[U-Boot] [PATCH 05/12] x86: qemu: split qfw command interface and qfw core
Miao Yan
yanmiaobest at gmail.com
Fri May 13 08:29:37 CEST 2016
This patch splits qfw command interface and qfw core function into two
files, and introduces a new Kconfig option (CONFIG_QFW). for
qfw core.
Now when qfw command interface is enabled, it will automatically select
qfw core. This patch also makes the ACPI table generation select
CONFIG_QFW.
Signed-off-by: Miao Yan <yanmiaobest at gmail.com>
---
arch/x86/Kconfig | 2 +-
arch/x86/cpu/mp_init.c | 6 +-
arch/x86/cpu/qemu/Makefile | 3 +-
arch/x86/cpu/qemu/acpi_table.c | 2 +
arch/x86/cpu/qemu/qemu.c | 4 +
cmd/Kconfig | 1 +
cmd/Makefile | 2 +-
cmd/cmd_qfw.c | 182 +++++++++++++++++++++
cmd/qemu_fw_cfg.c | 353 -----------------------------------------
common/Kconfig | 1 +
drivers/misc/Kconfig | 6 +
drivers/misc/Makefile | 1 +
drivers/misc/qemu_fw_cfg.c | 185 +++++++++++++++++++++
13 files changed, 390 insertions(+), 358 deletions(-)
create mode 100644 cmd/cmd_qfw.c
delete mode 100644 cmd/qemu_fw_cfg.c
create mode 100644 drivers/misc/qemu_fw_cfg.c
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index a60e0da..2f63170 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -436,7 +436,7 @@ config GENERATE_MP_TABLE
config GENERATE_ACPI_TABLE
bool "Generate an ACPI (Advanced Configuration and Power Interface) table"
default n
- select QEMU_FW_CFG if QEMU
+ select QFW if QEMU
help
The Advanced Configuration and Power Interface (ACPI) specification
provides an open standard for device configuration and management
diff --git a/arch/x86/cpu/mp_init.c b/arch/x86/cpu/mp_init.c
index 13bec7a..109b3d7 100644
--- a/arch/x86/cpu/mp_init.c
+++ b/arch/x86/cpu/mp_init.c
@@ -11,7 +11,9 @@
#include <dm.h>
#include <errno.h>
#include <malloc.h>
+#ifdef CONFIG_QFW
#include <qemu_fw_cfg.h>
+#endif
#include <asm/atomic.h>
#include <asm/cpu.h>
#include <asm/interrupt.h>
@@ -420,7 +422,7 @@ static int init_bsp(struct udevice **devp)
return 0;
}
-#ifdef CONFIG_QEMU
+#ifdef CONFIG_QFW
static int qemu_cpu_fixup(void)
{
int ret;
@@ -496,7 +498,7 @@ int mp_init(struct mp_params *p)
if (ret)
return ret;
-#ifdef CONFIG_QEMU
+#ifdef CONFIG_QFW
ret = qemu_cpu_fixup();
if (ret)
return ret;
diff --git a/arch/x86/cpu/qemu/Makefile b/arch/x86/cpu/qemu/Makefile
index 43ee4bd..7c08c3d 100644
--- a/arch/x86/cpu/qemu/Makefile
+++ b/arch/x86/cpu/qemu/Makefile
@@ -7,5 +7,6 @@
ifndef CONFIG_EFI_STUB
obj-y += car.o dram.o
endif
-obj-y += cpu.o qemu.o
+obj-y += qemu.o
