[U-Boot] Pull request: u-boot-net.git master
Joe Hershberger
joe.hershberger at ni.com
Tue May 3 22:01:10 CEST 2016
Hi Tom,
I left out my semantic patch changes for now since spatch does not generate
well-formatted multi-line function definitions. I'm looking into improving the
tool, but ocaml is not a language that I'm familiar with.
The following changes since commit e7fbcbc2566ab4bbcb07889a5791972ac49fa407:
igep00x0: Use the SRAM available for SPL. (2016-05-03 12:17:13 -0400)
are available in the git repository at:
git://git.denx.de/u-boot-net.git master
for you to fetch changes up to f0973c9e75deddbde92b6e18187d1ee9b814cf5c:
net: phy: dp83867: Add SGMII helper for configuration (2016-05-03 14:39:35 -0500)
----------------------------------------------------------------
Dan Murphy (7):
drivers: net: cpsw: Add reading of DT phy-handle node
net: zynq_gem: Add the passing of the phy-handle node
net: phy: dp83867: Add device tree bindings and documentation
net: phy: ti: Allow the driver to be more configurable
net: phy: Move is_rgmii helper to phy.h
net: phy: Add phy_interface_is_sgmii to phy.h
net: phy: dp83867: Add SGMII helper for configuration
Kevin Smith (2):
net: Remove unused mv88e61xx switch driver
net: phy: Add PHY driver for mv88e61xx switches
Lev Iserovich (1):
fdt: fix setting MAC addresses for multiple interfaces
Mugunthan V N (12):
drivers: core: device: add support to check dt compatible for a device/machine
ti_omap5_common: eth: do not define DM_ETH for spl
drivers: net: cpsw: fix cpsw dp parse when num slaves as 1
ARM: omap5: add platform specific ethernet phy modes configurations
drivers: net: cpsw: fix get mdio base and gmii_sel reg from DT
drivers: net: cpsw: add support for reading mac address from efuse
arm: dts: am4372: add syscon node to cpsw to read mac address
arm: dts: dra7: add syscon node to cpsw to read mac address
arm: dts: dra7: fix ethernet name with proper device address
defconfig: am437x_gp_evm: enable eth driver model
defconfig: am437x_sk_evm: enable eth driver model
defconfig: dra74_evm: enable eth driver model
Prabhakar Kushwaha (1):
drivers: net: ldpaa: Memset pools_params as "0" before use
Stefan Agner (2):
net: fix vlan validation
net: increase maximum frame size to accomediate VLAN packets
arch/arm/dts/am4372.dtsi | 1 +
arch/arm/dts/dra7.dtsi | 3 +-
arch/arm/include/asm/arch-omap5/cpu.h | 12 +
common/fdt_support.c | 20 +-
configs/am437x_gp_evm_defconfig | 1 +
configs/am437x_sk_evm_defconfig | 1 +
configs/dra74_evm_defconfig | 1 +
doc/device-tree-bindings/net/ti,dp83867.txt | 25 +
drivers/core/device.c | 14 +
drivers/net/Makefile | 2 +-
drivers/net/cpsw-common.c | 121 +++
drivers/net/cpsw.c | 77 +-
drivers/net/ldpaa_eth/ldpaa_eth.c | 1 +
drivers/net/phy/mv88e61xx.c | 1322 ++++++++++++++++++---------
drivers/net/phy/mv88e61xx.h | 61 --
drivers/net/phy/phy.c | 3 +
drivers/net/phy/ti.c | 88 +-
drivers/net/zynq_gem.c | 15 +-
include/configs/ti_omap5_common.h | 1 +
include/cpsw.h | 2 +
include/dm/device.h | 23 +
include/dt-bindings/net/ti-dp83867.h | 35 +
include/env_flags.h | 4 +-
include/net.h | 16 +-
include/netdev.h | 58 --
include/phy.h | 23 +
26 files changed, 1322 insertions(+), 608 deletions(-)
create mode 100644 doc/device-tree-bindings/net/ti,dp83867.txt
create mode 100644 drivers/net/cpsw-common.c
delete mode 100644 drivers/net/phy/mv88e61xx.h
create mode 100644 include/dt-bindings/net/ti-dp83867.h
Thanks!
-Joe
More information about the U-Boot
mailing list