[U-Boot] [PATCH] imx: mx6: mx6sl_pins: add GPIO variant for SD1_DAT5

[Stefano Babic]

On 24/04/2016 19:54, Eric Nelson wrote:
> This patch adds the IOMUX setting for using SD1_DAT5 as GPIO5:9.
> 
> Signed-off-by: Eric Nelson <eric at nelint.com>
> ---
>  arch/arm/include/asm/arch-mx6/mx6sl_pins.h | 1 +
>  1 file changed, 1 insertion(+)
> 
> diff --git a/arch/arm/include/asm/arch-mx6/mx6sl_pins.h b/arch/arm/include/asm/arch-mx6/mx6sl_pins.h
> index 6ba1034..919d83d 100644
> --- a/arch/arm/include/asm/arch-mx6/mx6sl_pins.h
> +++ b/arch/arm/include/asm/arch-mx6/mx6sl_pins.h
> @@ -22,6 +22,7 @@ enum {
>  	MX6_PAD_SD1_DAT3__USDHC1_DAT3				= IOMUX_PAD(0x0548, 0x0240, 0, 0x0000, 0, 0),
>  	MX6_PAD_SD1_DAT4__USDHC1_DAT4				= IOMUX_PAD(0x054C, 0x0244, 0, 0x0000, 0, 0),
>  	MX6_PAD_SD1_DAT5__USDHC1_DAT5				= IOMUX_PAD(0x0550, 0x0248, 0, 0x0000, 0, 0),
> +	MX6_PAD_SD1_DAT5__GPIO_5_9				= IOMUX_PAD(0x0550, 0x0248, 5, 0x0000, 0, 0),
>  	MX6_PAD_SD1_DAT6__USDHC1_DAT6				= IOMUX_PAD(0x0554, 0x024C, 0, 0x0000, 0, 0),
>  	MX6_PAD_SD1_DAT7__USDHC1_DAT7				= IOMUX_PAD(0x0558, 0x0250, 0, 0x0000, 0, 0),
>  	MX6_PAD_KEY_ROW7__GPIO_4_7					= IOMUX_PAD(0x04B0, 0x01A8, 5, 0x0000, 0, 0),
> 

Applied to -next, thanks !

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================