+obj-$(CONFIG_QFW) += cpu.o
obj-$(CONFIG_GENERATE_ACPI_TABLE) += acpi_table.o
diff --git a/arch/x86/cpu/qemu/acpi_table.c b/arch/x86/cpu/qemu/acpi_table.c
index b17fa03..4584fc7 100644
--- a/arch/x86/cpu/qemu/acpi_table.c
+++ b/arch/x86/cpu/qemu/acpi_table.c
@@ -8,7 +8,9 @@
#include <command.h>
#include <errno.h>
#include <malloc.h>
+#ifdef CONFIG_QFW
#include <qemu_fw_cfg.h>
+#endif
#include <asm/io.h>
#include <asm/tables.h>
#include <asm/e820.h>
diff --git a/arch/x86/cpu/qemu/qemu.c b/arch/x86/cpu/qemu/qemu.c
index b41e4ec..2631e99 100644
--- a/arch/x86/cpu/qemu/qemu.c
+++ b/arch/x86/cpu/qemu/qemu.c
@@ -6,7 +6,9 @@
#include <common.h>
#include <pci.h>
+#ifdef CONFIG_QFW
#include <qemu_fw_cfg.h>
+#endif
#include <asm/irq.h>
#include <asm/post.h>
#include <asm/processor.h>
@@ -88,7 +90,9 @@ static void qemu_chipset_init(void)
enable_pm_ich9();
}
+#ifdef CONFIG_QFW
qemu_fwcfg_init();
+#endif
}
int arch_cpu_init(void)
diff --git a/cmd/Kconfig b/cmd/Kconfig
index c0fffe3..08b761f 100644
--- a/cmd/Kconfig
+++ b/cmd/Kconfig
@@ -596,6 +596,7 @@ config CMD_SOUND
config CMD_QEMU_FW_CFG
bool "qfw"
depends on X86
+ select QFW
help
This provides access to the QEMU firmware interface. The main
feature is to allow easy loading of files passed to qemu-system
diff --git a/cmd/Makefile b/cmd/Makefile
index f99e67d..31e4da7 100644
--- a/cmd/Makefile
+++ b/cmd/Makefile
@@ -105,7 +105,7 @@ endif
obj-y += pcmcia.o
obj-$(CONFIG_CMD_PORTIO) += portio.o
obj-$(CONFIG_CMD_PXE) += pxe.o
-obj-$(CONFIG_CMD_QEMU_FW_CFG) += qemu_fw_cfg.o
+obj-$(CONFIG_CMD_QEMU_FW_CFG) += cmd_qfw.o
obj-$(CONFIG_CMD_READ) += read.o
obj-$(CONFIG_CMD_REGINFO) += reginfo.o
obj-$(CONFIG_CMD_REISER) += reiser.o
diff --git a/cmd/cmd_qfw.c b/cmd/cmd_qfw.c
new file mode 100644
index 0000000..eefaf65
--- /dev/null
+++ b/cmd/cmd_qfw.c
@@ -0,0 +1,182 @@
+/*
+ * (C) Copyright 2015 Miao Yan <yanmiaobest at gmail.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <command.h>
+#include <errno.h>
+#include <qemu_fw_cfg.h>
+
+/*
+ * This function prepares kernel for zboot. It loads kernel data
+ * to 'load_addr', initrd to 'initrd_addr' and kernel command
+ * line using qemu fw_cfg interface.
+ */
+static int qemu_fwcfg_setup_kernel(void *load_addr, void *initrd_addr)
+{
+ char *data_addr;
+ uint32_t setup_size, kernel_size, cmdline_size, initrd_size;
+
+ qemu_fwcfg_read_entry(FW_CFG_SETUP_SIZE, 4, &setup_size);
+ qemu_fwcfg_read_entry(FW_CFG_KERNEL_SIZE, 4, &kernel_size);
+
+ if (setup_size == 0 || kernel_size == 0) {
