[U-Boot] [PATCH 4/7] usb: Wait after sending Set Configuration request

[Chin Liang See]

On Wed, 2016-05-04 at 12:00 +0200, Stefan Roese wrote:
> On 04.05.2016 11:45, Chin Liang See wrote:
> > On Wed, 2016-05-04 at 09:41 +0200, Stefan Roese wrote:
> > > On 03.05.2016 22:51, Marek Vasut wrote:
> > > > Some devices, like the SanDisk Cruzer Pop need some time to
> > > > process
> > > > the Set Configuration request, so wait a little until they are
> > > > ready.
> > > > 
> > > > Signed-off-by: Marek Vasut <marex at denx.de>
> > > > Cc: Chin Liang See <clsee at altera.com>
> > > > Cc: Dinh Nguyen <dinguyen at opensource.altera.com>
> > > > Cc: Hans de Goede <hdegoede at redhat.com>
> > > > Cc: Stefan Roese <sr at denx.de>
> > > > Cc: Stephen Warren <swarren at nvidia.com>
> > > > ---
> > > >    common/usb.c | 8 ++++++++
> > > >    1 file changed, 8 insertions(+)
> > > > 
> > > > diff --git a/common/usb.c b/common/usb.c
> > > > index 63429d4..205041b 100644
> > > > --- a/common/usb.c
> > > > +++ b/common/usb.c
> > > > @@ -1107,6 +1107,14 @@ int usb_select_config(struct usb_device
> > > > *dev)
> > > >    			"len %d, status %lX\n", dev
> > > > ->act_len, dev
> > > > ->status);
> > > >    		return err;
> > > >    	}
> > > > +
> > > > +	/*
> > > > +	 * Wait until the Set Configuration request gets
> > > > processed
> > > > by the
> > > > +	 * device. This is required by at least SanDisk Cruzer
> > > > Pop
> > > > USB 2.0
> > > > +	 * and Kingston DT Ultimate 32GB USB 3.0 on DWC2 OTG
> > > > controller.
> > > > +	 */
> > > > +	mdelay(10);
> > > > +
> > > >    	debug("new device strings: Mfr=%d, Product=%d,
> > > > SerialNumber=%d\n",
> > > >    	      dev->descriptor.iManufacturer, dev
> > > > ->descriptor.iProduct,
> > > >    	      dev->descriptor.iSerialNumber);
> > > > 
> > > 
> > > As you might have expected, I'm not a fan of adding new delays to
> > > the common USB code. As this negatively affects all platforms.
> > > Did
> > > you test these two sticks that require this delay on other
> > > platforms
> > > than SoCFPGA? I would be very interested to know, if these keys
> > > are
> > > successfully detected without this patch on other platforms. I
> > > don't have access to these USB keys, so I can't test it on my
> > > platforms.
> > > 
> > 
> > Actually this series of patches (include the delay) help for all my
> > problematic pen drives too. It sound to me these pen drives need
> > time
> > to process.
> 
> This delay (I'm talking mainly about the 1000ms delay per USB hub
> in patch 7/7) does not seem to be necessary on other platforms.
> 
> Chin, could you please test again without this patch 7/7 but
> with "usb_pgood_delay" set to 1000? And let us know if this
> also fixes all the problems with your problematic pen drives?
> That would be very helpful.
> 

Yup, it works for my problematic pen drives. This apply to both with
and without setting the usb_pgood_delay to 1000.

Thanks
Chin Liang

> Thanks,
> Stefan