[U-Boot] [PATCH 0/9][v2] armv8: fsl-layerscape: Add support of LS1012A SoC and platform

Prabhakar Kushwaha prabhakar.kushwaha at nxp.com
Wed May 11 09:29:07 CEST 2016


The QorIQ LS1012A processor is a new Freescale' SoC optimized for 
battery-backed or USB-powered, integrates a single ARM Cortex-A53
core with a hardware packet forwarding engine and high-speed 
interfaces to deliver line-rate networking performance.

LS1012AQDS, LS1012ARDB are a high-performance development platform
using LS1012A SoC.

This patch-set add support of LS1012A SoC, platfrom along with modify
existing code to support LS1012A. 

This patch set is dependent upon following spi related patches
https://patchwork.ozlabs.org/patch/597365/
https://patchwork.ozlabs.org/patch/597366/
https://patchwork.ozlabs.org/patch/597367/
https://patchwork.ozlabs.org/patch/597368/
https://patchwork.ozlabs.org/patch/597369/

Changes for v2: Add support of board, fpga info and qixis_reset for QDS


Abhimanyu Saini (2):
  board: freescale: common: Conditionally compile IFC QXIS func
  board: freescale: common: Add flag for LBMAP brdcfg reg offset

Prabhakar Kushwaha (7):
  armv8: fsl-layerscape: Put SMMU config code in SMMU_BASE
  armv8: fsl-layerscape: Avoid LS1043A specifc defines
  driver: mtd: spi: Adding support for QSPI flash
  armv8: fsl-layerscape: fix compile warning "rcw_tmp"
  armv8: fsl-layerscape: Add support of QorIQ LS1012A SoC
  armv8: ls1012a: Add support of ls1012aqds board
  armv8: ls1012a: Add support of ls1012ardb board

 arch/arm/Kconfig                                   |  20 ++
 arch/arm/cpu/armv8/fsl-layerscape/Makefile         |   4 +
 .../arm/cpu/armv8/fsl-layerscape/fsl_lsch2_speed.c |  29 ++-
 arch/arm/cpu/armv8/fsl-layerscape/lowlevel.S       |   4 +
 arch/arm/cpu/armv8/fsl-layerscape/ls1012a_serdes.c |  74 +++++++
 arch/arm/cpu/armv8/fsl-layerscape/soc.c            |   2 +-
 arch/arm/dts/Makefile                              |   4 +-
 arch/arm/dts/fsl-ls1012a-qds.dts                   |  14 ++
 arch/arm/dts/fsl-ls1012a-qds.dtsi                  | 123 ++++++++++++
 arch/arm/dts/fsl-ls1012a-rdb.dts                   |  16 ++
 arch/arm/dts/fsl-ls1012a-rdb.dtsi                  |  39 ++++
 arch/arm/dts/fsl-ls1012a.dtsi                      | 119 +++++++++++
 arch/arm/include/asm/arch-fsl-layerscape/config.h  |  31 +++
 arch/arm/include/asm/arch-fsl-layerscape/cpu.h     |   1 +
 .../include/asm/arch-fsl-layerscape/fsl_serdes.h   |   3 +-
 .../include/asm/arch-fsl-layerscape/immap_lsch2.h  |   4 +
 .../include/asm/arch-fsl-layerscape/ns_access.h    |  10 +
 arch/arm/include/asm/arch-fsl-layerscape/soc.h     |   1 +
 board/freescale/common/qixis.c                     |  13 +-
 board/freescale/ls1012aqds/Kconfig                 |  15 ++
 board/freescale/ls1012aqds/MAINTAINERS             |   6 +
 board/freescale/ls1012aqds/Makefile                |   7 +
 board/freescale/ls1012aqds/README                  |  94 +++++++++
 board/freescale/ls1012aqds/ls1012aqds.c            | 220 +++++++++++++++++++++
 board/freescale/ls1012aqds/ls1012aqds_qixis.h      |  35 ++++
 board/freescale/ls1012ardb/Kconfig                 |  15 ++
 board/freescale/ls1012ardb/MAINTAINERS             |   6 +
 board/freescale/ls1012ardb/Makefile                |   7 +
 board/freescale/ls1012ardb/README                  |  89 +++++++++
 board/freescale/ls1012ardb/ls1012ardb.c            | 210 ++++++++++++++++++++
 configs/ls1012aqds_qspi_defconfig                  |  32 +++
 configs/ls1012ardb_qspi_defconfig                  |  32 +++
 drivers/mtd/spi/sf_params.c                        |   1 +
 drivers/mtd/spi/spi_flash.c                        |   5 +-
 include/configs/ls1012a_common.h                   | 195 ++++++++++++++++++
 include/configs/ls1012aqds.h                       | 150 ++++++++++++++
 include/configs/ls1012ardb.h                       |  59 ++++++
 include/fsl_mmdc.h                                 |  94 +++++++++
 include/linux/usb/xhci-fsl.h                       |   6 +-
 39 files changed, 1774 insertions(+), 15 deletions(-)
 create mode 100644 arch/arm/cpu/armv8/fsl-layerscape/ls1012a_serdes.c
 create mode 100644 arch/arm/dts/fsl-ls1012a-qds.dts
 create mode 100644 arch/arm/dts/fsl-ls1012a-qds.dtsi
 create mode 100644 arch/arm/dts/fsl-ls1012a-rdb.dts
 create mode 100644 arch/arm/dts/fsl-ls1012a-rdb.dtsi
 create mode 100644 arch/arm/dts/fsl-ls1012a.dtsi
 create mode 100644 board/freescale/ls1012aqds/Kconfig
 create mode 100644 board/freescale/ls1012aqds/MAINTAINERS
 create mode 100644 board/freescale/ls1012aqds/Makefile
 create mode 100644 board/freescale/ls1012aqds/README
 create mode 100644 board/freescale/ls1012aqds/ls1012aqds.c
 create mode 100644 board/freescale/ls1012aqds/ls1012aqds_qixis.h
 create mode 100644 board/freescale/ls1012ardb/Kconfig
 create mode 100644 board/freescale/ls1012ardb/MAINTAINERS
 create mode 100644 board/freescale/ls1012ardb/Makefile
 create mode 100644 board/freescale/ls1012ardb/README
 create mode 100644 board/freescale/ls1012ardb/ls1012ardb.c
 create mode 100644 configs/ls1012aqds_qspi_defconfig
 create mode 100644 configs/ls1012ardb_qspi_defconfig
 create mode 100644 include/configs/ls1012a_common.h
 create mode 100644 include/configs/ls1012aqds.h
 create mode 100644 include/configs/ls1012ardb.h
 create mode 100644 include/fsl_mmdc.h

-- 
1.9.1




More information about the U-Boot mailing list