[U-Boot] [PULL] u-boot-atmel/master -> u-boot/master

[Andreas Bießmann]

Hi Tom,

On 2016-05-03 14:13, Tom Rini wrote:
> On Tue, May 03, 2016 at 01:35:07PM +0200, Andreas Bießmann wrote:
> 
>> Hi Tom,
>> 
>> here are some fixes for sama5d2 and a new sama5d2 board for 2016.05.
>> 
>> The following changes since commit 
>> 58abb988ce24525474f0d515d2a36c1b3acf893f:
>> 
>>   mx6ul_evk: Remove CONFIG_SUPPORT_EMMC_BOOT (2016-05-02 21:04:36 
>> -0400)
>> 
>> are available in the git repository at:
>> 
>>   git://git.denx.de/u-boot-atmel.git master
>> 
>> for you to fetch changes up to 
>> 0b5940e2b24043a7f4c07cca4b11a13522063e02:
>> 
>>   ARM: sama5d2: Implement boot device autodetection (2016-05-03 
>> 13:31:28 +0200)
>> 
>> ----------------------------------------------------------------
>> Marek Vasut (2):
>>       ARM: atmel: Enable FIT image support for SAMA5Dx
>>       ARM: sama5d2: Implement boot device autodetection
>> 
>> Wenyou Yang (6):
>>       ARM: at91: sama5d2: add macro & field definitions
>>       board: atmel: add SAMA5D2 PTC Engineering board
>>       board: atmel: sama5d2_xplained: fix the missing pin config of 
>> SDMMC0
>>       ARM: at91: clock: fix the GCK's clock source
>>       ARM: at91: clock: complete the GCK's clock sources
>>       board: sama5d2_xplained: change SDHCI GCK's clock source to UPLL
> 
> We're less than a week out from release.  Are any of these important
> bugfixes that can't wait?  Thanks!

As I understand these are fixes to get the MMC working in U-Boot and 
make the config aligned to Linux:

* board: atmel: sama5d2_xplained: fix the missing pin config of SDMMC0
* ARM: at91: clock: fix the GCK's clock source
* ARM: at91: clock: complete the GCK's clock sources
* board: sama5d2_xplained: change SDHCI GCK's clock source to UPLL

But I do not own such a board and could not test the state before nor 
after.

You'r right, it is really late for this release. So lets shift it to the 
next one unless Wenyou says that that board is unusable without this 
fix. If so I could prepare another pull request with just the required 
patches.

Is that ok for you?

Andreas