[U-Boot] [PATCH 02/15] x86: crownbay: Disable boot stage support

[Bin Meng]

It is observed that when enabling boot stage support, occasionally
the board reboots during boot over and over again, and eventually
boots to shell. This was seen on my board, but not on Jian's board.
Debugging shows that the TSC timer calibration against PIT fails
as boot stage APIs utilize timer in a very early stage and at that
time TSC/PIT may not be stable enough for the calibration to pass.

Disable it for now.

Signed-off-by: Bin Meng <bmeng.cn at gmail.com>
Cc: Jian Luo <Jian.Luo4 at boschrexroth.de>
---

 configs/crownbay_defconfig | 3 ---
 1 file changed, 3 deletions(-)

diff --git a/configs/crownbay_defconfig b/configs/crownbay_defconfig
index 7c6b692..8e086c5 100644
--- a/configs/crownbay_defconfig
+++ b/configs/crownbay_defconfig
@@ -8,8 +8,6 @@ CONFIG_HAVE_VGA_BIOS=y
 CONFIG_GENERATE_PIRQ_TABLE=y
 CONFIG_GENERATE_MP_TABLE=y
 CONFIG_FIT=y
-CONFIG_BOOTSTAGE=y
-CONFIG_BOOTSTAGE_REPORT=y
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_CPU=y
 # CONFIG_CMD_IMLS is not set
@@ -24,7 +22,6 @@ CONFIG_CMD_DHCP=y
 # CONFIG_CMD_NFS is not set
 CONFIG_CMD_PING=y
 CONFIG_CMD_TIME=y
-CONFIG_CMD_BOOTSTAGE=y
 CONFIG_CMD_EXT2=y
 CONFIG_CMD_EXT4=y
 CONFIG_CMD_EXT4_WRITE=y
-- 
1.8.2.1