+ printf("warning: no kernel available\n");
+ return -1;
+ }
+
+ data_addr = load_addr;
+ qemu_fwcfg_read_entry(FW_CFG_SETUP_DATA,
+ le32_to_cpu(setup_size), data_addr);
+ data_addr += le32_to_cpu(setup_size);
+
+ qemu_fwcfg_read_entry(FW_CFG_KERNEL_DATA,
+ le32_to_cpu(kernel_size), data_addr);
+ data_addr += le32_to_cpu(kernel_size);
+
+ data_addr = initrd_addr;
+ qemu_fwcfg_read_entry(FW_CFG_INITRD_SIZE, 4, &initrd_size);
+ if (initrd_size == 0) {
+ printf("warning: no initrd available\n");
+ } else {
+ qemu_fwcfg_read_entry(FW_CFG_INITRD_DATA,
+ le32_to_cpu(initrd_size), data_addr);
+ data_addr += le32_to_cpu(initrd_size);
+ }
+
+ qemu_fwcfg_read_entry(FW_CFG_CMDLINE_SIZE, 4, &cmdline_size);
+ if (cmdline_size) {
+ qemu_fwcfg_read_entry(FW_CFG_CMDLINE_DATA,
+ le32_to_cpu(cmdline_size), data_addr);
+ /*
+ * if kernel cmdline only contains '\0', (e.g. no -append
+ * when invoking qemu), do not update bootargs
+ */
+ if (*data_addr != '\0') {
+ if (setenv("bootargs", data_addr) < 0)
+ printf("warning: unable to change bootargs\n");
+ }
+ }
+
+ printf("loading kernel to address %p size %x", load_addr,
+ le32_to_cpu(kernel_size));
+ if (initrd_size)
+ printf(" initrd %p size %x\n",
+ initrd_addr,
+ le32_to_cpu(initrd_size));
+ else
+ printf("\n");
+
+ return 0;
+}
+
+static int qemu_fwcfg_list_firmware(void)
+{
+ int ret;
+ struct fw_cfg_file_iter iter;
+ struct fw_file *file;
+
+ /* make sure fw_list is loaded */
+ ret = qemu_fwcfg_read_firmware_list();
+ if (ret)
+ return ret;
+
+
+ for (file = qemu_fwcfg_file_iter_init(&iter);
+ !qemu_fwcfg_file_iter_end(&iter);
+ file = qemu_fwcfg_file_iter_next(&iter)) {
+ printf("%-56s\n", file->cfg.name);
+ }
+
+ return 0;
+}
+
+static int qemu_fwcfg_do_list(cmd_tbl_t *cmdtp, int flag,
+ int argc, char * const argv[])
+{
+ if (qemu_fwcfg_list_firmware() < 0)
+ return CMD_RET_FAILURE;
+
+ return 0;
+}
+
+static int qemu_fwcfg_do_cpus(cmd_tbl_t *cmdtp, int flag,
+ int argc, char * const argv[])
+{
+ int ret = qemu_fwcfg_online_cpus();
+ if (ret < 0) {
+ printf("QEMU fw_cfg interface not found\n");
+ return CMD_RET_FAILURE;
+ }
+
+ printf("%d cpu(s) online\n", qemu_fwcfg_online_cpus());
+
+ return 0;
+}
+
+static int qemu_fwcfg_do_load(cmd_tbl_t *cmdtp, int flag,
+ int argc, char * const argv[])
+{
+ char *env;
+ void *load_addr;
+ void *initrd_addr;
+
+ env = getenv("loadaddr");
+ load_addr = env ?
+ (void *)simple_strtoul(env, NULL, 16) :
+ (void *)CONFIG_LOADADDR;
+
+ env = getenv("ramdiskaddr");
+ initrd_addr = env ?
