[U-Boot] [PATCH 07/18] net: macb: Convert to driver model

[Yang, Wenyou]

Hi Simon,

> -----Original Message-----
> From: sjg at google.com [mailto:sjg at google.com] On Behalf Of Simon Glass
> Sent: 2016年5月5日 10:38
> To: Yang, Wenyou <Wenyou.Yang at atmel.com>
> Cc: hs at denx.de; U-Boot Mailing List <u-boot at lists.denx.de>; Joe Hershberger
> <joe.hershberger at ni.com>
> Subject: Re: [U-Boot] [PATCH 07/18] net: macb: Convert to driver model
> 
> Hi,
> 
> On 4 May 2016 at 01:32, Yang, Wenyou <Wenyou.Yang at atmel.com> wrote:
> >
> > Hi
> >
> > > -----Original Message-----
> > > From: U-Boot [mailto:u-boot-bounces at lists.denx.de] On Behalf Of
> > > Heiko Schocher
> > > Sent: 2016年5月3日 15:54
> > > To: Simon Glass <sjg at chromium.org>
> > > Cc: U-Boot Mailing List <u-boot at lists.denx.de>; Joe Hershberger
> > > <joe.hershberger at ni.com>
> > > Subject: Re: [U-Boot] [PATCH 07/18] net: macb: Convert to driver
> > > model
> > >
> > > Hello Simon,
> > >
> > > Am 03.05.2016 um 08:40 schrieb Simon Glass:
> > > > Add driver-model support to this driver. The old code remains for
> > > > now so that we can convert boards one at a time.
> > > >
> > > > Signed-off-by: Simon Glass <sjg at chromium.org>
> > > > ---
> > > >
> > > >   drivers/net/macb.c | 119
> > > +++++++++++++++++++++++++++++++++++++++++++++++++++++
> > > >   1 file changed, 119 insertions(+)
> > >
> > > Thanks!
> > >
> > > Reviewed-by: Heiko Schocher <hs at denx.de>
> > >
> > > tested on the smartweb, corvus, taurus and axm board
> > >
> > > Tested-by: Heiko Schocher <hs at denx.de>
> >
> > I tried to test this patch series on SAMA5D2 Xplained board, but I have the
> compile warning below. Did you experience it?
> >
> > ---8<---------
> > drivers/net/macb.c: In function 'macb_phy_init':
> > drivers/net/macb.c:487:9: warning: passing argument 3 of 'phy_connect'
> > from incompatible pointer type [enabled by default] In file included from
> include/miiphy.h:22:0,
> >                  from drivers/net/macb.c:36:
> > include/phy.h:226:20: note: expected 'struct udevice *' but argument is of type
> 'const struct device **'
> > --->8--------
> 
> No I don't see that problem. I did a full build test. What is the board config name
> you are using?

The board is SAMA5D2 Xplained board, the .config file is attached.

I noticed that in include/phy.h file,  phy_connect() has different prototype for enabling CONFIG_DM_ETH or not.

So, I think this issue should be exist.

> >
> > Thanks.
> >
> > >
> > > bye,
> > > Heiko
> > > --
> > > DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
> > > HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell,
> > > Germany _______________________________________________
> > > U-Boot mailing list
> > > U-Boot at lists.denx.de
> > > http://lists.denx.de/mailman/listinfo/u-boot
> >
> >
> > Best Regards,
> > Wenyou Yang
> 
> Regards,
> Simon


Best Regards,
Wenyou Yang
-------------- next part --------------
A non-text attachment was scrubbed...
Name: config.gz
Type: application/x-gzip
Size: 3464 bytes
Desc: config.gz
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20160505/9855d223/attachment.bin>