. Includes support
for the minimal reference platform called Kein Baseboard, which in fact is
sufficient to run most existing Meerkat carriers.

Signed-off-by: Julian Scheel <julian at jusst.de>
---

Changes in v4:
 - rebased to tegra/master (2016-05-22, cc9db6a)

Changes in v3:
 - Remove bad as3722 gpio manipulations on pcie init (this time for real)

Changes in v2:
 - Rename config options to TARGET_KEIN_BASEBOARD
 - Remove unnecessary CONFIG options from kein-baseboard.h
 - Add clocks to meerkat dtsi, as it was removed from tegra124-dtsi lately
---
 arch/arm/dts/Makefile                              |   1 +
 arch/arm/dts/tegra124-kein-baseboard.dts           |  66 ++++
 arch/arm/dts/tegra124-meerkat.dtsi                 | 408 +++++++++++++++++++++
 arch/arm/mach-tegra/tegra124/Kconfig               |   9 +
 board/avionic-design/common/meerkat.c              |  57 +++
 .../avionic-design/common/pinmux-config-meerkat.h  | 233 ++++++++++++
 board/avionic-design/kein-baseboard/Kconfig        |  15 +
 board/avionic-design/kein-baseboard/MAINTAINERS    |   7 +
 board/avionic-design/kein-baseboard/Makefile       |   9 +
 configs/kein-baseboard_defconfig                   |  21 ++
 include/configs/kein-baseboard.h                   |  71 ++++
 11 files changed, 897 insertions(+)
 create mode 100644 arch/arm/dts/tegra124-kein-baseboard.dts
 create mode 100644 arch/arm/dts/tegra124-meerkat.dtsi
 create mode 100644 board/avionic-design/common/meerkat.c
 create mode 100644 board/avionic-design/common/pinmux-config-meerkat.h
 create mode 100644 board/avionic-design/kein-baseboard/Kconfig
 create mode 100644 board/avionic-design/kein-baseboard/MAINTAINERS
 create mode 100644 board/avionic-design/kein-baseboard/Makefile
 create mode 100644 configs/kein-baseboard_defconfig
 create mode 100644 include/configs/kein-baseboard.h

diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 0915e05..a0135b7 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -41,6 +41,7 @@ dtb-$(CONFIG_TEGRA) += tegra20-harmony.dtb \
 	tegra30-tec-ng.dtb \
 	tegra114-dalmore.dtb \
 	tegra124-jetson-tk1.dtb \
+	tegra124-kein-baseboard.dtb \
 	tegra124-nyan-big.dtb \
 	tegra124-venice2.dtb \
 	tegra210-e2220-1170.dtb \
diff --git a/arch/arm/dts/tegra124-kein-baseboard.dts b/arch/arm/dts/tegra124-kein-baseboard.dts
new file mode 100644
index 0000000..75a0b99
--- /dev/null
+++ b/arch/arm/dts/tegra124-kein-baseboard.dts
@@ -0,0 +1,66 @@
+/dts-v1/;
+
+#include "tegra124-meerkat.dtsi"
+
+/ {
+	model = "Avionic Design Kein Baseboard";
+	compatible = "ad,kein-baseboard", "ad,meerkat", "nvidia,tegra124";
+
+	chosen {
+		stdout-path = &uartd;
+	};
+
+	serial at 70006300 {
+		status = "okay";
+	};
+
+	sdhci at 700b0400 {
+		status = "okay";
+	};
+
+	usb at 7d000000 {
+		status = "okay";
+	};
+
+	usb at 7d004000 {
+		status = "okay";
+	};
+
+	usb at 7d008000 {
+		status = "okay";
+	};
+
+	pcie-controller at 01003000 {
+		status = "okay";
+
+		pci at 1,0 {
+			status = "okay";
+		};
+
+		pci at 2,0 {
+			status = "okay";
+		};
+	};
+
+	regulators {
+		vdd_5v0: regulator at 100 {
+			compatible = "regulator-fixed";
+			reg = <100>;
+			regulator-name = "+VDD_5V";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		vdd_3v3: regulator at 101 {
+			compatible = "regulator-fixed";
+			reg = <101>;
+			regulator-name = "+VDD_3V3";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+	};
+};
diff --git a/arch/arm/dts/tegra124-meerkat.dtsi b/arch/arm/dts/tegra124-meerkat.dtsi
new file mode 100644
index 0000000..a056542
--- /dev/null
+++ b/arch/arm/dts/tegra124-meerkat.dtsi
@@ -0,0 +1,408 @@
+
+#include "tegra124.dtsi"
+
+/ {
+	model = "Avionic-Design Meerkat";
+	compatible = "ad,meerkat", "nvidia,tegra124";
+
+	aliases {
+		i2c0 = "/i2c at 7000c000";
+		i2c1 = "/i2c at 7000c400";
+		i2c2 = "/i2c at 7000c500";
+		i2c3 = "/i2c at 7000c700";
+		i2c4 = "/i2c at 7000d000";
+		i2c5 = "/i2c at 7000d100";
+
+		sdhci0 = "/sdhci at 700b0600";
+		sdhci1 = "/sdhci at 700b0400";
+
+		usb0 = "/usb at 7d000000";
+		usb1 = "/usb at 7d008000";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x80000000>;
+	};
+
+	pcie-controller at 01003000 {
+		avddio-pex-supply = <&vdd_1v05_run>;
+		dvddio-pex-supply = <&vdd_1v05_run>;
+		avdd-pex-pll-supply = <&vdd_1v05_run>;
+		hvdd-pex-supply = <&vdd_3v3_lp0>;
+		hvdd-pex-pll-e-supply = <&vdd_3v3_lp0>;
+		vddio-pex-ctl-supply = <&vdd_3v3_lp0>;
+		avdd-pll-erefe-supply = <&avdd_1v05_run>;
+	};
+
+	/* Expansion GEN1_I2C_* */
+	i2c at 7000c000 {
+		clock-frequency = <100000>;
+	};
+
+	/* Expansion GEN2_I2C_* */
+	i2c at 7000c400 {
+		clock-frequency = <100000>;
+	};
+
+	/* Expansion CAM_I2C_* */
+	i2c at 7000c500 {
+		clock-frequency = <100000>;
+	};
+
+	/* HDMI DDC */
+	hdmi_ddc: i2c at 7000c700 {
+		clock-frequency = <100000>;
+	};
+
+	/* Expansion PWR_I2C_*, on-board components */
+	i2c at 7000d000 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		pmic: pmic at 40 {
+			compatible = "ams,as3722";
+			reg = <0x40>;
+			interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
+
+			ams,system-power-controller;
+
+			#interrupt-cells = <2>;
+			interrupt-controller;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&as3722_default>;
+
+			as3722_default: pinmux {
+				gpio0 {
+					pins = "gpio0";
+					function = "gpio";
+					bias-pull-down;
+				};
+
+				gpio1_2_4_7 {
+					pins = "gpio1", "gpio2", "gpio4", "gpio7";
+					function = "gpio";
+					bias-pull-up;
+				};
+
+				gpio3_5_6 {
+					pins = "gpio3", "gpio5", "gpio6";
+					bias-high-impedance;
+				};
+			};
+
+			regulators {
+				vsup-sd2-supply = <&vdd_5v0_sys>;
+				vsup-sd3-supply = <&vdd_5v0_sys>;
+				vsup-sd4-supply = <&vdd_5v0_sys>;
+				vsup-sd5-supply = <&vdd_5v0_sys>;
+				vin-ldo0-supply = <&vdd_1v35_lp0>;
+				vin-ldo1-6-supply = <&vdd_3v3_run>;
+				vin-ldo2-5-7-supply = <&vddio_1v8>;
+				vin-ldo3-4-supply = <&vdd_3v3_sys>;
+				vin-ldo9-10-supply = <&vdd_5v0_sys>;
+				vin-ldo11-supply = <&vdd_3v3_run>;
+
+				vdd_cpu: sd0 {
+					regulator-name = "+VDD_CPU_AP";
+					regulator-min-microvolt = <700000>;
+					regulator-max-microvolt = <1400000>;
+					regulator-min-microamp = <3500000>;
+					regulator-max-microamp = <3500000>;
+					regulator-always-on;
+					regulator-boot-on;
+					ams,ext-control = <2>;
+				};
+
+				sd1 {
+					regulator-name = "+VDD_CORE";