+ (void *)simple_strtoul(env, NULL, 16) :
+ (void *)CONFIG_RAMDISK_ADDR;
+
+ if (argc == 2) {
+ load_addr = (void *)simple_strtoul(argv[0], NULL, 16);
+ initrd_addr = (void *)simple_strtoul(argv[1], NULL, 16);
+ } else if (argc == 1) {
+ load_addr = (void *)simple_strtoul(argv[0], NULL, 16);
+ }
+
+ return qemu_fwcfg_setup_kernel(load_addr, initrd_addr);
+}
+
+static cmd_tbl_t fwcfg_commands[] = {
+ U_BOOT_CMD_MKENT(list, 0, 1, qemu_fwcfg_do_list, "", ""),
+ U_BOOT_CMD_MKENT(cpus, 0, 1, qemu_fwcfg_do_cpus, "", ""),
+ U_BOOT_CMD_MKENT(load, 2, 1, qemu_fwcfg_do_load, "", ""),
+};
+
+static int do_qemu_fw(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+{
+ int ret;
+ cmd_tbl_t *fwcfg_cmd;
+
+ if (!qemu_fwcfg_present()) {
+ printf("QEMU fw_cfg interface not found\n");
+ return CMD_RET_USAGE;
+ }
+
+ fwcfg_cmd = find_cmd_tbl(argv[1], fwcfg_commands,
+ ARRAY_SIZE(fwcfg_commands));
+ argc -= 2;
+ argv += 2;
+ if (!fwcfg_cmd || argc > fwcfg_cmd->maxargs)
+ return CMD_RET_USAGE;
+
+ ret = fwcfg_cmd->cmd(fwcfg_cmd, flag, argc, argv);
+
+ return cmd_process_error(fwcfg_cmd, ret);
+}
+
+U_BOOT_CMD(
+ qfw, 4, 1, do_qemu_fw,
+ "QEMU firmware interface",
+ "<command>\n"
+ " - list : print firmware(s) currently loaded\n"
+ " - cpus : print online cpu number\n"
+ " - load <kernel addr> <initrd addr> : load kernel and initrd (if any), and setup for zboot\n"
+)
+
diff --git a/cmd/qemu_fw_cfg.c b/cmd/qemu_fw_cfg.c
deleted file mode 100644
index aab6b1a..0000000
--- a/cmd/qemu_fw_cfg.c
+++ /dev/null
@@ -1,353 +0,0 @@
-/*
- * (C) Copyright 2015 Miao Yan <yanmiaobest at gmail.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <command.h>
-#include <errno.h>
-#include <malloc.h>
-#include <qemu_fw_cfg.h>
-#include <asm/io.h>
-#include <linux/list.h>
-
-static bool fwcfg_present;
-static bool fwcfg_dma_present;
-
-static LIST_HEAD(fw_list);
-
-/* Read configuration item using fw_cfg PIO interface */
-static void qemu_fwcfg_read_entry_pio(uint16_t entry,
- uint32_t size, void *address)
-{
- uint32_t i = 0;
- uint8_t *data = address;
-
- /*
- * writting FW_CFG_INVALID will cause read operation to resume at
- * last offset, otherwise read will start at offset 0
- */
- if (entry != FW_CFG_INVALID)
- outw(entry, FW_CONTROL_PORT);
- while (size--)
- data[i++] = inb(FW_DATA_PORT);
-}
-
-/* Read configuration item using fw_cfg DMA interface */
-static void qemu_fwcfg_read_entry_dma(uint16_t entry,
- uint32_t size, void *address)
-{
- struct fw_cfg_dma_access dma;
-
- dma.length = cpu_to_be32(size);
- dma.address = cpu_to_be64((uintptr_t)address);
- dma.control = cpu_to_be32(FW_CFG_DMA_READ);
-
- /*
- * writting FW_CFG_INVALID will cause read operation to resume at
- * last offset, otherwise read will start at offset 0
- */
- if (entry != FW_CFG_INVALID)
- dma.control |= cpu_to_be32(FW_CFG_DMA_SELECT | (entry << 16));
-
- barrier();
-
- debug("qemu_fwcfg_dma_read_entry: addr %p, length %u control 0x%x\n",
- address, size, be32_to_cpu(dma.control));
-
- outl(cpu_to_be32((uint32_t)&dma), FW_DMA_PORT_HIGH);
-
- while (be32_to_cpu(dma.control) & ~FW_CFG_DMA_ERROR)
- __asm__ __volatile__ ("pause");
-}
-
-bool qemu_fwcfg_present(void)
-{
- return fwcfg_present;
-}
-
-bool qemu_fwcfg_dma_present(void)
-{
- return fwcfg_dma_present;
-}
-
-void qemu_fwcfg_read_entry(uint16_t entry, uint32_t length, void *address)
-{
- if (fwcfg_dma_present)
- qemu_fwcfg_read_entry_dma(entry, length, address);
- else
- qemu_fwcfg_read_entry_pio(entry, length, address);
-}
-
-int qemu_fwcfg_online_cpus(void)
-{
- uint16_t nb_cpus;
-
- if (!fwcfg_present)
- return -ENODEV;
-
- qemu_fwcfg_read_entry(FW_CFG_NB_CPUS, 2, &nb_cpus);
-
- return le16_to_cpu(nb_cpus);
-}
-
-/*
- * This function prepares kernel for zboot. It loads kernel data
- * to 'load_addr', initrd to 'initrd_addr' and kernel command
- * line using qemu fw_cfg interface.
