[U-Boot] [RFC PATCH] test/py: Add experimental code for mmc testing
Michal Simek
michal.simek at xilinx.com
Tue May 17 16:09:47 CEST 2016
More partitions are handled.
Save information about saved file to structure.
Also use fs_generic commands to handle files.
Support fat, ext2 and ext4 filesystems.
Signed-off-by: Michal Simek <michal.simek at xilinx.com>
---
Code for work with partitions and FS is quite generic that the same
stuff can be used for others(USB, SATA, etc.).
Maybe it is good to move these FS tests to specific functions and call
them with different device.
Thanks for your comments.
---
test/py/tests/test_mmc.py | 521 ++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 521 insertions(+)
create mode 100644 test/py/tests/test_mmc.py
diff --git a/test/py/tests/test_mmc.py b/test/py/tests/test_mmc.py
new file mode 100644
index 000000000000..96231e96b292
--- /dev/null
+++ b/test/py/tests/test_mmc.py
@@ -0,0 +1,521 @@
+#
+# Copyright (c) 2016 Michal Simek
+#
+# SPDX-License-Identifier: GPL-2.0
+
+import pytest
+import random
+import re
+import u_boot_utils
+
+mmc_set_up = False
+controllers = 0
+devices = {}
+
+ at pytest.mark.buildconfigspec("cmd_mmc")
+def test_mmc_list(u_boot_console):
+ output = u_boot_console.run_command("mmc list")
+ if "No MMC device available" in output:
+ pytest.skip('No SD/MMC/eMMC controller available')
+
+ array = output.split( )
+
+ global devices
+ global controllers
+ controllers = len(array) / 2
+ for x in range(0, controllers):
+ y = x * 2
+ devices[x] = {}
+ devices[x]["name"] = array[y]
+
+ global mmc_set_up
+ mmc_set_up = True
+
+ at pytest.mark.buildconfigspec("cmd_mmc")
+def test_mmc_dev(u_boot_console):
+ if not mmc_set_up:
+ pytest.skip('No SD/MMC/eMMC controller available')
+
+ fail = 0
+ for x in range(0, controllers):
+ output = u_boot_console.run_command('mmc dev %d' % x)
+
+ # Some sort of switch here
+ if "Card did not respond to voltage select" in output:
+ fail = 1
+ devices[x]["detected"] = "no"
+ else:
+ devices[x]["detected"] = "yes"
+
+ if fail:
+ pytest.fail("Card not present")
+
+ at pytest.mark.buildconfigspec("cmd_mmc")
+def test_mmcinfo(u_boot_console):
+ if not mmc_set_up:
+ pytest.skip('No SD/MMC/eMMC controller available')
+
+ for x in range(0, controllers):
+ if devices[x]["detected"] == "yes":
+ u_boot_console.run_command('mmc dev %d' % x)
+ output = u_boot_console.run_command("mmcinfo")
+ if "busy timeout" in output:
+ pytest.skip('No SD/MMC/eMMC device present')
+
+ obj = re.search(r'Capacity: (\d+[\.]?\d)', output)
+ try:
+ capacity = float(obj.groups()[0])
+ print capacity
+ devices[x]["capacity"] = capacity
+ print ("Capacity of dev %d is: %g GiB" % (x, capacity))
+ except ValueError:
+ pytest.fail("MMC capacity not recognized")
+
+ at pytest.mark.buildconfigspec("cmd_mmc")
+def test_mmc_info(u_boot_console):
+ if not mmc_set_up:
+ pytest.skip('No SD/MMC/eMMC controller available')
+
+ for x in range(0, controllers):
+ if devices[x]["detected"] == "yes":
+ u_boot_console.run_command('mmc dev %d' % x)
+
+ output = u_boot_console.run_command("mmc info")
+
+ obj = re.search(r'Capacity: (\d+[\.]?\d)', output)
+ try:
+ capacity = float(obj.groups()[0])
+ print capacity
+ if devices[x]["capacity"] != capacity:
+ pytest.fail("MMC capacity doesn't match mmcinfo")
+
+ except ValueError:
+ pytest.fail("MMC capacity not recognized")
