[U-Boot] [PATCH v2 0/5] Malta UART using device model & device tree

Paul Burton paul.burton at imgtec.com
Mon May 16 19:44:34 CEST 2016


This series converts the MIPS Malta development board to make use of
device model & device tree to probe the UART. This results in a tidier
way to handle differences between Malta boards & starts Malta on the
path to device model conversion.

Paul Burton (5):
  fdt: Support for ISA busses
  fdt: Document the rest of struct of_bus
  dm: ns16550: Don't map_physmem for I/O ports
  malta: Tidy up UART address selection
  malta: Use device model & tree for UART

 arch/mips/Kconfig           |   5 ++
 arch/mips/dts/Makefile      |   3 +-
 arch/mips/dts/mti,malta.dts |  32 ++++++++++++
 board/imgtec/malta/malta.c  |  13 -----
 common/fdt_support.c        | 120 ++++++++++++++++++++++++++++++++++++++++++--
 configs/malta_defconfig     |   1 +
 configs/maltael_defconfig   |   1 +
 drivers/core/Kconfig        |  23 +++++++++
 drivers/serial/ns16550.c    |   8 +++
 include/configs/malta.h     |   8 +--
 10 files changed, 190 insertions(+), 24 deletions(-)
 create mode 100644 arch/mips/dts/mti,malta.dts

-- 
2.8.2



More information about the U-Boot mailing list