- */
-static int qemu_fwcfg_setup_kernel(void *load_addr, void *initrd_addr)
-{
- char *data_addr;
- uint32_t setup_size, kernel_size, cmdline_size, initrd_size;
-
- qemu_fwcfg_read_entry(FW_CFG_SETUP_SIZE, 4, &setup_size);
- qemu_fwcfg_read_entry(FW_CFG_KERNEL_SIZE, 4, &kernel_size);
-
- if (setup_size == 0 || kernel_size == 0) {
- printf("warning: no kernel available\n");
- return -1;
- }
-
- data_addr = load_addr;
- qemu_fwcfg_read_entry(FW_CFG_SETUP_DATA,
- le32_to_cpu(setup_size), data_addr);
- data_addr += le32_to_cpu(setup_size);
-
- qemu_fwcfg_read_entry(FW_CFG_KERNEL_DATA,
- le32_to_cpu(kernel_size), data_addr);
- data_addr += le32_to_cpu(kernel_size);
-
- data_addr = initrd_addr;
- qemu_fwcfg_read_entry(FW_CFG_INITRD_SIZE, 4, &initrd_size);
- if (initrd_size == 0) {
- printf("warning: no initrd available\n");
- } else {
- qemu_fwcfg_read_entry(FW_CFG_INITRD_DATA,
- le32_to_cpu(initrd_size), data_addr);
- data_addr += le32_to_cpu(initrd_size);
- }
-
- qemu_fwcfg_read_entry(FW_CFG_CMDLINE_SIZE, 4, &cmdline_size);
- if (cmdline_size) {
- qemu_fwcfg_read_entry(FW_CFG_CMDLINE_DATA,
- le32_to_cpu(cmdline_size), data_addr);
- /*
- * if kernel cmdline only contains '\0', (e.g. no -append
- * when invoking qemu), do not update bootargs
- */
- if (*data_addr != '\0') {
- if (setenv("bootargs", data_addr) < 0)
- printf("warning: unable to change bootargs\n");
- }
- }
-
- printf("loading kernel to address %p size %x", load_addr,
- le32_to_cpu(kernel_size));
- if (initrd_size)
- printf(" initrd %p size %x\n",
- initrd_addr,
- le32_to_cpu(initrd_size));
- else
- printf("\n");
-
- return 0;
-}
-
-int qemu_fwcfg_read_firmware_list(void)
-{
- int i;
- uint32_t count;
- struct fw_file *file;
- struct list_head *entry;
-
- /* don't read it twice */
- if (!list_empty(&fw_list))
- return 0;
-
- qemu_fwcfg_read_entry(FW_CFG_FILE_DIR, 4, &count);
- if (!count)
- return 0;
-
- count = be32_to_cpu(count);
- for (i = 0; i < count; i++) {
- file = malloc(sizeof(*file));
- if (!file) {
- printf("error: allocating resource\n");
- goto err;
- }
- qemu_fwcfg_read_entry(FW_CFG_INVALID,
- sizeof(struct fw_cfg_file), &file->cfg);
- file->addr = 0;
- list_add_tail(&file->list, &fw_list);
- }
-
- return 0;
-
-err:
- list_for_each(entry, &fw_list) {
- file = list_entry(entry, struct fw_file, list);
- free(file);
- }
-
- return -ENOMEM;
-}
-
-struct fw_file *qemu_fwcfg_find_file(const char *name)
-{
- struct list_head *entry;
- struct fw_file *file;
-
- list_for_each(entry, &fw_list) {
- file = list_entry(entry, struct fw_file, list);
- if (!strcmp(file->cfg.name, name))
- return file;
- }
-
- return NULL;
-}
-
-struct fw_file *qemu_fwcfg_file_iter_init(struct fw_cfg_file_iter *iter)
-{
- iter->entry = fw_list.next;
- return list_entry(iter->entry, struct fw_file, list);
-}
-
-struct fw_file *qemu_fwcfg_file_iter_next(struct fw_cfg_file_iter *iter)
-{
- iter->entry = iter->entry->next;
- return list_entry(iter->entry, struct fw_file, list);
-}
-
-bool qemu_fwcfg_file_iter_end(struct fw_cfg_file_iter *iter)
-{
- return iter->entry == &fw_list;
-}
-
-static int qemu_fwcfg_list_firmware(void)
-{
- int ret;
- struct fw_cfg_file_iter iter;
