[U-Boot] Issues with bbone with 2016.05rc3

[Lokesh Vutla]

Hi Peter,

On Tuesday 10 May 2016 05:18 PM, Peter Robinson wrote:
> Hi All,
> 
> Not sure if this has been addressed since RC3 but thought I'd
> highlight it just in case. I've not had time to test 2016.05 as much
> as I'd like so playing a bit of catch up here.

Which defconfig are you using? Recently MMC is converted to DM, may be
that could have caused some issue. Can you just disable EMMC_BOOT and
try again?

Thanks and regards,
Lokesh

> 
> I'm seeing two different errors:
> 
> On a BBBlack booting off the emmc (2Gb variety) I see:
> 
> U-Boot SPL 2016.05-rc3 (Apr 28 2016 - 10:53:41)
> Trying to boot from MMC2
> Card did not respond to voltage select!
> *** Warning - MMC init failed, using default environment
> 
> On a BBGreen booting from a mSD card I see:
> 
> U-Boot SPL 2016.05-rc3 (Apr 28 2016 - 10:53:41)
> Trying to boot from MMC1
> Card doesn't support part_switch
> MMC partition switch failed
> *** Warning - MMC partition switch failed, using default environment
> 
> Not sure if they're related. Built with gcc6 if that matters, or at
> least for reference.
> 
> Peter
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
>