+					regulator-min-microvolt = <700000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-min-microamp = <2500000>;
+					regulator-max-microamp = <2500000>;
+					regulator-always-on;
+					regulator-boot-on;
+					ams,ext-control = <1>;
+				};
+
+				vdd_1v35_lp0: sd2 {
+					regulator-name = "+1V35_LP0(sd2)";
+					regulator-min-microvolt = <1350000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				sd3 {
+					regulator-name = "+1V35_LP0(sd3)";
+					regulator-min-microvolt = <1350000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				vdd_1v05_run: sd4 {
+					regulator-name = "+1V05_RUN";
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+				};
+
+				vddio_1v8: sd5 {
+					regulator-name = "+1V8_VDDIO";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-boot-on;
+					regulator-always-on;
+				};
+
+				vdd_gpu: sd6 {
+					regulator-name = "+VDD_GPU_AP";
+					regulator-min-microvolt = <650000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-min-microamp = <3500000>;
+					regulator-max-microamp = <3500000>;
+					regulator-boot-on;
+					regulator-always-on;
+				};
+
+				avdd_1v05_run: ldo0 {
+					regulator-name = "+1V05_RUN_AVDD";
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+					regulator-boot-on;
+					regulator-always-on;
+					ams,ext-control = <1>;
+				};
+
+				ldo1 {
+					regulator-name = "+1V8_RUN_CAM";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				ldo2 {
+					regulator-name = "+1V2_GEN_AVDD";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-boot-on;
+					regulator-always-on;
+				};
+
+				ldo3 {
+					regulator-name = "+1V05_LP0_VDD_RTC";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-boot-on;
+					regulator-always-on;
+					ams,enable-tracking;
+				};
+
+				ldo4 {
+					regulator-name = "+2V8_RUN_CAM";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+				};
+
+				ldo5 {
+					regulator-name = "+1V2_RUN_CAM_FRONT";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+				};
+
+				vddio_sdmmc3: ldo6 {
+					regulator-name = "+VDDIO_SDMMC3";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				ldo7 {
+					regulator-name = "+1V05_RUN_CAM_REAR";
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+				};
+
+				ldo9 {
+					regulator-name = "+3V3_RUN_TOUCH";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+				};
+
+				ldo10 {
+					regulator-name = "+2V8_RUN_CAM_AF";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+				};
+
+				ldo11 {
+					regulator-name = "+1V8_RUN_VPP_FUSE";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+			};
+		};
+	};
+
+	i2c at 7000d100 {
+		clock-frequency = <400000>;
+	};
+
+	spi at 7000d400 {
+		spi-max-frequency = <25000000>;
+	};
+
+	spi at 7000da00 {
+		spi-max-frequency = <25000000>;
+	};
+
+	padctl at 7009f000 {
+		pinctrl-0 = <&padctl_default>;
+		pinctrl-names = "default";
+
+		padctl_default: pinmux {
+			usb3 {
+				nvidia,lanes = "pcie-0", "pcie-1";
+				nvidia,function = "usb3";
+				nvidia,iddq = <0>;
+			};
+
+			pcie {
+				nvidia,lanes = "pcie-2", "pcie-3",
+					       "pcie-4";
+				nvidia,function = "pcie";
+				nvidia,iddq = <0>;
+			};
+
+			sata {
+				nvidia,lanes = "sata-0";
+				nvidia,function = "sata";
+				nvidia,iddq = <0>;
+			};
+		};
+	};
+
+	sdhci at 700b0400 {
+		cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
+		power-gpios = <&gpio TEGRA_GPIO(R, 0) GPIO_ACTIVE_HIGH>;
+		bus-width = <4>;
+	};
+
+	sdhci at 700b0600 {
+		status = "okay";
+		bus-width = <8>;
+	};
+
+	usb at 7d000000 {
+		dr_mode = "otg";
+		nvidia,vbus-gpio = <&gpio TEGRA_GPIO(N, 4) GPIO_ACTIVE_HIGH>;
+	};
+
+	usb at 7d004000 {
+		phy_type = "utmi";
+		nvidia,vbus-gpio = <&gpio TEGRA_GPIO(N, 5) GPIO_ACTIVE_HIGH>;
+	};
+
+	usb at 7d008000 {
+		nvidia,vbus-gpio = <&gpio TEGRA_GPIO(FF, 1) GPIO_ACTIVE_HIGH>;
+	};
+
+	clocks {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		clk32k_in: clock at 0 {
+			compatible = "fixed-clock";
+			reg = <0>;
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		vdd_mux: regulator at 0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "+VDD_MUX";
+			regulator-min-microvolt = <12000000>;
+			regulator-max-microvolt = <12000000>;
+			regulator-always-on;
+			regulator-boot-on;
+			vin-supply = <&vdd_5v0>;
+		};
+
+		vdd_5v0_sys: regulator at 1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "+5V_SYS";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-always-on;
+			regulator-boot-on;
+			vin-supply = <&vdd_mux>;
+		};
+
+		vdd_3v3_sys: regulator at 2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "+3.3V_SYS";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+			regulator-boot-on;
+			vin-supply = <&vdd_3v3>;
+		};
+
+		vdd_3v3_run: regulator at 3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			regulator-name = "+3.3V_RUN";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&pmic 1 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+			vin-supply = <&vdd_3v3_sys>;
+		};
+
+		vdd_3v3_hdmi: regulator at 4 {
+			compatible = "regulator-fixed";
+			reg = <4>;
+			regulator-name = "+3.3V_AVDD_HDMI_AP_GATED";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			vin-supply = <&vdd_3v3_run>;
+		};
+
+		vdd_3v3_lp0: regulator at 5 {
+			compatible = "regulator-fixed";
+			reg = <5>;
+			regulator-name = "+3.3V_LP0";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&pmic 2 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+			vin-supply = <&vdd_3v3_sys>;
+		};
+
+		vdd_hdmi_pll: regulator at 6 {
+			compatible = "regulator-fixed";
+			reg = <6>;
+			regulator-name = "+1.05V_RUN_AVDD_HDMI_PLL";
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1050000>;
+			gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_LOW>;
+			vin-supply = <&vdd_1v05_run>;
+		};
+	};
+};
diff --git a/arch/arm/mach-tegra/tegra124/Kconfig b/arch/arm/mach-tegra/tegra124/Kconfig
index f3324ff..dd65d5d 100644
--- a/arch/arm/mach-tegra/tegra124/Kconfig
+++ b/arch/arm/mach-tegra/tegra124/Kconfig
@@ -21,6 +21,14 @@ config TARGET_NYAN_BIG
 config TARGET_VENICE2
 	bool "NVIDIA Tegra124 Venice2"
 
+config TARGET_KEIN_BASEBOARD
+	bool "Avionic Design Kein Baseboard"
+	select CPU_V7_HAS_NONSEC if !SPL_BUILD
+	select CPU_V7_HAS_VIRT if !SPL_BUILD
+	help
+	  Minimal baseboard for Avionic Design Meerkat COM. Should work with most
+	  baseboard that follow the reference design.