+
+ at pytest.mark.buildconfigspec("cmd_mmc")
+def test_mmc_rescan(u_boot_console):
+ if not mmc_set_up:
+ pytest.skip('No SD/MMC/eMMC controller available')
+
+ if not devices:
+ pytest.skip('No devices detected')
+
+ for x in range(0, controllers):
+ if devices[x]["detected"] == "yes":
+ u_boot_console.run_command('mmc dev %d' % x)
+ output = u_boot_console.run_command("mmc rescan")
+ # Not sure if this can be any error
+ if output:
+ pytest.fail("mmc rescan has something to check")
+
+
+ at pytest.mark.buildconfigspec("cmd_mmc")
+def test_mmc_part(u_boot_console):
+ if not mmc_set_up:
+ pytest.skip('No SD/MMC/eMMC controller available')
+
+ if not devices:
+ pytest.skip('No devices detected')
+
+ for x in range(0, controllers):
+ if devices[x]["detected"] == "yes":
+ u_boot_console.run_command('mmc dev %d' % x)
+ output = u_boot_console.run_command("mmc part")
+
+ lines = output.split("\n")
+ part_fat = []
+ part_ext = []
+ for line in lines:
+ obj = re.search(r'(\d)\s+\d+\s+\d+\s+\w+\d+\w+-\d+\s+(\d+\w+)', line)
+ if obj:
+ part_id = int(obj.groups()[0])
+ part_type = obj.groups()[1]
+ print ("part_id:%d, part_type:%s" % (part_id, part_type))
+
+ if part_type == '0c' or part_type == '0b' or part_type == '0e':
+ print "Fat detected"
+ part_fat.append(part_id)
+ elif part_type == '83':
+ print "ext detected"
+ part_ext.append(part_id)
+ else:
+ pytest.fail("Unsupported Filesystem on device %d" % x)
+ devices[x]["ext4"] = part_ext
+ devices[x]["ext2"] = part_ext
+ devices[x]["fat"] = part_fat
+
+ if not part_ext and not part_fat:
+ pytest.fail("No partition detected on device %d" %x)
+
+ at pytest.mark.buildconfigspec("cmd_mmc")
+ at pytest.mark.buildconfigspec("cmd_fat")
+def test_mmc_fatls_fatinfo(u_boot_console):
+ if not mmc_set_up:
+ pytest.skip('No SD/MMC/eMMC controller available')
+
+ if not devices:
+ pytest.skip('No devices detected')
+
+ part_detect = 0
+ fs = "fat"
+ for x in range(0, controllers):
+ if devices[x]["detected"] == "yes":
+ u_boot_console.run_command('mmc dev %d' % x)
+ try:
+ partitions = devices[x][fs]
+ except:
+ print ("No %s table on this device" % fs.upper());
+ continue
+
+ for part in partitions:
+ output = u_boot_console.run_command("fatls mmc %d:%s" % (x, part))
+ if "Unrecognized filesystem type" in output:
+ partitions.remove(part)
+ pytest.fail("Unrecognized filesystem")
+
+ if not re.search("\d file\(s\), \d dir\(s\)", output):
+ pytest.fail("%s read failed on device %d" % (fs.upper, x))
+ # Maybe separate this usecase
+ # Also maybe detect not readable chars
+ output = u_boot_console.run_command("fatinfo mmc %d:%s" % (x, part))
+ string = "Filesystem: %s" % fs.upper
+ if re.search(string, output):
+ pytest.fail("%s FS failed on device %d" % (fs.upper(), x))
+ part_detect = 1
+
+ if not part_detect:
+ pytest.skip("No %s partition detected" % fs.upper())
+
+ at pytest.mark.buildconfigspec("cmd_mmc")
+ at pytest.mark.buildconfigspec("cmd_fat")
+ at pytest.mark.buildconfigspec('cmd_memory')
+def test_mmc_fatload_fatwrite(u_boot_console):
+ if not mmc_set_up:
+ pytest.skip('No SD/MMC/eMMC controller available')
+
+ if not devices:
+ pytest.skip('No devices detected')
+
+ part_detect = 0
+ fs = "fat"
+ for x in range(0, controllers):
+ if devices[x]["detected"] == "yes":
+ u_boot_console.run_command('mmc dev %d' % x)
+ try:
