[U-Boot] [PATCH V2 06/15] imx: mx6: ddr: support i.MX6D/QPlus

[Peng Fan]

Support i.MX6D/QPlus.

Signed-off-by: Peng Fan <van.freenix at gmail.com>
Cc: Stefano Babic <sbabic at denx.de>
---
 arch/arm/cpu/armv7/mx6/ddr.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/cpu/armv7/mx6/ddr.c b/arch/arm/cpu/armv7/mx6/ddr.c
index 3cc8666..f151eec 100644
--- a/arch/arm/cpu/armv7/mx6/ddr.c
+++ b/arch/arm/cpu/armv7/mx6/ddr.c
@@ -1200,7 +1200,7 @@ void mx6_ddr3_cfg(const struct mx6_ddr_sysinfo *sysinfo,
 		mmdc1 = (struct mmdc_p_regs *)MMDC_P1_BASE_ADDR;
 
 	/* Limit mem_speed for MX6D/MX6Q */
-	if (is_mx6dq()) {
+	if (is_mx6dq() || is_mx6dqp()) {
 		if (mem_speed > 1066)
 			mem_speed = 1066; /* 1066 MT/s */
 
@@ -1219,7 +1219,7 @@ void mx6_ddr3_cfg(const struct mx6_ddr_sysinfo *sysinfo,
 	 * Data rate of 1066 MT/s requires 533 MHz DDR3 clock, but MX6D/Q supports
 	 * up to 528 MHz, so reduce the clock to fit chip specs
 	 */
-	if (is_mx6dq()) {
+	if (is_mx6dq() || is_mx6dqp()) {
 		if (clock > 528)
 			clock = 528; /* 528 MHz */
 	}
-- 
2.6.2