+
 endchoice
 
 config SYS_SOC
@@ -29,5 +37,6 @@ config SYS_SOC
 source "board/nvidia/jetson-tk1/Kconfig"
 source "board/nvidia/nyan-big/Kconfig"
 source "board/nvidia/venice2/Kconfig"
+source "board/avionic-design/kein-baseboard/Kconfig"
 
 endif
diff --git a/board/avionic-design/common/meerkat.c b/board/avionic-design/common/meerkat.c
new file mode 100644
index 0000000..30def80
--- /dev/null
+++ b/board/avionic-design/common/meerkat.c
@@ -0,0 +1,57 @@
+/*
+ * (C) Copyright 2014, NVIDIA Corporation <www.nvidia.com>
+ * (C) Copyright 2015, Avionic Design <www.avionic-design.de>
+ *
+ * SPDX-License-Identifier:     GPL-2.0+
+ */
+
+#include <common.h>
+#include <errno.h>
+#include <power/as3722.h>
+
+#include <asm/arch/gpio.h>
+#include <asm/arch/pinmux.h>
+#include "pinmux-config-meerkat.h"
+
+/*
+ * Routine: pinmux_init
+ * Description: Do individual peripheral pinmux configs
+ */
+void pinmux_init(void)
+{
+	pinmux_set_tristate_input_clamping();
+
+	pinmux_config_pingrp_table(meerkat_pingrps,
+				   ARRAY_SIZE(meerkat_pingrps));
+
+	pinmux_config_drvgrp_table(meerkat_drvgrps,
+				   ARRAY_SIZE(meerkat_drvgrps));
+}
+
+#ifdef CONFIG_PCI_TEGRA
+int tegra_pcie_board_init(void)
+{
+	struct udevice *pmic;
+	int err;
+
+	err = as3722_init(&pmic, 4, 0x40);
+	if (err) {
+		error("failed to initialize AS3722 PMIC: %d\n", err);
+		return err;
+	}
+
+	err = as3722_sd_enable(pmic, 4);
+	if (err < 0) {
+		error("failed to enable SD4: %d\n", err);
+		return err;
+	}
+
+	err = as3722_sd_set_voltage(pmic, 4, 0x24);
+	if (err < 0) {
+		error("failed to set SD4 voltage: %d\n", err);
+		return err;
+	}
+
+	return 0;
+}
+#endif /* PCI */
diff --git a/board/avionic-design/common/pinmux-config-meerkat.h b/board/avionic-design/common/pinmux-config-meerkat.h
new file mode 100644
index 0000000..6be55fd
--- /dev/null
+++ b/board/avionic-design/common/pinmux-config-meerkat.h
@@ -0,0 +1,233 @@
+/*
+ * Copyright (c) 2014, NVIDIA CORPORATION. All rights reserved.
+ * Copyright (c) 2015, Avionic Design GmbH
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef _PINMUX_CONFIG_MEERKAT_H_
+#define _PINMUX_CONFIG_MEERKAT_H_
+
+#define PINCFG(_pingrp, _mux, _pull, _tri, _io, _od, _rcv_sel)	\
+	{							\
+		.pingrp		= PMUX_PINGRP_##_pingrp,	\
+		.func		= PMUX_FUNC_##_mux,		\
+		.pull		= PMUX_PULL_##_pull,		\
+		.tristate	= PMUX_TRI_##_tri,		\
+		.io		= PMUX_PIN_##_io,		\
+		.od		= PMUX_PIN_OD_##_od,		\
+		.rcv_sel	= PMUX_PIN_RCV_SEL_##_rcv_sel,	\
+		.lock		= PMUX_PIN_LOCK_DEFAULT,	\
+		.ioreset	= PMUX_PIN_IO_RESET_DEFAULT,	\
+	}
+
+static const struct pmux_pingrp_config meerkat_pingrps[] = {
+	/*     pingrp,                 mux,          pull,   tri,      e_input, od,      rcv_sel */
+	PINCFG(CLK_32K_OUT_PA0,        SOC,          UP,     NORMAL,   INPUT,   DEFAULT, DEFAULT),
+	PINCFG(UART3_CTS_N_PA1,        UARTC,        UP,     NORMAL,   INPUT,   DEFAULT, DEFAULT),
+	PINCFG(DAP2_FS_PA2,            I2S1,         NORMAL, NORMAL,   INPUT,   DEFAULT, DEFAULT),
+	PINCFG(DAP2_SCLK_PA3,          I2S1,         NORMAL, NORMAL,   INPUT,   DEFAULT, DEFAULT),
+	PINCFG(DAP2_DIN_PA4,           I2S1,         NORMAL, NORMAL,   INPUT,   DEFAULT, DEFAULT),
+	PINCFG(DAP2_DOUT_PA5,          I2S1,         NORMAL, NORMAL,   INPUT,   DEFAULT, DEFAULT),
+	PINCFG(SDMMC3_CLK_PA6,         SDMMC3,       NORMAL, NORMAL,   OUTPUT,  DEFAULT, DEFAULT),
+	PINCFG(SDMMC3_CMD_PA7,         SDMMC3,       UP,     NORMAL,   INPUT,   DEFAULT, DEFAULT),
+	PINCFG(PB0,                    UARTD,        UP,     NORMAL,   INPUT,   DEFAULT, DEFAULT),
+	PINCFG(PB1,                    UARTD,        UP,     NORMAL,   INPUT,   DEFAULT, DEFAULT),
+	PINCFG(SDMMC3_DAT3_PB4,        SDMMC3,       UP,     NORMAL,   INPUT,   DEFAULT, DEFAULT),
+	PINCFG(SDMMC3_DAT2_PB5,        SDMMC3,       UP,     NORMAL,   INPUT,   DEFAULT, DEFAULT),
+	PINCFG(SDMMC3_DAT1_PB6,        SDMMC3,       UP,     NORMAL,   INPUT,   DEFAULT, DEFAULT),
+	PINCFG(SDMMC3_DAT0_PB7,        SDMMC3,       UP,     NORMAL,   INPUT,   DEFAULT, DEFAULT),
+	PINCFG(UART3_RTS_N_PC0,        UARTC,        NORMAL, NORMAL,   OUTPUT,  DEFAULT, DEFAULT),
+	PINCFG(UART2_TXD_PC2,          IRDA,         NORMAL, NORMAL,   OUTPUT,  DEFAULT, DEFAULT),
