[U-Boot] [PATCH 0/4] Add support for Cadence QSPI on K2G

[Jagan Teki]

On 13 April 2016 at 16:22, Vignesh R <vigneshr at ti.com> wrote:
>
> This series adds support for Cadence QSPI controller present on K2G SoC.
>
> The first patch extends AHB address to 32 bit as K2G has 32 bit AHB
> address. Second patch enable QUAD mode based on DT data instead of
> relying on config option. And last to patches add DT node and add
> configs to enable the driver.
>
> Depends on [1] to enable SPI driver model support on K2G and [2] to
> support different bus frequencies for two different SPI controllers
> present on K2G EVM.
>
> [1]https://www.mail-archive.com/u-boot@lists.denx.de/msg209556.html
> [2]https://patchwork.ozlabs.org/patch/609947/
>
> Vignesh R (4):
>   spi: cadence_qspi_apb: Support 32 bit AHB address
>   spi: cadence_quadspi: Enable QUAD mode based on DT data
>   ARM: dts: K2G: Add support for QSPI controller

Please rebase this?

>   defconfig: k2g_evm_defconfig: Enable Cadence QSPI controller

Reviewed-by: Jagan Teki <jteki at openedev.com>

-- 
Jagan.