[U-Boot] [PATCH 7/7] usb: hub: Increase the query delay

Stefan Roese sr at denx.de
Wed May 4 10:07:40 CEST 2016


On 03.05.2016 22:51, Marek Vasut wrote:
> Increase the query delay, otherwise some sticks are not detected.
> The problem shows up on the USB bus analyzer such that the stick
> takes longer time to switch from FS mode to HS mode than the code
> allows.
>
> Signed-off-by: Marek Vasut <marex at denx.de>
> Cc: Chin Liang See <clsee at altera.com>
> Cc: Dinh Nguyen <dinguyen at opensource.altera.com>
> Cc: Hans de Goede <hdegoede at redhat.com>
> Cc: Stefan Roese <sr at denx.de>
> Cc: Stephen Warren <swarren at nvidia.com>
> ---
>   common/usb_hub.c | 2 +-
>   1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/common/usb_hub.c b/common/usb_hub.c
> index 0f39c9f..6cd274a 100644
> --- a/common/usb_hub.c
> +++ b/common/usb_hub.c
> @@ -145,7 +145,7 @@ static void usb_hub_power_on(struct usb_hub_device *hub)
>   	 * Do a minimum delay of the larger value of 100ms or pgood_delay
>   	 * so that the power can stablize before the devices are queried
>   	 */
> -	hub->query_delay = get_timer(0) + max(100, (int)pgood_delay);
> +	hub->query_delay = get_timer(0) + max(1000, (int)pgood_delay);
>
>   	/*
>   	 * Record the power-on timeout here. The max. delay (timeout)
>

We have touched this part of the delay a number of times in my
USB scanning patch series. I've integrated all very valuable
suggestions from Stephen and Hans and I'm pretty sure that the
current implementation is aligned with the USB spec. And tested
successfully one multiple platforms without regression.
Stephen did some tests on Tegra and Hans on sunxi. I tested
mainly on x86. But I now also tested on Armada XP (see
below).

As mentioned before, the current version causes no problems with
all my USB sticks on the congatec x86 board. Even the 2 ones that
are problematic when connected to the SoCFPGA. They are detected
without any issues on this board. Thats why I assume, that the
real problem here is the DWC driver and not the generic USB
handling code. My feeling is that increasing this initial delay
(before the scanning starts) just papers over the real problem
most likely hidden somewhere in the DWC driver. This is just
a feeling though which I can't prove somehow other than testing
the common USB code on different platforms. And I really have
no deeper knowledge of the DWC driver to manifest this feeling
or even fix this potential problem there.

I've already mentioned this in another mail. My suggestion for
SoCFPGA boards that need to use these problematic USB keys is
to use the already available solution to set "usb_pgood_delay"
to 1000. This effectively does the same as this patch. Without
implying this general 1 second delay per hub (!!!) to all other
platforms that use USB in U-Boot.

To test my suspicions about this being a DWC (SoCFPGA?) only
problem, I've also tested all my current USB sticks including
the 2 problematic ones (on SoCrates) on another ARM platform
(additionally to all my test on x86). I've used the Marvell
Armada XP development board (db-mv784mp-gp) for this. And all
USB sticks are detected without any problems on this platform.

As a result of all this, I would like to have this patch not
applied. As it negatively touches the common USB code to fix
(paper over?) a problem only seen on one platform (AFAIK). And
we already have the solution of this "usb_pgood_delay" that
can be used on SoCFPGA. To manifest this, here again the
numbers for the USB scanning time on x86, without and with
this patch:

Without this patch:
starting USB...
USB0:   USB EHCI 1.00
scanning bus 0 for devices... 9 USB Device(s) found

time: 1.940 seconds

With this patch:
=> time usb start
starting USB...
USB0:   USB EHCI 1.00
scanning bus 0 for devices... 9 USB Device(s) found

time: 5.421 seconds

Thanks,
Stefan


More information about the U-Boot mailing list