+	PINCFG(UART2_RXD_PC3,          IRDA,         UP,     NORMAL,   INPUT,   DEFAULT, DEFAULT),
+	PINCFG(GEN1_I2C_SCL_PC4,       I2C1,         NORMAL, NORMAL,   INPUT,   ENABLE,  DEFAULT),
+	PINCFG(GEN1_I2C_SDA_PC5,       I2C1,         NORMAL, NORMAL,   INPUT,   ENABLE,  DEFAULT),
+	PINCFG(PC7,                    DEFAULT,      UP,     NORMAL,   INPUT,   DEFAULT, DEFAULT),
+	PINCFG(PG0,                    DEFAULT,      NORMAL, NORMAL,   OUTPUT,  DEFAULT, DEFAULT),
+	PINCFG(PG1,                    DEFAULT,      NORMAL, NORMAL,   OUTPUT,  DEFAULT, DEFAULT),
+	PINCFG(PG2,                    DEFAULT,      DOWN,   NORMAL,   INPUT,   DEFAULT, DEFAULT),
+	PINCFG(PG3,                    DEFAULT,      DOWN,   NORMAL,   INPUT,   DEFAULT, DEFAULT),
+	PINCFG(PG4,                    SPI4,         NORMAL, NORMAL,   OUTPUT,  DEFAULT, DEFAULT),
+	PINCFG(PG5,                    SPI4,         NORMAL, NORMAL,   OUTPUT,  DEFAULT, DEFAULT),
+	PINCFG(PG6,                    SPI4,         NORMAL, NORMAL,   OUTPUT,  DEFAULT, DEFAULT),
+	PINCFG(PG7,                    SPI4,         NORMAL, NORMAL,   INPUT,   DEFAULT, DEFAULT),
+	PINCFG(PH0,                    GMI,          DOWN,   TRISTATE, OUTPUT,  DEFAULT, DEFAULT),
+	PINCFG(PH1,                    PWM1,         NORMAL, NORMAL,   OUTPUT,  DEFAULT, DEFAULT),
+	PINCFG(PH2,                    DEFAULT,      NORMAL, NORMAL,   OUTPUT,  DEFAULT, DEFAULT),
+	PINCFG(PH3,                    DEFAULT,      NORMAL, NORMAL,   OUTPUT,  DEFAULT, DEFAULT),
+	PINCFG(PH4,                    DEFAULT,      UP,     NORMAL,   INPUT,   DEFAULT, DEFAULT),
+	PINCFG(PH5,                    DEFAULT,      NORMAL, NORMAL,   OUTPUT,  DEFAULT, DEFAULT),
+	PINCFG(PH6,                    DEFAULT,      UP,     NORMAL,   INPUT,   DEFAULT, DEFAULT),
+	PINCFG(PH7,                    DEFAULT,      NORMAL, NORMAL,   OUTPUT,  DEFAULT, DEFAULT),
+	PINCFG(PI0,                    DEFAULT,      NORMAL, NORMAL,   OUTPUT,  DEFAULT, DEFAULT),
+	PINCFG(PI1,                    RSVD1,        DOWN,   TRISTATE, OUTPUT,  DEFAULT, DEFAULT),
+	PINCFG(PI2,                    DEFAULT,      NORMAL, NORMAL,   OUTPUT,  DEFAULT, DEFAULT),
+	PINCFG(PI3,                    SPI4,         NORMAL, NORMAL,   OUTPUT,  DEFAULT, DEFAULT),
+	PINCFG(PI4,                    DEFAULT,      NORMAL, NORMAL,   OUTPUT,  DEFAULT, DEFAULT),
+	PINCFG(PI5,                    DEFAULT,      UP,     NORMAL,   INPUT,   DEFAULT, DEFAULT),
+	PINCFG(PI6,                    DEFAULT,      UP,     NORMAL,   INPUT,   DEFAULT, DEFAULT),
+	PINCFG(PI7,                    RSVD1,        DOWN,   TRISTATE, OUTPUT,  DEFAULT, DEFAULT),
+	PINCFG(PJ0,                    DEFAULT,      UP,     NORMAL,   INPUT,   DEFAULT, DEFAULT),
+	PINCFG(PJ2,                    DEFAULT,      UP,     NORMAL,   INPUT,   DEFAULT, DEFAULT),
+	PINCFG(UART2_CTS_N_PJ5,        UARTB,        UP,     NORMAL,   INPUT,   DEFAULT, DEFAULT),
+	PINCFG(UART2_RTS_N_PJ6,        UARTB,        NORMAL, NORMAL,   OUTPUT,  DEFAULT, DEFAULT),
+	PINCFG(PJ7,                    UARTD,        NORMAL, NORMAL,   OUTPUT,  DEFAULT, DEFAULT),
+	PINCFG(PK0,                    SOC,          UP,     NORMAL,   INPUT,   DEFAULT, DEFAULT),
+	PINCFG(PK1,                    DEFAULT,      NORMAL, NORMAL,   OUTPUT,  DEFAULT, DEFAULT),
+	PINCFG(PK2,                    DEFAULT,      UP,     NORMAL,   INPUT,   DEFAULT, DEFAULT),
+	PINCFG(PK3,                    DEFAULT,      UP,     NORMAL,   INPUT,   DEFAULT, DEFAULT),
+	PINCFG(PK4,                    DEFAULT,      NORMAL, NORMAL,   OUTPUT,  DEFAULT, DEFAULT),
+	PINCFG(SPDIF_OUT_PK5,          DEFAULT,      NORMAL, NORMAL,   OUTPUT,  DEFAULT, DEFAULT),
+	PINCFG(SPDIF_IN_PK6,           DEFAULT,      NORMAL, NORMAL,   OUTPUT,  DEFAULT, DEFAULT),
+	PINCFG(PK7,                    UARTD,        NORMAL, NORMAL,   OUTPUT,  DEFAULT, DEFAULT),
+	PINCFG(DAP1_FS_PN0,            I2S0,         DOWN,   NORMAL,   INPUT,   DEFAULT, DEFAULT),
+	PINCFG(DAP1_DIN_PN1,           I2S0,         DOWN,   NORMAL,   INPUT,   DEFAULT, DEFAULT),
+	PINCFG(DAP1_DOUT_PN2,          SATA,         NORMAL, NORMAL,   OUTPUT,  DEFAULT, DEFAULT),
