[U-Boot] [PATCH 6/6] Pine64: rename defconfig

[Peter Robinson]

On Wed, May 4, 2016 at 10:15 PM, Andre Przywara <andre.przywara at arm.com> wrote:
> Rename the defconfig file for the Pine64 from pine64_plus_defconfig to
> pine64_defconfig.
> The differences between the two versions (more RAM and a different
> Ethernet PHY) don't justify two board versions, so lets stick with the
> generic name and try to differentiate between the versions at runtime
> if this is needed later.
>
> Signed-off-by: Andre Przywara <andre.przywara at arm.com>
> ---
>  configs/pine64_defconfig      | 20 ++++++++++++++++++++
>  configs/pine64_plus_defconfig | 20 --------------------
>  2 files changed, 20 insertions(+), 20 deletions(-)
>  create mode 100644 configs/pine64_defconfig
>  delete mode 100644 configs/pine64_plus_defconfig
>
> diff --git a/configs/pine64_defconfig b/configs/pine64_defconfig
> new file mode 100644
> index 0000000..0977334
> --- /dev/null
> +++ b/configs/pine64_defconfig
> @@ -0,0 +1,20 @@
> +CONFIG_ARM=y
> +CONFIG_ARCH_SUNXI=y
> +CONFIG_MACH_SUN50I=y
> +CONFIG_DRAM_CLK=672
> +CONFIG_DRAM_ZQ=3881915
> +# CONFIG_VIDEO is not set
> +CONFIG_DEFAULT_DEVICE_TREE="sun50i-a64-pine64-plus"

If you're building a single u-boot for all variants of Pine64,
something which I'd prefer, I don't think we can just set a default
but rather need some logic to specify the DT name based on which board
is booting. This is done for example in the BeagleBone config to
detect the various variants of the BeagleBones.

Peter

> +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
> +CONFIG_HUSH_PARSER=y
> +# CONFIG_CMD_IMLS is not set
> +# CONFIG_CMD_FLASH is not set
> +CONFIG_CMD_MMC=y
> +# CONFIG_CMD_FPGA is not set
> +CONFIG_CMD_DHCP=y
> +CONFIG_CMD_MII=y
> +CONFIG_CMD_PING=y
> +CONFIG_CMD_EXT2=y
> +CONFIG_CMD_EXT4=y
> +CONFIG_CMD_FAT=y
> +CONFIG_CMD_FS_GENERIC=y
> diff --git a/configs/pine64_plus_defconfig b/configs/pine64_plus_defconfig
> deleted file mode 100644
> index 0977334..0000000
> --- a/configs/pine64_plus_defconfig
> +++ /dev/null
> @@ -1,20 +0,0 @@
> -CONFIG_ARM=y
> -CONFIG_ARCH_SUNXI=y
> -CONFIG_MACH_SUN50I=y
> -CONFIG_DRAM_CLK=672
> -CONFIG_DRAM_ZQ=3881915
> -# CONFIG_VIDEO is not set
> -CONFIG_DEFAULT_DEVICE_TREE="sun50i-a64-pine64-plus"
> -# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
> -CONFIG_HUSH_PARSER=y
> -# CONFIG_CMD_IMLS is not set
> -# CONFIG_CMD_FLASH is not set
> -CONFIG_CMD_MMC=y
> -# CONFIG_CMD_FPGA is not set
> -CONFIG_CMD_DHCP=y
> -CONFIG_CMD_MII=y
> -CONFIG_CMD_PING=y
> -CONFIG_CMD_EXT2=y
> -CONFIG_CMD_EXT4=y
> -CONFIG_CMD_FAT=y
> -CONFIG_CMD_FS_GENERIC=y
> --
> 2.7.3
>
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot