[U-Boot] [PATCH] imx: imx-common: print i.MX 7 SoC names consistently

[Stefan Agner]

On 2016-05-06 12:19, Fabio Estevam wrote:
> Hi Stefan,
> 
> On Fri, May 6, 2016 at 3:21 PM, Stefan Agner <stefan at agner.ch> wrote:
>> According to the product website, the full names are i.MX 7Solo
>> and i.MX 7Dual, whereas the short form is i.MX7S and i.MX7D. Be
>> consistent and print the short form for both supported i.MX 7 SoCs.
>>
>> Signed-off-by: Stefan Agner <stefan at agner.ch>
> 
> That's fine:
> 
> Reviewed-by: Fabio Estevam <fabio.estevam at nxp.com>
> 
> I have an off-topic question though: have you ever managed to boot
> mx7solo with a mainline kernel?

Yes, it works nicely, just make sure you disable the second USB port:

&usbotg2 {
	status = "disabled";
};

&usbmisc2 {
	status = "disabled";
};

&usbphynop2 {
	status = "disabled";
};

Which brings me to another question:
How do we deal with the i.MX 7Solo base device tree?

Currently there is imx7d.dtsi, which is basically the main device tree.
I feel ideally we should make a imx7s.dtsi as the base device tree
(since i.MX7S has a subset of features) and include that from
imx7d.dtsi...

--
Stefan