[U-Boot] [PATCH v3 6/7] ARMv8/Layerscape: switch SMP method to spin-table when the PSCI isn't available

York Sun york.sun at nxp.com
Tue May 10 21:58:15 CEST 2016


On 04/27/2016 06:50 AM, Zhiqiang Hou wrote:
> From: Hou Zhiqiang <Zhiqiang.Hou at nxp.com>
> 
> If the PSCI and PPA is ready, skip the fixup for spin-table and
> waking secondary cores. If not, change SMP method to spin-table,
> and the device node of PSCI will be removed.
> 
> Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou at nxp.com>
> ---
> V3:
>  - new patch
> 
>  arch/arm/cpu/armv8/fsl-layerscape/cpu.c | 14 +++++++++++---
>  arch/arm/cpu/armv8/fsl-layerscape/fdt.c | 31 +++++++++++++++++++++++++++++++
>  2 files changed, 42 insertions(+), 3 deletions(-)
> 
> diff --git a/arch/arm/cpu/armv8/fsl-layerscape/cpu.c b/arch/arm/cpu/armv8/fsl-layerscape/cpu.c
> index 672a453..937f7ec 100644
> --- a/arch/arm/cpu/armv8/fsl-layerscape/cpu.c
> +++ b/arch/arm/cpu/armv8/fsl-layerscape/cpu.c
> @@ -23,6 +23,9 @@
>  #ifdef CONFIG_FSL_ESDHC
>  #include <fsl_esdhc.h>
>  #endif
> +#ifdef CONFIG_FSL_LS_PPA
> +#include <asm/armv8/sec_firmware.h>
> +#endif
>  
>  DECLARE_GLOBAL_DATA_PTR;
>  
> @@ -625,9 +628,14 @@ int arch_early_init_r(void)
>  #endif
>  
>  #ifdef CONFIG_MP
> -	rv = fsl_layerscape_wake_seconday_cores();
> -	if (rv)
> -		printf("Did not wake secondary cores\n");
> +#if defined(CONFIG_FSL_LS_PPA) && defined(CONFIG_ARMV8_PSCI)
> +	if (sec_firmware_validate())
> +#endif
> +	{
> +		rv = fsl_layerscape_wake_seconday_cores();
> +		if (rv)
> +			printf("Did not wake secondary cores\n");
> +	}
>  #endif
>  
>  #ifdef CONFIG_SYS_HAS_SERDES
> diff --git a/arch/arm/cpu/armv8/fsl-layerscape/fdt.c b/arch/arm/cpu/armv8/fsl-layerscape/fdt.c
> index 1e875c4..333b973 100644
> --- a/arch/arm/cpu/armv8/fsl-layerscape/fdt.c
> +++ b/arch/arm/cpu/armv8/fsl-layerscape/fdt.c
> @@ -20,6 +20,9 @@
>  #ifdef CONFIG_MP
>  #include <asm/arch/mp.h>
>  #endif
> +#ifdef CONFIG_FSL_LS_PPA
> +#include <asm/armv8/sec_firmware.h>
> +#endif
>  
>  int fdt_fixup_phy_connection(void *blob, int offset, phy_interface_t phyc)
>  {
> @@ -36,7 +39,35 @@ void ft_fixup_cpu(void *blob)
>  	int addr_cells;
>  	u64 val, core_id;
>  	size_t *boot_code_size = &(__secondary_boot_code_size);
> +#if defined(CONFIG_FSL_LS_PPA) && defined(CONFIG_ARMV8_PSCI)
> +	int node;
> +#endif
> +
> +#if defined(CONFIG_FSL_LS_PPA) && defined(CONFIG_ARMV8_PSCI)
> +	if (sec_firmware_validate()) {
> +		/* remove psci DT node */
> +		node = fdt_path_offset(blob, "/psci");
> +		if (node >= 0)
> +			goto remove_psci_node;
> +
> +		node = fdt_node_offset_by_compatible(blob, -1, "arm,psci");
> +		if (node >= 0)
> +			goto remove_psci_node;
>  
> +		node = fdt_node_offset_by_compatible(blob, -1, "arm,psci-0.2");
> +		if (node >= 0)
> +			goto remove_psci_node;
> +
> +		node = fdt_node_offset_by_compatible(blob, -1, "arm,psci-1.0");
> +		if (node >= 0)
> +			goto remove_psci_node;
> +
> +remove_psci_node:
> +		if (node >= 0)
> +			fdt_del_node(blob, node);
> +	} else
> +		return;
> +#endif
>  	off = fdt_path_offset(blob, "/cpus");
>  	if (off < 0) {
>  		puts("couldn't find /cpus node\n");
> 


Zhiqiang,

I think your patch sequence and logic is backward. To make the transition
smoothly, we need to make sure U-Boot always works. You can introduce PPA with
PSCI support. After each patch applied, U-Boot should still work. I suggest you
to check if PPA/PSCI is available before fixing up device tree. You can also
switch to PSCI to boot secondary cores by then.

York



More information about the U-Boot mailing list