[U-Boot] [PATCH 1/4] mmc: fsl_esdhc: don't set XFERTYP_RSPTYP_48_BUSY for CMD with busy response

[Yangbo Lu]

For CMD with busy response, the eSDHC driver would poll DAT0 until
CMD completion rather than polling IRQSTAT. So, don't set
XFERTYP_RSPTYP_48_BUSY to avoid interrupts (DTOE or TC) in IRQSTAT.

Signed-off-by: Yangbo Lu <yangbo.lu at nxp.com>
---
 drivers/mmc/fsl_esdhc.c | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

diff --git a/drivers/mmc/fsl_esdhc.c b/drivers/mmc/fsl_esdhc.c
index 3acf9e8..b06dd69 100644
--- a/drivers/mmc/fsl_esdhc.c
+++ b/drivers/mmc/fsl_esdhc.c
@@ -126,8 +126,16 @@ static uint esdhc_xfertyp(struct mmc_cmd *cmd, struct mmc_data *data)
 		xfertyp |= XFERTYP_CICEN;
 	if (cmd->resp_type & MMC_RSP_136)
 		xfertyp |= XFERTYP_RSPTYP_136;
-	else if (cmd->resp_type & MMC_RSP_BUSY)
-		xfertyp |= XFERTYP_RSPTYP_48_BUSY;
+	/*
+	 * For CMD with busy response, the eSDHC driver would poll DAT0
+	 * until CMD completion rather than polling IRQSTAT. So, don't
+	 * set XFERTYP_RSPTYP_48_BUSY to avoid interrupts (DTOE or TC)
+	 * in IRQSTAT.
+	 *
+	 * Remove:
+	 * else if (cmd->resp_type & MMC_RSP_BUSY)
+	 *      xfertyp |= XFERTYP_RSPTYP_48_BUSY;
+	 */
 	else if (cmd->resp_type & MMC_RSP_PRESENT)
 		xfertyp |= XFERTYP_RSPTYP_48;
 
-- 
2.1.0.27.g96db324