[U-Boot] [U-Boot, 2/2] board: atmel: add SAMA5D2 PTC Engineering board

[Andreas Bießmann]

On Fri, Feb 26, 2016 at 05:20:26PM +0800, Wenyou Yang wrote:
> The board supports following features:
>  - Boot media support: NAND Flash/SPI Flash
>  - Support ethernet
>  - Support USB mass storage
> 
> Signed-off-by: Wenyou Yang <wenyou.yang at atmel.com>


Reviewed-by: Andreas Bießmann <andreas at biessmann.org>

> ---
> 
>  arch/arm/mach-at91/Kconfig              |    6 +
>  board/atmel/sama5d2_ptc/Kconfig         |   15 ++
>  board/atmel/sama5d2_ptc/MAINTAINERS     |    7 +
>  board/atmel/sama5d2_ptc/Makefile        |    8 +
>  board/atmel/sama5d2_ptc/sama5d2_ptc.c   |  285 +++++++++++++++++++++++++++++++
>  configs/sama5d2_ptc_nandflash_defconfig |   12 ++
>  configs/sama5d2_ptc_spiflash_defconfig  |   12 ++
>  include/configs/sama5d2_ptc.h           |  155 +++++++++++++++++
>  8 files changed, 500 insertions(+)
>  create mode 100644 board/atmel/sama5d2_ptc/Kconfig
>  create mode 100644 board/atmel/sama5d2_ptc/MAINTAINERS
>  create mode 100644 board/atmel/sama5d2_ptc/Makefile
>  create mode 100644 board/atmel/sama5d2_ptc/sama5d2_ptc.c
>  create mode 100644 configs/sama5d2_ptc_nandflash_defconfig
>  create mode 100644 configs/sama5d2_ptc_spiflash_defconfig
>  create mode 100644 include/configs/sama5d2_ptc.h