+	PINCFG(DAP1_SCLK_PN3,          I2S0,         DOWN,   NORMAL,   INPUT,   DEFAULT, DEFAULT),
+	PINCFG(USB_VBUS_EN0_PN4,       USB,          UP,     NORMAL,   INPUT,   ENABLE,  DEFAULT),
+	PINCFG(USB_VBUS_EN1_PN5,       USB,          UP,     NORMAL,   INPUT,   ENABLE,  DEFAULT),
+	PINCFG(HDMI_INT_PN7,           DEFAULT,      DOWN,   NORMAL,   INPUT,   DEFAULT, NORMAL),
+	PINCFG(ULPI_DATA7_PO0,         DEFAULT,      UP,     NORMAL,   INPUT,   DEFAULT, DEFAULT),
+	PINCFG(ULPI_DATA0_PO1,         DEFAULT,      UP,     NORMAL,   INPUT,   DEFAULT, DEFAULT),
+	PINCFG(ULPI_DATA1_PO2,         DEFAULT,      UP,     NORMAL,   INPUT,   DEFAULT, DEFAULT),
+	PINCFG(ULPI_DATA2_PO3,         DEFAULT,      UP,     NORMAL,   INPUT,   DEFAULT, DEFAULT),
+	PINCFG(ULPI_DATA3_PO4,         DEFAULT,      UP,     NORMAL,   INPUT,   DEFAULT, DEFAULT),
+	PINCFG(ULPI_DATA4_PO5,         DEFAULT,      UP,     NORMAL,   INPUT,   DEFAULT, DEFAULT),
+	PINCFG(ULPI_DATA5_PO6,         DEFAULT,      NORMAL, NORMAL,   OUTPUT,  DEFAULT, DEFAULT),
+	PINCFG(ULPI_DATA6_PO7,         DEFAULT,      UP,     NORMAL,   INPUT,   DEFAULT, DEFAULT),
+	PINCFG(DAP3_FS_PP0,            DEFAULT,      NORMAL, NORMAL,   OUTPUT,  DEFAULT, DEFAULT),
+	PINCFG(DAP3_DIN_PP1,           DEFAULT,      NORMAL, NORMAL,   OUTPUT,  DEFAULT, DEFAULT),
+	PINCFG(DAP3_DOUT_PP2,          DEFAULT,      NORMAL, NORMAL,   OUTPUT,  DEFAULT, DEFAULT),
+	PINCFG(DAP3_SCLK_PP3,          RSVD3,        DOWN,   TRISTATE, OUTPUT,  DEFAULT, DEFAULT),
+	PINCFG(DAP4_FS_PP4,            I2S3,         DOWN,   NORMAL,   INPUT,   DEFAULT, DEFAULT),
+	PINCFG(DAP4_DIN_PP5,           I2S3,         DOWN,   NORMAL,   INPUT,   DEFAULT, DEFAULT),
+	PINCFG(DAP4_DOUT_PP6,          I2S3,         DOWN,   NORMAL,   INPUT,   DEFAULT, DEFAULT),
+	PINCFG(DAP4_SCLK_PP7,          I2S3,         DOWN,   NORMAL,   INPUT,   DEFAULT, DEFAULT),
+	PINCFG(KB_COL0_PQ0,            DEFAULT,      UP,     NORMAL,   INPUT,   DEFAULT, DEFAULT),
+	PINCFG(KB_COL1_PQ1,            DEFAULT,      UP,     NORMAL,   INPUT,   DEFAULT, DEFAULT),
+	PINCFG(KB_COL2_PQ2,            DEFAULT,      UP,     NORMAL,   INPUT,   DEFAULT, DEFAULT),
+	PINCFG(KB_COL3_PQ3,            KBC,          DOWN,   TRISTATE, OUTPUT,  DEFAULT, DEFAULT),
+	PINCFG(KB_COL4_PQ4,            SDMMC3,       UP,     NORMAL,   INPUT,   DEFAULT, DEFAULT),
+	PINCFG(KB_COL5_PQ5,            DEFAULT,      UP,     NORMAL,   INPUT,   DEFAULT, DEFAULT),
+	PINCFG(KB_COL6_PQ6,            DEFAULT,      UP,     NORMAL,   INPUT,   DEFAULT, DEFAULT),
+	PINCFG(KB_COL7_PQ7,            DEFAULT,      UP,     NORMAL,   INPUT,   DEFAULT, DEFAULT),
+	PINCFG(KB_ROW0_PR0,            DEFAULT,      NORMAL, NORMAL,   OUTPUT,  DEFAULT, DEFAULT),
+	PINCFG(KB_ROW1_PR1,            DEFAULT,      NORMAL, NORMAL,   OUTPUT,  DEFAULT, DEFAULT),
+	PINCFG(KB_ROW2_PR2,            DEFAULT,      NORMAL, NORMAL,   OUTPUT,  DEFAULT, DEFAULT),
+	PINCFG(KB_ROW3_PR3,            SYS,          NORMAL, NORMAL,   OUTPUT,  DEFAULT, DEFAULT),
+	PINCFG(KB_ROW4_PR4,            DEFAULT,      UP,     NORMAL,   INPUT,   DEFAULT, DEFAULT),
+	PINCFG(KB_ROW5_PR5,            DEFAULT,      NORMAL, NORMAL,   OUTPUT,  DEFAULT, DEFAULT),
+	PINCFG(KB_ROW6_PR6,            DISPLAYA_ALT, DOWN,   NORMAL,   INPUT,   DEFAULT, DEFAULT),
+	PINCFG(KB_ROW7_PR7,            DEFAULT,      UP,     NORMAL,   INPUT,   DEFAULT, DEFAULT),
+	PINCFG(KB_ROW8_PS0,            DEFAULT,      UP,     NORMAL,   INPUT,   DEFAULT, DEFAULT),
+	PINCFG(KB_ROW9_PS1,            RSVD2,        NORMAL, NORMAL,   OUTPUT,  DEFAULT, DEFAULT),
+	PINCFG(KB_ROW10_PS2,           RSVD2,        UP,     NORMAL,   INPUT,   DEFAULT, DEFAULT),
+	PINCFG(KB_ROW11_PS3,           DEFAULT,      NORMAL, NORMAL,   OUTPUT,  DEFAULT, DEFAULT),
+	PINCFG(KB_ROW12_PS4,           DEFAULT,      NORMAL, NORMAL,   OUTPUT,  DEFAULT, DEFAULT),
+	PINCFG(KB_ROW13_PS5,           DEFAULT,      UP,     NORMAL,   INPUT,   DEFAULT, DEFAULT),
+	PINCFG(KB_ROW14_PS6,           DEFAULT,      NORMAL, NORMAL,   OUTPUT,  DEFAULT, DEFAULT),
+	PINCFG(KB_ROW15_PS7,           SOC,          UP,     NORMAL,   INPUT,   DEFAULT, DEFAULT),
+	PINCFG(KB_ROW16_PT0,           DEFAULT,      NORMAL, NORMAL,   OUTPUT,  DEFAULT, DEFAULT),