- struct fw_file *file;
-
- /* make sure fw_list is loaded */
- ret = qemu_fwcfg_read_firmware_list();
- if (ret)
- return ret;
-
-
- for (file = qemu_fwcfg_file_iter_init(&iter);
- !qemu_fwcfg_file_iter_end(&iter);
- file = qemu_fwcfg_file_iter_next(&iter)) {
- printf("%-56s\n", file->cfg.name);
- }
-
- return 0;
-}
-
-void qemu_fwcfg_init(void)
-{
- uint32_t qemu;
- uint32_t dma_enabled;
-
- fwcfg_present = false;
- fwcfg_dma_present = false;
-
- qemu_fwcfg_read_entry_pio(FW_CFG_SIGNATURE, 4, &qemu);
- if (be32_to_cpu(qemu) == QEMU_FW_CFG_SIGNATURE)
- fwcfg_present = true;
-
- if (fwcfg_present) {
- qemu_fwcfg_read_entry_pio(FW_CFG_ID, 1, &dma_enabled);
- if (dma_enabled & FW_CFG_DMA_ENABLED)
- fwcfg_dma_present = true;
- }
-}
-
-static int qemu_fwcfg_do_list(cmd_tbl_t *cmdtp, int flag,
- int argc, char * const argv[])
-{
- if (qemu_fwcfg_list_firmware() < 0)
- return CMD_RET_FAILURE;
-
- return 0;
-}
-
-static int qemu_fwcfg_do_cpus(cmd_tbl_t *cmdtp, int flag,
- int argc, char * const argv[])
-{
- int ret = qemu_fwcfg_online_cpus();
- if (ret < 0) {
- printf("QEMU fw_cfg interface not found\n");
- return CMD_RET_FAILURE;
- }
-
- printf("%d cpu(s) online\n", qemu_fwcfg_online_cpus());
-
- return 0;
-}
-
-static int qemu_fwcfg_do_load(cmd_tbl_t *cmdtp, int flag,
- int argc, char * const argv[])
-{
- char *env;
- void *load_addr;
- void *initrd_addr;
-
- env = getenv("loadaddr");
- load_addr = env ?
- (void *)simple_strtoul(env, NULL, 16) :
- (void *)CONFIG_LOADADDR;
-
- env = getenv("ramdiskaddr");
- initrd_addr = env ?
- (void *)simple_strtoul(env, NULL, 16) :
- (void *)CONFIG_RAMDISK_ADDR;
-
- if (argc == 2) {
- load_addr = (void *)simple_strtoul(argv[0], NULL, 16);
- initrd_addr = (void *)simple_strtoul(argv[1], NULL, 16);
- } else if (argc == 1) {
- load_addr = (void *)simple_strtoul(argv[0], NULL, 16);
- }
-
- return qemu_fwcfg_setup_kernel(load_addr, initrd_addr);
-}
-
-static cmd_tbl_t fwcfg_commands[] = {
- U_BOOT_CMD_MKENT(list, 0, 1, qemu_fwcfg_do_list, "", ""),
- U_BOOT_CMD_MKENT(cpus, 0, 1, qemu_fwcfg_do_cpus, "", ""),
- U_BOOT_CMD_MKENT(load, 2, 1, qemu_fwcfg_do_load, "", ""),
-};
-
-static int do_qemu_fw(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
- int ret;
- cmd_tbl_t *fwcfg_cmd;
-
- if (!qemu_fwcfg_present()) {
- printf("QEMU fw_cfg interface not found\n");
- return CMD_RET_USAGE;
- }
-
- fwcfg_cmd = find_cmd_tbl(argv[1], fwcfg_commands,
- ARRAY_SIZE(fwcfg_commands));
- argc -= 2;
- argv += 2;
- if (!fwcfg_cmd || argc > fwcfg_cmd->maxargs)
- return CMD_RET_USAGE;
-
- ret = fwcfg_cmd->cmd(fwcfg_cmd, flag, argc, argv);
-
- return cmd_process_error(fwcfg_cmd, ret);
-}
-
-U_BOOT_CMD(
- qfw, 4, 1, do_qemu_fw,
- "QEMU firmware interface",
- "<command>\n"
- " - list : print firmware(s) currently loaded\n"
- " - cpus : print online cpu number\n"
- " - load <kernel addr> <initrd addr> : load kernel and initrd (if any), and setup for zboot\n"
-)
diff --git a/common/Kconfig b/common/Kconfig
index 067545d..8ca5a68 100644
--- a/common/Kconfig
+++ b/common/Kconfig
@@ -124,3 +124,4 @@ config CONSOLE_RECORD_IN_SIZE
tstc() and getc() will use this in preference to real device input.