+ partitions = devices[x][fs]
+ except:
+ print ("No %s table on this device" % fs.upper());
+ continue
+
+ for part in partitions:
+ part_detect = 1
+ addr = u_boot_utils.find_ram_base(u_boot_console)
+ devices[x]["addr_%d" % part] = addr
+ size = random.randint(4, 1 * 1024 * 1024)
+ devices[x]["size_%d" % part] = size
+ # count CRC32
+ output = u_boot_console.run_command('crc32 %x %x' % (addr, size))
+ m = re.search('==> (.+?)', output)
+ if not m:
+ pytest.fail("CRC32 failed")
+ expected_crc32 = m.group(1)
+ devices[x]["expected_crc32_%d" % part] = expected_crc32
+ # do write
+
+ file = '%s_%d' % ("uboot_test", size)
+ devices[x]["file_%d" % part] = file
+ output = u_boot_console.run_command("%swrite mmc %d:%s %x %s %x" % (fs, x, part, addr, file, size))
+ assert "Unable to write" not in output
+ assert "Error" not in output
+ assert "overflow" not in output
+ expected_text = "%d bytes written" % size
+ assert expected_text in output
+
+ alignment = int(u_boot_console.config.buildconfig.get('config_sys_cacheline_size', 128))
+ offset = random.randrange(alignment, 1024, alignment)
+ output = u_boot_console.run_command("%sload mmc %d:%s %x %s" % (fs, x, part, addr + offset, file))
+ assert "Invalid FAT entry" not in output
+ assert "Unable to read file" not in output
+ assert "Misaligned buffer address" not in output
+ expected_text = "%d bytes read" % size
+ assert expected_text in output
+
+ output = u_boot_console.run_command('crc32 %x $filesize' % (addr + offset))
+ assert expected_crc32 in output
+
+ if not part_detect:
+ pytest.skip("No %s partition detected" % fs.upper())
+
+ at pytest.mark.buildconfigspec("cmd_mmc")
+ at pytest.mark.buildconfigspec("cmd_ext4")
+def test_mmc_ext4ls(u_boot_console):
+ if not mmc_set_up:
+ pytest.skip('No SD/MMC/eMMC controller available')
+
+ if not devices:
+ pytest.skip('No devices detected')
+
+ part_detect = 0
+ fs = "ext4"
+ for x in range(0, controllers):
+ if devices[x]["detected"] == "yes":
+ try:
+ partitions = devices[x][fs]
+ except:
+ print ("No %s table on this device" % fs.upper());
+ continue
+
+ u_boot_console.run_command('mmc dev %d' % x)
+ for part in partitions:
+ output = u_boot_console.run_command("%sls mmc %d:%s" % (fs, x, part))
+ if "Unrecognized filesystem type" in output:
+ partitions.remove(part)
+ pytest.fail("Unrecognized filesystem")
+ part_detect = 1
+
+ if not part_detect:
+ pytest.skip("No %s partition detected" % fs.upper())
+
+ at pytest.mark.buildconfigspec("cmd_mmc")
+ at pytest.mark.buildconfigspec("cmd_ext4")
+ at pytest.mark.buildconfigspec("ext4_write")
+ at pytest.mark.buildconfigspec('cmd_memory')
+def test_mmc_ext4load_ext4write(u_boot_console):
+ if not mmc_set_up:
+ pytest.skip('No SD/MMC/eMMC controller available')
+
+ if not devices:
+ pytest.skip('No devices detected')
+
+ part_detect = 0
+ fs = "ext4"
+ for x in range(0, controllers):
+ if devices[x]["detected"] == "yes":
+ u_boot_console.run_command('mmc dev %d' % x)
+ try:
+ partitions = devices[x][fs]
+ except:
+ print ("No %s table on this device" % fs.upper());
+ continue
+
+ for part in partitions:
+ part_detect = 1
+ addr = u_boot_utils.find_ram_base(u_boot_console)
+ devices[x]["addr_%d" % part] = addr
+ size = random.randint(4, 1 * 1024 * 1024)
+ devices[x]["size_%d" % part] = size
+ # count CRC32
+ output = u_boot_console.run_command('crc32 %x %x' % (addr, size))