+	PINCFG(KB_ROW17_PT1,           DEFAULT,      NORMAL, NORMAL,   OUTPUT,  DEFAULT, DEFAULT),
+	PINCFG(GEN2_I2C_SCL_PT5,       I2C2,         NORMAL, NORMAL,   INPUT,   ENABLE,  DEFAULT),
+	PINCFG(GEN2_I2C_SDA_PT6,       I2C2,         NORMAL, NORMAL,   INPUT,   ENABLE,  DEFAULT),
+	PINCFG(SDMMC4_CMD_PT7,         SDMMC4,       UP,     NORMAL,   INPUT,   DEFAULT, DEFAULT),
+	PINCFG(PU0,                    DEFAULT,      NORMAL, NORMAL,   OUTPUT,  DEFAULT, DEFAULT),
+	PINCFG(PU1,                    DEFAULT,      DOWN,   NORMAL,   INPUT,   DEFAULT, DEFAULT),
+	PINCFG(PU2,                    DEFAULT,      DOWN,   NORMAL,   INPUT,   DEFAULT, DEFAULT),
+	PINCFG(PU3,                    DEFAULT,      NORMAL, NORMAL,   OUTPUT,  DEFAULT, DEFAULT),
+	PINCFG(PU4,                    DEFAULT,      NORMAL, NORMAL,   OUTPUT,  DEFAULT, DEFAULT),
+	PINCFG(PU5,                    DEFAULT,      UP,     NORMAL,   INPUT,   DEFAULT, DEFAULT),
+	PINCFG(PU6,                    DEFAULT,      UP,     NORMAL,   INPUT,   DEFAULT, DEFAULT),
+	PINCFG(PV0,                    DEFAULT,      UP,     NORMAL,   INPUT,   DEFAULT, DEFAULT),
+	PINCFG(PV1,                    DEFAULT,      UP,     NORMAL,   INPUT,   DEFAULT, DEFAULT),
+	PINCFG(SDMMC3_CD_N_PV2,        SDMMC3,       UP,     NORMAL,   INPUT,   DEFAULT, DEFAULT),
+	PINCFG(SDMMC1_WP_N_PV3,        SDMMC1,       DOWN,   TRISTATE, OUTPUT,  DEFAULT, DEFAULT),
+	PINCFG(DDC_SCL_PV4,            I2C4,         NORMAL, NORMAL,   INPUT,   DEFAULT, NORMAL),
+	PINCFG(DDC_SDA_PV5,            I2C4,         NORMAL, NORMAL,   INPUT,   DEFAULT, NORMAL),
+	PINCFG(GPIO_W2_AUD_PW2,        DEFAULT,      UP,     NORMAL,   INPUT,   DEFAULT, DEFAULT),
+	PINCFG(GPIO_W3_AUD_PW3,        DEFAULT,      UP,     NORMAL,   INPUT,   DEFAULT, DEFAULT),
+	PINCFG(DAP_MCLK1_PW4,          EXTPERIPH1,   NORMAL, NORMAL,   OUTPUT,  DEFAULT, DEFAULT),
+	PINCFG(CLK2_OUT_PW5,           EXTPERIPH2,   NORMAL, NORMAL,   OUTPUT,  DEFAULT, DEFAULT),
+	PINCFG(UART3_TXD_PW6,          UARTC,        NORMAL, NORMAL,   OUTPUT,  DEFAULT, DEFAULT),
+	PINCFG(UART3_RXD_PW7,          UARTC,        UP,     NORMAL,   INPUT,   DEFAULT, DEFAULT),
+	PINCFG(DVFS_PWM_PX0,           CLDVFS,       NORMAL, NORMAL,   OUTPUT,  DEFAULT, DEFAULT),
+	PINCFG(GPIO_X1_AUD_PX1,        DEFAULT,      NORMAL, NORMAL,   OUTPUT,  DEFAULT, DEFAULT),
+	PINCFG(DVFS_CLK_PX2,           CLDVFS,       NORMAL, NORMAL,   OUTPUT,  DEFAULT, DEFAULT),
+	PINCFG(GPIO_X3_AUD_PX3,        DEFAULT,      UP,     NORMAL,   INPUT,   DEFAULT, DEFAULT),
+	PINCFG(GPIO_X4_AUD_PX4,        DEFAULT,      NORMAL, NORMAL,   OUTPUT,  DEFAULT, DEFAULT),
+	PINCFG(GPIO_X5_AUD_PX5,        DEFAULT,      UP,     NORMAL,   INPUT,   DEFAULT, DEFAULT),
+	PINCFG(GPIO_X6_AUD_PX6,        DEFAULT,      UP,     NORMAL,   INPUT,   DEFAULT, DEFAULT),
+	PINCFG(GPIO_X7_AUD_PX7,        DEFAULT,      NORMAL, NORMAL,   OUTPUT,  DEFAULT, DEFAULT),
+	PINCFG(ULPI_CLK_PY0,           SPI1,         NORMAL, NORMAL,   OUTPUT,  DEFAULT, DEFAULT),
+	PINCFG(ULPI_DIR_PY1,           SPI1,         DOWN,   NORMAL,   INPUT,   DEFAULT, DEFAULT),
+	PINCFG(ULPI_NXT_PY2,           SPI1,         NORMAL, NORMAL,   OUTPUT,  DEFAULT, DEFAULT),
+	PINCFG(ULPI_STP_PY3,           SPI1,         NORMAL, NORMAL,   OUTPUT,  DEFAULT, DEFAULT),
+	PINCFG(SDMMC1_DAT3_PY4,        SDMMC1,       UP,     NORMAL,   INPUT,   DEFAULT, DEFAULT),
+	PINCFG(SDMMC1_DAT2_PY5,        SDMMC1,       UP,     NORMAL,   INPUT,   DEFAULT, DEFAULT),
+	PINCFG(SDMMC1_DAT1_PY6,        SDMMC1,       UP,     NORMAL,   INPUT,   DEFAULT, DEFAULT),
+	PINCFG(SDMMC1_DAT0_PY7,        SDMMC1,       UP,     NORMAL,   INPUT,   DEFAULT, DEFAULT),
+	PINCFG(SDMMC1_CLK_PZ0,         SDMMC1,       NORMAL, NORMAL,   INPUT,   DEFAULT, DEFAULT),
+	PINCFG(SDMMC1_CMD_PZ1,         SDMMC1,       UP,     NORMAL,   INPUT,   DEFAULT, DEFAULT),
+	PINCFG(PWR_I2C_SCL_PZ6,        I2CPWR,       NORMAL, NORMAL,   INPUT,   ENABLE,  DEFAULT),
+	PINCFG(PWR_I2C_SDA_PZ7,        I2CPWR,       NORMAL, NORMAL,   INPUT,   ENABLE,  DEFAULT),
+	PINCFG(SDMMC4_DAT0_PAA0,       SDMMC4,       UP,     NORMAL,   INPUT,   DEFAULT, DEFAULT),