The buffer is allocated immediately after the malloc() region is
ready.
+
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index af8667f..fa53700 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -138,4 +138,10 @@ config WINBOND_W83627
legacy UART or other devices in the Winbond Super IO chips
on X86 platforms.
+config QFW
+ bool
+ help
+ Hidden option to enable QEMU fw_cfg interface. This will be selected by
+ either CONFIG_CMD_QEMU_FW_CFG or CONFIG_GENERATE_ACPI_TABLE.
+
endmenu
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index 5969d34..4893086 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -43,3 +43,4 @@ obj-$(CONFIG_PCA9551_LED) += pca9551_led.o
obj-$(CONFIG_RESET) += reset-uclass.o
obj-$(CONFIG_FSL_DEVICE_DISABLE) += fsl_devdis.o
obj-$(CONFIG_WINBOND_W83627) += winbond_w83627.o
+obj-$(CONFIG_QFW) += qemu_fw_cfg.o
diff --git a/drivers/misc/qemu_fw_cfg.c b/drivers/misc/qemu_fw_cfg.c
new file mode 100644
index 0000000..e726059
--- /dev/null
+++ b/drivers/misc/qemu_fw_cfg.c
@@ -0,0 +1,185 @@
+/*
+ * (C) Copyright 2015 Miao Yan <yanmiaobest at gmail.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <command.h>
+#include <errno.h>
+#include <malloc.h>
+#include <qemu_fw_cfg.h>
+#include <asm/io.h>
+#include <linux/list.h>
+
+static bool fwcfg_present;
+static bool fwcfg_dma_present;
+
+static LIST_HEAD(fw_list);
+
+/* Read configuration item using fw_cfg PIO interface */
+static void qemu_fwcfg_read_entry_pio(uint16_t entry,
+ uint32_t size, void *address)
+{
+ uint32_t i = 0;
+ uint8_t *data = address;
+
+ /*
+ * writting FW_CFG_INVALID will cause read operation to resume at
+ * last offset, otherwise read will start at offset 0
+ */
+ if (entry != FW_CFG_INVALID)
+ outw(entry, FW_CONTROL_PORT);
+ while (size--)
+ data[i++] = inb(FW_DATA_PORT);
+}
+
+/* Read configuration item using fw_cfg DMA interface */
+static void qemu_fwcfg_read_entry_dma(uint16_t entry,
+ uint32_t size, void *address)
+{
+ struct fw_cfg_dma_access dma;
+
+ dma.length = cpu_to_be32(size);
+ dma.address = cpu_to_be64((uintptr_t)address);
+ dma.control = cpu_to_be32(FW_CFG_DMA_READ);
+
+ /*
+ * writting FW_CFG_INVALID will cause read operation to resume at
+ * last offset, otherwise read will start at offset 0
+ */
+ if (entry != FW_CFG_INVALID)
+ dma.control |= cpu_to_be32(FW_CFG_DMA_SELECT | (entry << 16));
+
+ barrier();
+
+ debug("qemu_fwcfg_dma_read_entry: addr %p, length %u control 0x%x\n",
+ address, size, be32_to_cpu(dma.control));
+
+ outl(cpu_to_be32((uint32_t)&dma), FW_DMA_PORT_HIGH);
+
+ while (be32_to_cpu(dma.control) & ~FW_CFG_DMA_ERROR)