+ m = re.search('==> (.+?)', output)
+ if not m:
+ pytest.fail("CRC32 failed")
+ expected_crc32 = m.group(1)
+ devices[x]["expected_crc32_%d" % part] = expected_crc32
+ # do write
+
+ file = '%s_%d' % ("uboot_test", size)
+ devices[x]["file_%d" % part] = file
+ output = u_boot_console.run_command("%swrite mmc %d:%s %x /%s %x" % (fs, x, part, addr, file, size))
+ assert "Unable to write" not in output
+ assert "Error" not in output
+ # maybe not valid for ext4
+ assert "overflow" not in output
+ expected_text = "%d bytes written" % size
+ assert expected_text in output
+
+ # Read it back with 64 aligned offset
+ # Todo read ALIGN
+ offset = random.randrange(128, 1024, 128)
+ output = u_boot_console.run_command("%sload mmc %d:%s %x /%s" % (fs, x, part, addr + offset, file))
+ expected_text = "%d bytes read" % size
+ assert expected_text in output
+
+ output = u_boot_console.run_command('crc32 %x $filesize' % (addr + offset))
+ assert expected_crc32 in output
+
+ if not part_detect:
+ pytest.skip("No %s partition detected" % fs.upper())
+
+ at pytest.mark.buildconfigspec("cmd_mmc")
+ at pytest.mark.buildconfigspec("cmd_ext2")
+def test_mmc_ext2ls(u_boot_console):
+ if not mmc_set_up:
+ pytest.skip('No SD/MMC/eMMC controller available')
+
+ if not devices:
+ pytest.skip('No devices detected')
+
+ part_detect = 0
+ fs = "ext2"
+ for x in range(0, controllers):
+ if devices[x]["detected"] == "yes":
+ u_boot_console.run_command('mmc dev %d' % x)
+ try:
+ partitions = devices[x][fs]
+ except:
+ print ("No %s table on this device" % fs.upper());
+ continue
+
+ for part in partitions:
+ part_detect = 1
+ output = u_boot_console.run_command("%sls mmc %d:%s" % (fs, x, part))
+ if "Unrecognized filesystem type" in output:
+ partitions.remove(part)
+ pytest.fail("Unrecognized filesystem")
+ part_detect = 1
+
+ if not part_detect:
+ pytest.skip("No %s partition detected" % fs.upper())
+
+ at pytest.mark.buildconfigspec("cmd_mmc")
+ at pytest.mark.buildconfigspec("cmd_ext2")
+ at pytest.mark.buildconfigspec("cmd_ext4")
+ at pytest.mark.buildconfigspec("ext4_write")
+ at pytest.mark.buildconfigspec('cmd_memory')
+def test_mmc_ext2load(u_boot_console):
+ if not mmc_set_up:
+ pytest.skip('No SD/MMC/eMMC controller available')
+
+ if not devices:
+ pytest.skip('No devices detected')
+
+ part_detect = 0
+ fs = "ext2"
+ for x in range(0, controllers):
+ if devices[x]["detected"] == "yes":
+ u_boot_console.run_command('mmc dev %d' % x)
+ try:
+ partitions = devices[x][fs]
+ except:
+ print ("No %s table on this device" % fs.upper());
+ continue
+
+ for part in partitions:
+ part_detect = 1
+ # Have to share information about ext4 file which was written
+ # Maybe just choose whatever available file
+ addr = devices[x]["addr_%d" % part]
+ size = devices[x]["size_%d" % part]
+ expected_crc32 = devices[x]["expected_crc32_%d" % part]
+ file = devices[x]["file_%d" % part]
+
+ # Read it back with 64 aligned offset
+ # Todo read ALIGN
+ offset = random.randrange(128, 1024, 128)
+ output = u_boot_console.run_command("%sload mmc %d:%s %x /%s" % (fs, x, part, addr + offset, file))
+ expected_text = "%d bytes read" % size
+ assert expected_text in output
+
+ output = u_boot_console.run_command('crc32 %x $filesize' % (addr + offset))
+ assert expected_crc32 in output
+
+ if not part_detect:
+ pytest.skip("No %s partition detected" % fs.upper())
+
+ at pytest.mark.buildconfigspec("cmd_mmc")
+ at pytest.mark.buildconfigspec("cmd_fs_generic")
+def test_mmc_ls(u_boot_console):
+ if not mmc_set_up:
+ pytest.skip('No SD/MMC/eMMC controller available')
+
+ if not devices:
+ pytest.skip('No devices detected')
+
+ part_detect = 0
+ for x in range(0, controllers):
+ if devices[x]["detected"] == "yes":
+ u_boot_console.run_command('mmc dev %d' % x)
+ for fs in ['fat', 'ext4']:
+ try:
+ partitions = devices[x][fs]
+ except:
+ print ("No %s table on this device" % fs.upper());
+ continue
+
+ for part in partitions:
+ part_detect = 1
+ output = u_boot_console.run_command("ls mmc %d:%s" % (x, part))
+ if re.search("No \w+ table on this device", output):
+ pytest.fail("%s: Partition table not found %d" % (fs.upper(), x))
+
+ if not part_detect:
+ pytest.skip("No partition detected")
+
+ at pytest.mark.buildconfigspec("cmd_mmc")
+ at pytest.mark.buildconfigspec("cmd_fs_generic")
+def test_mmc_load(u_boot_console):
+ if not mmc_set_up:
+ pytest.skip('No SD/MMC/eMMC controller available')
+
+ if not devices:
+ pytest.skip('No devices detected')
+
+ part_detect = 0
+ for x in range(0, controllers):
+ if devices[x]["detected"] == "yes":
+ u_boot_console.run_command('mmc dev %d' % x)
+ for fs in ['fat', 'ext4']:
+ try:
+ partitions = devices[x][fs]
+ except:
+ print ("No %s table on this device" % fs.upper());
+ continue
+
+ for part in partitions:
+ part_detect = 1
+ # Have to share information about ext4 file which was written
+ # Maybe just choose whatever available file
+ addr = devices[x]["addr_%d" % part]
+ size = devices[x]["size_%d" % part]
+ expected_crc32 = devices[x]["expected_crc32_%d" % part]
+ file = devices[x]["file_%d" % part]
+
+ # Read it back with 64 aligned offset
+ # Todo read ALIGN
+ offset = random.randrange(128, 1024, 128)
+ output = u_boot_console.run_command("load mmc %d:%s %x /%s" % (x, part, addr + offset, file))
+ expected_text = "%d bytes read" % size
+ assert expected_text in output
+
+ output = u_boot_console.run_command('crc32 %x $filesize' % (addr + offset))
+ assert expected_crc32 in output
+
+ if not part_detect:
+ pytest.skip("No partition detected")
+
+ at pytest.mark.buildconfigspec("cmd_mmc")
+ at pytest.mark.buildconfigspec("cmd_fs_generic")
+def test_mmc_save(u_boot_console):
+ if not mmc_set_up:
+ pytest.skip('No SD/MMC/eMMC controller available')
+
+ if not devices:
+ pytest.skip('No devices detected')
+
+ part_detect = 0
+ for x in range(0, controllers):
+ if devices[x]["detected"] == "yes":
+ u_boot_console.run_command('mmc dev %d' % x)
+ for fs in ['fat', 'ext4']:
+ try:
+ partitions = devices[x][fs]
+ except:
+ print ("No %s table on this device" % fs.upper());
+ continue
+
+ for part in partitions:
+ part_detect = 1
+ addr = devices[x]["addr_%d" % part]
+ # Delete file not to have too many files on cards
+ size = 0
+ file = devices[x]["file_%d" % part]
+
+ # Read it back with 64 aligned offset
+ # Todo read ALIGN
+ offset = random.randrange(128, 1024, 128)
+ output = u_boot_console.run_command("save mmc %d:%s %x /%s %d" % (x, part, addr + offset, file, size))
+ expected_text = "%d bytes written" % size
+ assert expected_text in output
+
+ if not part_detect:
+ pytest.skip("No partition detected")
--
1.9.1
More information about the U-Boot
mailing list