+	PINCFG(SDMMC4_DAT1_PAA1,       SDMMC4,       UP,     NORMAL,   INPUT,   DEFAULT, DEFAULT),
+	PINCFG(SDMMC4_DAT2_PAA2,       SDMMC4,       UP,     NORMAL,   INPUT,   DEFAULT, DEFAULT),
+	PINCFG(SDMMC4_DAT3_PAA3,       SDMMC4,       UP,     NORMAL,   INPUT,   DEFAULT, DEFAULT),
+	PINCFG(SDMMC4_DAT4_PAA4,       SDMMC4,       UP,     NORMAL,   INPUT,   DEFAULT, DEFAULT),
+	PINCFG(SDMMC4_DAT5_PAA5,       SDMMC4,       UP,     NORMAL,   INPUT,   DEFAULT, DEFAULT),
+	PINCFG(SDMMC4_DAT6_PAA6,       SDMMC4,       UP,     NORMAL,   INPUT,   DEFAULT, DEFAULT),
+	PINCFG(SDMMC4_DAT7_PAA7,       SDMMC4,       UP,     NORMAL,   INPUT,   DEFAULT, DEFAULT),
+	PINCFG(PBB0,                   VIMCLK2_ALT,  NORMAL, NORMAL,   OUTPUT,  DEFAULT, DEFAULT),
+	PINCFG(CAM_I2C_SCL_PBB1,       I2C3,         NORMAL, NORMAL,   INPUT,   ENABLE,  DEFAULT),
+	PINCFG(CAM_I2C_SDA_PBB2,       I2C3,         NORMAL, NORMAL,   INPUT,   ENABLE,  DEFAULT),
+	PINCFG(PBB3,                   DEFAULT,      NORMAL, NORMAL,   OUTPUT,  DEFAULT, DEFAULT),
+	PINCFG(PBB4,                   VGP4,         NORMAL, NORMAL,   OUTPUT,  DEFAULT, DEFAULT),
+	PINCFG(PBB5,                   DEFAULT,      NORMAL, NORMAL,   OUTPUT,  DEFAULT, DEFAULT),
+	PINCFG(PBB6,                   DEFAULT,      NORMAL, NORMAL,   OUTPUT,  DEFAULT, DEFAULT),
+	PINCFG(PBB7,                   DEFAULT,      NORMAL, NORMAL,   OUTPUT,  DEFAULT, DEFAULT),
+	PINCFG(CAM_MCLK_PCC0,          VI_ALT3,      NORMAL, NORMAL,   OUTPUT,  DEFAULT, DEFAULT),
+	PINCFG(PCC1,                   DEFAULT,      DOWN,   NORMAL,   INPUT,   DEFAULT, DEFAULT),
+	PINCFG(PCC2,                   DEFAULT,      DOWN,   NORMAL,   INPUT,   DEFAULT, DEFAULT),
+	PINCFG(SDMMC4_CLK_PCC4,        SDMMC4,       NORMAL, NORMAL,   INPUT,   DEFAULT, DEFAULT),
+	PINCFG(CLK2_REQ_PCC5,          DEFAULT,      NORMAL, NORMAL,   OUTPUT,  DEFAULT, DEFAULT),
+	PINCFG(PEX_L0_RST_N_PDD1,      PE0,          NORMAL, NORMAL,   OUTPUT,  DEFAULT, DEFAULT),
+	PINCFG(PEX_L0_CLKREQ_N_PDD2,   PE0,          UP,     NORMAL,   INPUT,   DEFAULT, DEFAULT),
+	PINCFG(PEX_WAKE_N_PDD3,        PE,           UP,     NORMAL,   INPUT,   DEFAULT, DEFAULT),
+	PINCFG(PEX_L1_RST_N_PDD5,      PE1,          NORMAL, NORMAL,   OUTPUT,  DEFAULT, DEFAULT),
+	PINCFG(PEX_L1_CLKREQ_N_PDD6,   PE1,          UP,     NORMAL,   INPUT,   DEFAULT, DEFAULT),
+	PINCFG(CLK3_OUT_PEE0,          EXTPERIPH3,   NORMAL, NORMAL,   OUTPUT,  DEFAULT, DEFAULT),
+	PINCFG(CLK3_REQ_PEE1,          DEFAULT,      NORMAL, NORMAL,   OUTPUT,  DEFAULT, DEFAULT),
+	PINCFG(DAP_MCLK1_REQ_PEE2,     SATA,         NORMAL, NORMAL,   OUTPUT,  DEFAULT, DEFAULT),
+	PINCFG(HDMI_CEC_PEE3,          CEC,          NORMAL, NORMAL,   INPUT,   ENABLE,  DEFAULT),
+	PINCFG(SDMMC3_CLK_LB_OUT_PEE4, SDMMC3,       UP,     NORMAL,   INPUT,   DEFAULT, DEFAULT),
+	PINCFG(SDMMC3_CLK_LB_IN_PEE5,  SDMMC3,       UP,     NORMAL,   INPUT,   DEFAULT, DEFAULT),
+	PINCFG(DP_HPD_PFF0,            DP,           UP,     NORMAL,   INPUT,   DEFAULT, DEFAULT),
+	PINCFG(USB_VBUS_EN2_PFF1,      USB,          UP,     NORMAL,   INPUT,   ENABLE,  DEFAULT),
+	PINCFG(PFF2,                   DEFAULT,      UP,     NORMAL,   INPUT,   DISABLE, DEFAULT),
+	PINCFG(CORE_PWR_REQ,           PWRON,        NORMAL, NORMAL,   OUTPUT,  DEFAULT, DEFAULT),
+	PINCFG(CPU_PWR_REQ,            RSVD2,        NORMAL, NORMAL,   OUTPUT,  DEFAULT, DEFAULT),
+	PINCFG(PWR_INT_N,              PMI,          UP,     NORMAL,   INPUT,   DEFAULT, DEFAULT),
+	PINCFG(RESET_OUT_N,            RESET_OUT_N,  NORMAL, NORMAL,   OUTPUT,  DEFAULT, DEFAULT),
+	PINCFG(OWR,                    RSVD2,        DOWN,   TRISTATE, OUTPUT,  DEFAULT, NORMAL),
+	PINCFG(CLK_32K_IN,             RSVD2,        NORMAL, NORMAL,   INPUT,   DEFAULT, DEFAULT),
+	PINCFG(JTAG_RTCK,              RTCK,         UP,     NORMAL,   OUTPUT,  DEFAULT, DEFAULT),
+};
+
+#define DRVCFG(_drvgrp, _slwf, _slwr, _drvup, _drvdn, _lpmd, _schmt, _hsm) \
+	{						\
+		.drvgrp = PMUX_DRVGRP_##_drvgrp,	\
+		.slwf   = _slwf,			\
+		.slwr   = _slwr,			\
+		.drvup  = _drvup,			\
+		.drvdn  = _drvdn,			\
+		.lpmd   = PMUX_LPMD_##_lpmd,		\
+		.schmt  = PMUX_SCHMT_##_schmt,		\
+		.hsm    = PMUX_HSM_##_hsm,		\
+	}
+
