[U-Boot] [PATCH] test/py: Detect timeout in phy negotiation

[Michal Simek]

On 17.5.2016 19:00, Stephen Warren wrote:
> On 05/17/2016 10:56 AM, Michal Simek wrote:
>> Hi Stephen,
>>
>> On 17.5.2016 18:50, Stephen Warren wrote:
>>> On 05/17/2016 07:57 AM, Michal Simek wrote:
>>>> If timeout happen it should be reported as fault.
>>>
>>> Presumably if a timeout occurs, the expected text does not appear, i.e.
>>> the existing assert fails anyway?
>>>
>>> Anyway, it's useful to point out problems explicitly, so,
>>> Acked-by: Stephen Warren <swarren at nvidia.com>
>>
>> Unfortunately I found this issue when I was checking logs where I am
>> getting this.
>>
>> ethernet at e000b000 Waiting for PHY auto negotiation to complete.........
>> TIMEOUT !
>> BOOTP broadcast 1
>> BOOTP broadcast 2
>> BOOTP broadcast 3
>> DHCP client bound to address 192.168.0.107 (882 ms)
>> Zynq> .Zynq> setenv serverip 192.168.0.105
>>
>> I haven't looked at the exact reason why it is failing but IMHO it is
>> worth to check.
> 
> Oh, in that case I think I should withdraw my ack; in the log above, the
> operation completed successfully, so I'm not convinced the test should
> be marked a failure. I thought this change simply provided more detail
> re: the cause of a test failure.

Is there any other way how to run just phy negotiation and mark this
test as fail?

Thanks
Michal