[U-Boot] [PATCH v2 00/25] exynos: video: Convert exynos LCD driver to use driver model

[Jaehoon Chung]

On 05/09/2016 08:00 PM, Minkyu Kang wrote:
> Hi Jaehoon,
> 
> On 08/05/16 06:25, Simon Glass wrote:
>> Hi,
>>
>> On 1 March 2016 at 18:51, Minkyu Kang <mk7.kang at samsung.com> wrote:
>>> Hi,
>>>
>>> On 29/02/16 16:18, Jaehoon Chung wrote:
>>>> Hi,
>>>>
>>>> On 02/29/2016 01:23 PM, Simon Glass wrote:
>>>>> Hi,
>>>>>
>>>>> On 23 February 2016 at 05:04, Minkyu Kang <mk7.kang at samsung.com> wrote:
>>>>>> Dear Simon Glass,
>>>>>>
>>>>>> On 23/02/16 15:42, Simon Glass wrote:
>>>>>>> Hi Minkyu,
>>>>>>>
>>>>>>> On 21 February 2016 at 21:08, Simon Glass <sjg at chromium.org> wrote:
>>>>>>>>
>>>>>>>> This series converts the exynos LCD driver to work with driver model. Only
>>>>>>>> the eDP display is converted - the MIPI display is left mostly alone as I
>>>>>>>> do not have a device to test with.
>>>>>>>>
>>>>>>>> The conversion involves some refactoring to simplify the code, reduce the
>>>>>>>> amount of global/static data and allow boards to be built without LCD
>>>>>>>> support.
>>>>>>>>
>>>>>>>> The series is tested with snow, spring, pit and pi. It disables LCD on other
>>>>>>>> exynos boards so that they will still build with these changes. Further work
>>>>>>>> will be needed (by someone with a board) to convert the others. I am not
>>>>>>>> sure when this series can be applied.
>>>>>>>>
>>>>>>>> The series also brings in device tree features from Linux v4.4. It would be
>>>>>>>> useful to do a full sync with the kernel on these files, but this is really
>>>>>>>> a job for the Samsung maintainer :-)
>>>>>>>>
>>>>>>>> The series is available at u-boot-dm/rkg-working.
>>>>>>>>
>>>>>>>> Changes in v2:
>>>>>>>> - Rebase to master
>>>>>>>> - Rebase to master
>>>>>>>>
>>>>>>>
>>>>>>> What do you think we should do about applying this series?
>>>>>>>
>>>>>>
>>>>>> Although we have to do remaining work, I think applying is possible without next work.
>>>>>>
>>>>>> Board maintainers, what do you think?
>>>>>>
>>>>>> Remaining Work:
>>>>>> - MIPI display driver
>>>>>> - s5pc210_universal
>>>>>> - smdk5420
>>>>>> - smdk5250
>>>>>> - trats
>>>>>> - trats2
>>>>>>
>>>>>> Thanks,
>>>>>> Minkyu Kang.
>>>>>
>>>>> Well, no replies as yet. The main work requires is MIPI, but as I
>>>>> don't have the hardware, I can't help with that. At least I have made
>>>>> sure that everything builds OK.
>>>>
>>>> Sorry for late..I will check these patches on this week..Tomorrow is holiday..
>>>> So I can check from Wed.
>>>
>>> Thank you, Jaehoon.
>>
>> It has been a few months now - if you like I can apply these via the -dm tree.
>>
> 
> any progress?

Sorry for late..Thanks for reminding.

> 
> Thanks,
> Minkyu Kang.
>