[U-Boot] [PATCH v3 3/7] ARMv8/ls1043ardb: Integrate FSL PPA

[Zhiqiang Hou]

Hi York,

Thanks for your comments and sorry for my delay response due to PTO.

> -----Original Message-----
> From: York Sun [mailto:york.sun at nxp.com]
> Sent: 2016年5月11日 3:48
> To: Zhiqiang Hou <zhiqiang.hou at nxp.com>; u-boot at lists.denx.de;
> albert.u.boot at aribaud.net; scottwood at freescale.com;
> Mingkai.hu at freescale.com; yorksun at freescale.com; leoli at freescale.com;
> prabhakar at freescale.com; bhupesh.sharma at freescale.com
> Cc: Hou Zhiqiang <Zhiqiang.Hou at freescale.com>
> Subject: Re: [PATCH v3 3/7] ARMv8/ls1043ardb: Integrate FSL PPA
> 
> On 04/27/2016 06:49 AM, Zhiqiang Hou wrote:
> > From: Hou Zhiqiang <Zhiqiang.Hou at freescale.com>
> >
> > Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou at freescale.com>
> > ---
> > V3:
> >  - no change
> >
> >  board/freescale/ls1043ardb/ls1043ardb.c | 11 +++++++++++
> >  include/configs/ls1043ardb.h            |  9 +++++++++
> >  2 files changed, 20 insertions(+)
> >
> > diff --git a/board/freescale/ls1043ardb/ls1043ardb.c
> > b/board/freescale/ls1043ardb/ls1043ardb.c
> > index ec5fdbf..5f0a8e7 100644
> > --- a/board/freescale/ls1043ardb/ls1043ardb.c
> > +++ b/board/freescale/ls1043ardb/ls1043ardb.c
> > @@ -9,6 +9,7 @@
> >  #include <asm/io.h>
> >  #include <asm/arch/clock.h>
> >  #include <asm/arch/fsl_serdes.h>
> > +#include <asm/arch/ppa.h>
> >  #include <asm/arch/soc.h>
> >  #include <fdt_support.h>
> >  #include <hwconfig.h>
> > @@ -84,6 +85,9 @@ int board_early_init_f(void)  int board_init(void)
> > {
> >  	struct ccsr_cci400 *cci = (struct ccsr_cci400
> > *)CONFIG_SYS_CCI400_ADDR;
> > +#ifdef CONFIG_FSL_LS_PPA
> > +	u64 ppa_entry;
> > +#endif
> >
> >  	/*
> >  	 * Set CCI-400 control override register to enable barrier @@ -103,6
> > +107,13 @@ int board_init(void)
> >  	enable_layerscape_ns_access();
> >  #endif
> >
> > +#ifdef CONFIG_FSL_LS_PPA
> > +	ppa_init_pre(&ppa_entry);
> > +
> > +	if (ppa_entry)
> > +		ppa_init_entry((void *)ppa_entry);
> 
> ppa_init_pre() returns the error code. Why don't you use the return value here?

The function ppa_init_pre() will set the ppa_entry to 0x0 if any error occurred.

Thanks,
Zhiqiang