[U-Boot] [PATCH] phy: marvell: Do not reset phy after negotiation

[Michal Simek]

The patch
"net: phy: do not read configuration register on reset"
(sha1: a058052c358c3ecf5f394ff37def6a45eb26768c)
was causing regression on zynq zc702 board where Marwell 88e1118
phy was resetted after negotiation was setup.
Phy reset is done pretty early in phy_connect_dev() and doens't need to
be called again in phy code.

Signed-off-by: Michal Simek <michal.simek at xilinx.com>
---

I would expect that more phys are affected by this but I am not able to
test them.

---
 drivers/net/phy/marvell.c | 6 +-----
 1 file changed, 1 insertion(+), 5 deletions(-)

diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c
index 64713fbaebf4..d2e68d492a67 100644
--- a/drivers/net/phy/marvell.c
+++ b/drivers/net/phy/marvell.c
@@ -352,11 +352,7 @@ static int m88e1118_config(struct phy_device *phydev)
 	/* Change Page Number */
 	phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1118_PHY_PAGE, 0x0000);
 
-	genphy_config_aneg(phydev);
-
-	phy_reset(phydev);
-
-	return 0;
+	return genphy_config_aneg(phydev);
 }
 
 static int m88e1118_startup(struct phy_device *phydev)
-- 
1.9.1