[U-Boot] [PATCH 07/18] net: macb: Convert to driver model

[Yang, Wenyou]

Hi,

On 2016/5/5 11:18, Simon Glass wrote:
>
> Hi,
>
> On May 4, 2016 21:15, "Yang, Wenyou" <Wenyou.Yang at atmel.com 
> <mailto:Wenyou.Yang at atmel.com>> wrote:
> >
> > Hi Simon,
> >
> > > -----Original Message-----
> > > From: sjg at google.com <mailto:sjg at google.com> 
> [mailto:sjg at google.com <mailto:sjg at google.com>] On Behalf Of Simon Glass
> > > Sent: 2016年5月5日 10:38
> > > To: Yang, Wenyou <Wenyou.Yang at atmel.com 
> <mailto:Wenyou.Yang at atmel.com>>
> > > Cc: hs at denx.de <mailto:hs at denx.de>; U-Boot Mailing List 
> <u-boot at lists.denx.de <mailto:u-boot at lists.denx.de>>; Joe Hershberger
> > > <joe.hershberger at ni.com <mailto:joe.hershberger at ni.com>>
> > > Subject: Re: [U-Boot] [PATCH 07/18] net: macb: Convert to driver model
> > >
> > > Hi,
> > >
> > > On 4 May 2016 at 01:32, Yang, Wenyou <Wenyou.Yang at atmel.com 
> <mailto:Wenyou.Yang at atmel.com>> wrote:
> > > >
> > > > Hi
> > > >
> > > > > -----Original Message-----
> > > > > From: U-Boot [mailto:u-boot-bounces at lists.denx.de 
> <mailto:u-boot-bounces at lists.denx.de>] On Behalf Of
> > > > > Heiko Schocher
> > > > > Sent: 2016年5月3日 15:54
> > > > > To: Simon Glass <sjg at chromium.org <mailto:sjg at chromium.org>>
> > > > > Cc: U-Boot Mailing List <u-boot at lists.denx.de 
> <mailto:u-boot at lists.denx.de>>; Joe Hershberger
> > > > > <joe.hershberger at ni.com <mailto:joe.hershberger at ni.com>>
> > > > > Subject: Re: [U-Boot] [PATCH 07/18] net: macb: Convert to driver
> > > > > model
> > > > >
> > > > > Hello Simon,
> > > > >
> > > > > Am 03.05.2016 um 08:40 schrieb Simon Glass:
> > > > > > Add driver-model support to this driver. The old code 
> remains for
> > > > > > now so that we can convert boards one at a time.
> > > > > >
> > > > > > Signed-off-by: Simon Glass <sjg at chromium.org 
> <mailto:sjg at chromium.org>>
> > > > > > ---
> > > > > >
> > > > > >   drivers/net/macb.c | 119
> > > > > +++++++++++++++++++++++++++++++++++++++++++++++++++++
> > > > > >   1 file changed, 119 insertions(+)
> > > > >
> > > > > Thanks!
> > > > >
> > > > > Reviewed-by: Heiko Schocher <hs at denx.de <mailto:hs at denx.de>>
> > > > >
> > > > > tested on the smartweb, corvus, taurus and axm board
> > > > >
> > > > > Tested-by: Heiko Schocher <hs at denx.de <mailto:hs at denx.de>>
> > > >
> > > > I tried to test this patch series on SAMA5D2 Xplained board, but 
> I have the
> > > compile warning below. Did you experience it?
> > > >
> > > > ---8<---------
> > > > drivers/net/macb.c: In function 'macb_phy_init':
> > > > drivers/net/macb.c:487:9: warning: passing argument 3 of 
> 'phy_connect'
> > > > from incompatible pointer type [enabled by default] In file 
> included from
> > > include/miiphy.h:22:0,
> > > >                  from drivers/net/macb.c:36:
> > > > include/phy.h:226:20: note: expected 'struct udevice *' but 
> argument is of type
> > > 'const struct device **'
> > > > --->8--------
> > >
> > > No I don't see that problem. I did a full build test. What is the 
> board config name
> > > you are using?
> >
> > The board is SAMA5D2 Xplained board, the .config file is attached.
> >
> > I noticed that in include/phy.h file,  phy_connect() has different 
> prototype for enabling CONFIG_DM_ETH or not.
> >
> > So, I think this issue should be exist.
>
> Is that board in mainline?
>
Yes, in mainline.

The type of 'dev' parameter of phy_connect() is struct udevice *, 
instead of struct eth_device * when enabling CONFIG_DM_ETH.

> >
> > > >
> > > > Thanks.
> > > >
> > > > >
> > > > > bye,
> > > > > Heiko
> > > > > --
> > > > > DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
> > > > > HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell,
> > > > > Germany _______________________________________________
> > > > > U-Boot mailing list
> > > > > U-Boot at lists.denx.de <mailto:U-Boot at lists.denx.de>
> > > > > http://lists.denx.de/mailman/listinfo/u-boot
>
> Regards,
> Simon
>

Best Regards,
Wenyou Yang