+ __asm__ __volatile__ ("pause");
+}
+
+bool qemu_fwcfg_present(void)
+{
+ return fwcfg_present;
+}
+
+bool qemu_fwcfg_dma_present(void)
+{
+ return fwcfg_dma_present;
+}
+
+void qemu_fwcfg_read_entry(uint16_t entry, uint32_t length, void *address)
+{
+ if (fwcfg_dma_present)
+ qemu_fwcfg_read_entry_dma(entry, length, address);
+ else
+ qemu_fwcfg_read_entry_pio(entry, length, address);
+}
+
+int qemu_fwcfg_online_cpus(void)
+{
+ uint16_t nb_cpus;
+
+ if (!fwcfg_present)
+ return -ENODEV;
+
+ qemu_fwcfg_read_entry(FW_CFG_NB_CPUS, 2, &nb_cpus);
+
+ return le16_to_cpu(nb_cpus);
+}
+
+int qemu_fwcfg_read_firmware_list(void)
+{
+ int i;
+ uint32_t count;
+ struct fw_file *file;
+ struct list_head *entry;
+
+ /* don't read it twice */
+ if (!list_empty(&fw_list))
+ return 0;
+
+ qemu_fwcfg_read_entry(FW_CFG_FILE_DIR, 4, &count);
+ if (!count)
+ return 0;
+
+ count = be32_to_cpu(count);
+ for (i = 0; i < count; i++) {
+ file = malloc(sizeof(*file));
+ if (!file) {
+ printf("error: allocating resource\n");
+ goto err;
+ }
+ qemu_fwcfg_read_entry(FW_CFG_INVALID,
+ sizeof(struct fw_cfg_file), &file->cfg);
+ file->addr = 0;
+ list_add_tail(&file->list, &fw_list);
+ }
+
+ return 0;
+
+err:
+ list_for_each(entry, &fw_list) {
+ file = list_entry(entry, struct fw_file, list);
+ free(file);
+ }
+
+ return -ENOMEM;
+}
+
+struct fw_file *qemu_fwcfg_find_file(const char *name)
+{
+ struct list_head *entry;
+ struct fw_file *file;
+
+ list_for_each(entry, &fw_list) {
+ file = list_entry(entry, struct fw_file, list);
+ if (!strcmp(file->cfg.name, name))
+ return file;
+ }
+
+ return NULL;
+}
+
+struct fw_file *qemu_fwcfg_file_iter_init(struct fw_cfg_file_iter *iter)
+{
+ iter->entry = fw_list.next;
+ return list_entry((struct list_head *)iter->entry,
+ struct fw_file, list);
+}
+
+struct fw_file *qemu_fwcfg_file_iter_next(struct fw_cfg_file_iter *iter)
+{
+ iter->entry = ((struct list_head *)iter->entry)->next;
+ return list_entry((struct list_head *)iter->entry,
+ struct fw_file, list);
+}
+
+bool qemu_fwcfg_file_iter_end(struct fw_cfg_file_iter *iter)
+{
+ return iter->entry == &fw_list;
+}
+
+void qemu_fwcfg_init(void)
+{
+ uint32_t qemu;
+ uint32_t dma_enabled;
+
+ fwcfg_present = false;
+ fwcfg_dma_present = false;
+
+ qemu_fwcfg_read_entry_pio(FW_CFG_SIGNATURE, 4, &qemu);
+ if (be32_to_cpu(qemu) == QEMU_FW_CFG_SIGNATURE)
+ fwcfg_present = true;
+
+ if (fwcfg_present) {
+ qemu_fwcfg_read_entry_pio(FW_CFG_ID, 1, &dma_enabled);
+ if (dma_enabled & FW_CFG_DMA_ENABLED)
+ fwcfg_dma_present = true;
+ }
+}
+
--
1.9.1
More information about the U-Boot
mailing list