[U-Boot] [PATCH] driver/ddr/fsl: Force enabling parity for A-009803

[York Sun]

On 05/23/2016 02:18 AM, Shengzhou Liu wrote:
>> -----Original Message-----
>> From: York Sun [mailto:york.sun at nxp.com]
>> Sent: Friday, May 20, 2016 11:29 PM
>> To: Shengzhou Liu <shengzhou.liu at nxp.com>; u-boot at lists.denx.de
>> Subject: Re: [PATCH] driver/ddr/fsl: Force enabling parity for A-009803
>>>
>>
>> Shengzhou,
>>
>> It looks backward. You should detect if the condition is right before
>> applying the workaround, not by forcing the condition.
>>
>> York
> 
> If ERRATUM_A009803 is defined, ap_en should always be enabled whatever user configures parity=on in hwconfig.
> As ERRATUM_A009803 is enabled only in arch-fsl-layerscape/config.h for LS2 SoC, I don't think we need to check anything other.
> What condition do you mean? 
> 

Shengzhou,

My point is you should force ap=1. Do you mean if ERRATUM_A009803 is enabled,
users are forced to use address parity? That doesn't sound right. We have been
running UDIMM without address parity for a long time.

York