[U-Boot] [PATCH v2] armv8/ls2080ardb: Update DDR timing to support more UDIMMs

York Sun york.sun at nxp.com
Tue May 17 18:25:40 CEST 2016


On 05/05/2016 12:29 PM, York Sun wrote:
> On 04/06/2016 11:50 PM, Shengzhou Liu wrote:
>> Optimize DDR timing for good margins to support new Transcend
>> and Apacer DDR4 UDIMM besides current Micron UDIMM.
>>
>> Verified 1333MT/s, 1600MT/s, 1866MT/s, 2133MT/s rate with
>> following UDIMM on LS2080ARDB.
>>  - Micron UDIMM: MTA18ASF1G72AZ-2G1A1Z
>>  - Apacer UDIMM: 78.C1GM4.AF10B
>>  - Transcend UDIMM: TS1GLH72V1H
>>
>> Signed-off-by: Shengzhou Liu <Shengzhou.Liu at nxp.com>
>> ---
>> v2: verified lower rate, for 1333MT/s no changes are necessary. 
>>
>>  board/freescale/ls2080ardb/ddr.h | 6 +++---
>>  1 file changed, 3 insertions(+), 3 deletions(-)
>>
>> diff --git a/board/freescale/ls2080ardb/ddr.h b/board/freescale/ls2080ardb/ddr.h
>> index bda9d4a..b3c6306 100644
>> --- a/board/freescale/ls2080ardb/ddr.h
>> +++ b/board/freescale/ls2080ardb/ddr.h
>> @@ -29,9 +29,9 @@ static const struct board_specific_parameters udimm0[] = {
>>  	 * ranks| mhz| GB  |adjst| start |   ctl2    |  ctl3
>>  	 */
>>  	{2,  1350, 0, 4,     6, 0x0708090B, 0x0C0D0E09,},
>> -	{2,  1666, 0, 4,     8, 0x08090B0D, 0x0E10100C,},
>> -	{2,  1900, 0, 4,     8, 0x090A0C0E, 0x1012120D,},
>> -	{2,  2300, 0, 4,     9, 0x0A0B0C10, 0x1114140E,},
>> +	{2,  1666, 0, 5,     9, 0x090A0B0E, 0x0F11110C,},
>> +	{2,  1900, 0, 6,   0xA, 0x0B0C0E11, 0x1214140F,},
>> +	{2,  2300, 0, 6,   0xB, 0x0C0D0F12, 0x14161610,},
>>  	{}
>>  };
>>  
>>
> 
> Shengzhou,
> 
> I see a problem with this patch on one LS2085ARDB board, at 1866MT/s with
> MT18ASF1G72AZ-2G1A1. Please try it yourself on ls2085rdb-3 (ATX boardfarm). My
> order of patches are
> 
> http://patchwork.ozlabs.org/patch/607290/
> http://patchwork.ozlabs.org/patch/598135/
> http://patchwork.ozlabs.org/patch/598136/
> http://patchwork.ozlabs.org/patch/607274/
> 
> My test code base is master branch bbca7108db79076d3a9a9c112792d7c4608a665c.
> 

Shengzhou,

I rebased the code and repeated the tests on the same board but seeing no issue now.

York



More information about the U-Boot mailing list