[U-Boot] [PATCH 07/18] net: macb: Convert to driver model

Yang, Wenyou Wenyou.Yang at atmel.com
Fri May 6 09:10:13 CEST 2016


Hi Simon,

> -----Original Message-----
> From: sjg at google.com [mailto:sjg at google.com] On Behalf Of Simon Glass
> Sent: 2016年5月6日 1:19
> To: Yang, Wenyou <Wenyou.Yang at atmel.com>
> Cc: U-Boot Mailing List <u-boot at lists.denx.de>; Joe Hershberger
> <joe.hershberger at ni.com>; hs at denx.de
> Subject: Re: [U-Boot] [PATCH 07/18] net: macb: Convert to driver model
> 
> Hi,
> 
> On 4 May 2016 at 21:37, Yang, Wenyou <wenyou.yang at atmel.com> wrote:
> > Hi,
> >
> >
> > On 2016/5/5 11:18, Simon Glass wrote:
> >
> > Hi,
> >
> > On May 4, 2016 21:15, "Yang, Wenyou" <Wenyou.Yang at atmel.com> wrote:
> >>
> >> Hi Simon,
> >>
> >> > -----Original Message-----
> >> > From: sjg at google.com [mailto:sjg at google.com] On Behalf Of Simon
> >> > Glass
> >> > Sent: 2016年5月5日 10:38
> >> > To: Yang, Wenyou <Wenyou.Yang at atmel.com>
> >> > Cc: hs at denx.de; U-Boot Mailing List <u-boot at lists.denx.de>; Joe
> >> > Hershberger <joe.hershberger at ni.com>
> >> > Subject: Re: [U-Boot] [PATCH 07/18] net: macb: Convert to driver
> >> > model
> >> >
> >> > Hi,
> >> >
> >> > On 4 May 2016 at 01:32, Yang, Wenyou <Wenyou.Yang at atmel.com> wrote:
> >> > >
> >> > > Hi
> >> > >
> >> > > > -----Original Message-----
> >> > > > From: U-Boot [mailto:u-boot-bounces at lists.denx.de] On Behalf Of
> >> > > > Heiko Schocher
> >> > > > Sent: 2016年5月3日 15:54
> >> > > > To: Simon Glass <sjg at chromium.org>
> >> > > > Cc: U-Boot Mailing List <u-boot at lists.denx.de>; Joe Hershberger
> >> > > > <joe.hershberger at ni.com>
> >> > > > Subject: Re: [U-Boot] [PATCH 07/18] net: macb: Convert to
> >> > > > driver model
> >> > > >
> >> > > > Hello Simon,
> >> > > >
> >> > > > Am 03.05.2016 um 08:40 schrieb Simon Glass:
> >> > > > > Add driver-model support to this driver. The old code remains
> >> > > > > for now so that we can convert boards one at a time.
> >> > > > >
> >> > > > > Signed-off-by: Simon Glass <sjg at chromium.org>
> >> > > > > ---
> >> > > > >
> >> > > > >   drivers/net/macb.c | 119
> >> > > > +++++++++++++++++++++++++++++++++++++++++++++++++++++
> >> > > > >   1 file changed, 119 insertions(+)
> >> > > >
> >> > > > Thanks!
> >> > > >
> >> > > > Reviewed-by: Heiko Schocher <hs at denx.de>
> >> > > >
> >> > > > tested on the smartweb, corvus, taurus and axm board
> >> > > >
> >> > > > Tested-by: Heiko Schocher <hs at denx.de>
> >> > >
> >> > > I tried to test this patch series on SAMA5D2 Xplained board, but
> >> > > I have the
> >> > compile warning below. Did you experience it?
> >> > >
> >> > > ---8<---------
> >> > > drivers/net/macb.c: In function 'macb_phy_init':
> >> > > drivers/net/macb.c:487:9: warning: passing argument 3 of 'phy_connect'
> >> > > from incompatible pointer type [enabled by default] In file
> >> > > included from
> >> > include/miiphy.h:22:0,
> >> > >                  from drivers/net/macb.c:36:
> >> > > include/phy.h:226:20: note: expected 'struct udevice *' but
> >> > > argument is of type
> >> > 'const struct device **'
> >> > > --->8--------
> >> >
> >> > No I don't see that problem. I did a full build test. What is the
> >> > board config name you are using?
> >>
> >> The board is SAMA5D2 Xplained board, the .config file is attached.
> >>
> >> I noticed that in include/phy.h file,  phy_connect() has different
> >> prototype for enabling CONFIG_DM_ETH or not.
> >>
> >> So, I think this issue should be exist.
> >
> > Is that board in mainline?
> >
> > Yes, in mainline.
> >
> > The type of 'dev' parameter of phy_connect() is struct udevice *,
> > instead of struct eth_device * when enabling CONFIG_DM_ETH.
> 
> OK, sounds like it needs a patch. Can you fix it when you enable DM_ETH for that
> board?

Okay, I will try to fix it.


Best Regards,
Wenyou Yang




More information about the U-Boot mailing list