+static const struct pmux_drvgrp_config meerkat_drvgrps[] = {
+};
+
+#endif /* PINMUX_CONFIG_MEERKAT_H */
diff --git a/board/avionic-design/kein-baseboard/Kconfig b/board/avionic-design/kein-baseboard/Kconfig
new file mode 100644
index 0000000..a185a54
--- /dev/null
+++ b/board/avionic-design/kein-baseboard/Kconfig
@@ -0,0 +1,15 @@
+if TARGET_KEIN_BASEBOARD
+
+config SYS_BOARD
+	string
+	default "kein-baseboard"
+
+config SYS_VENDOR
+	string
+	default "avionic-design"
+
+config SYS_CONFIG_NAME
+	string
+	default "kein-baseboard"
+
+endif
diff --git a/board/avionic-design/kein-baseboard/MAINTAINERS b/board/avionic-design/kein-baseboard/MAINTAINERS
new file mode 100644
index 0000000..4fa20a9
--- /dev/null
+++ b/board/avionic-design/kein-baseboard/MAINTAINERS
@@ -0,0 +1,7 @@
+Kein Baseboard
+M:	Julian Scheel <julian at jusst.de>
+M:	Alban Bedel <alban.bedel at avionic-design.de>
+S:	Maintained
+F:	board/avionic-design/kein-baseboard
+F:	include/configs/kein-baseboard.h
+F:	configs/kein-baseboard_defconfig
diff --git a/board/avionic-design/kein-baseboard/Makefile b/board/avionic-design/kein-baseboard/Makefile
new file mode 100644
index 0000000..59760f6
--- /dev/null
+++ b/board/avionic-design/kein-baseboard/Makefile
@@ -0,0 +1,9 @@
+#
+# (C) Copyright 2015
+# Avionic Design GmbH <www.avionic-design.de>
+#
+# SPDX-License-Identifier:      GPL-2.0+
+#
+
+obj-y	+= ../../nvidia/venice2/as3722_init.o
+obj-y	+= ../common/meerkat.o
diff --git a/configs/kein-baseboard_defconfig b/configs/kein-baseboard_defconfig
new file mode 100644
index 0000000..8c9b422
--- /dev/null
+++ b/configs/kein-baseboard_defconfig
@@ -0,0 +1,21 @@
+CONFIG_ARM=y
+CONFIG_TEGRA=y
+CONFIG_SPL_DM=y
+CONFIG_TEGRA124=y
+CONFIG_TARGET_KEIN_BASEBOARD=y
+CONFIG_DEFAULT_DEVICE_TREE="tegra124-kein-baseboard"
+CONFIG_FIT=y
+CONFIG_FIT_SIGNATURE=y
+CONFIG_SYS_PROMPT="Tegra124 (kein-baseboard) # "
+# CONFIG_CMD_IMLS is not set
+# CONFIG_CMD_FLASH is not set
+# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_GPIO=y
+# CONFIG_CMD_SETEXPR is not set
+# CONFIG_CMD_NFS is not set
+CONFIG_PCI_TEGRA=y
+CONFIG_SYS_NS16550=y
+CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_USB_GADGET=y
+CONFIG_USE_PRIVATE_LIBGCC=y
diff --git a/include/configs/kein-baseboard.h b/include/configs/kein-baseboard.h
new file mode 100644
index 0000000..16b8901
--- /dev/null
+++ b/include/configs/kein-baseboard.h
@@ -0,0 +1,71 @@
+/*
+ * (C) Copyright 2014-2016 Avionic Design GmbH
+ *
+ * SPDX-License-Identifier:     GPL-2.0
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include <linux/sizes.h>
+
+/* enable PMIC */
+#define CONFIG_AS3722_POWER
+
+#include "tegra124-common.h"
+
+/* High-level configuration options */
+#define CONFIG_TEGRA_BOARD_STRING	"Avionic-Design Kein Baseboard"
+
+/* Board-specific serial config */
+#define CONFIG_TEGRA_ENABLE_UARTD
+#define CONFIG_SYS_NS16550_COM1		NV_PA_APB_UARTD_BASE
+
+/* I2C */
+#define CONFIG_SYS_I2C_TEGRA
+#define CONFIG_CMD_I2C
+
+/* SD/MMC */
+#define CONFIG_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_TEGRA_MMC
+#define CONFIG_CMD_MMC
+#define CONFIG_CMD_GPT
+#define CONFIG_RANDOM_UUID
+
+/* Environment in eMMC, at the end of 2nd "boot sector" */
+#define CONFIG_ENV_IS_IN_MMC
+#define CONFIG_ENV_OFFSET		(-CONFIG_ENV_SIZE)
+#define CONFIG_SYS_MMC_ENV_DEV		0
+#define CONFIG_SYS_MMC_ENV_PART		2
+
+/* USB Host support */
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_TEGRA
+#define CONFIG_USB_STORAGE
+#define CONFIG_CMD_USB
+
+/* USB networking support */
+#define CONFIG_USB_HOST_ETHER
+#define CONFIG_USB_ETHER_RNDIS
+#define CONFIG_USB_ETHER_ASIX
+#define CONFIG_USB_ETHER_MCS7830
+#define CONFIG_USB_ETHER_SMSC95XX
+
+/* PCI host support */
+#define CONFIG_PCI
+#define CONFIG_PCI_PNP
+#define CONFIG_CMD_PCI
+
+/* General networking support */
+#define CONFIG_CMD_DHCP
+
+#include "tegra-common-usb-gadget.h"
+#include "tegra-common-post.h"
+
+#define CONFIG_ARMV7_PSCI			1
+/* Reserve top 1M for secure RAM */
+#define CONFIG_ARMV7_SECURE_BASE		0xfff00000
+#define CONFIG_ARMV7_SECURE_RESERVE_SIZE	0x00100000
+
+#endif /* __CONFIG_H */
-- 
2.8.0





More information about the U-Boot mailing list