[U-Boot] [PATCH V2 6/9] mips: ath79: dts: Add ethernet MAC nodes for ar933x

[Marek Vasut]

Add node for both ethernet controllers in the ar933x.
The PHY is attached only to the first ethernet controller.

Signed-off-by: Marek Vasut <marex at denx.de>
Cc: Daniel Schwierzeck <daniel.schwierzeck at gmail.com>
Cc: Wills Wang <wills.wang at live.com>
---
V2: Add PHY node for ag7xxx
---
 arch/mips/dts/ar933x.dtsi | 26 ++++++++++++++++++++++++++
 1 file changed, 26 insertions(+)

diff --git a/arch/mips/dts/ar933x.dtsi b/arch/mips/dts/ar933x.dtsi
index 2e124a4..00896b2 100644
--- a/arch/mips/dts/ar933x.dtsi
+++ b/arch/mips/dts/ar933x.dtsi
@@ -73,6 +73,32 @@
 
 				status = "disabled";
 			};
+
+			gmac0: eth at 0x19000000 {
+				compatible = "qca,ag7240-mac";
+				reg = <0x19000000 0x200>;
+				phy = <&phy0>;
+				phy-mode = "rmii";
+
+				status = "disabled";
+
+				mdio {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					phy0: ethernet-phy at 0 {
+						reg = <0>;
+					};
+				};
+			};
+
+			gmac1: eth at 0x1a000000 {
+				compatible = "qca,ag7240-mac";
+				reg = <0x1a000000 0x200>;
+				phy = <&phy0>;
+				phy-mode = "rgmii";
+
+				status = "disabled";
+			};
 		};
 
 		spi0: spi at 1f000000 {
-- 
2.7.0