[U-Boot] [PATCH 1/8] board: ge: bx50v3: move detect_baseboard() out of CONFIG_VIDEO_IPUV3

[Andrew Shadura]

detect_baseboard() function doesn't depend on CONFIG_VIDEO_IPUV3.
Make sure it's available when CONFIG_VIDEO_IPUV3 is off.

Signed-off-by: Andrew Shadura <andrew.shadura at collabora.co.uk>
---
 board/ge/bx50v3/bx50v3.c | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

diff --git a/board/ge/bx50v3/bx50v3.c b/board/ge/bx50v3/bx50v3.c
index ff8f4d7..e167cd5 100644
--- a/board/ge/bx50v3/bx50v3.c
+++ b/board/ge/bx50v3/bx50v3.c
@@ -321,6 +321,15 @@ int board_phy_config(struct phy_device *phydev)
 	return 0;
 }
 
+static int detect_baseboard(struct display_info_t const *dev)
+{
+	if (IS_ENABLED(CONFIG_TARGET_GE_B450V3) ||
+	    IS_ENABLED(CONFIG_TARGET_GE_B650V3))
+		return 1;
+
+	return 0;
+}
+
 #if defined(CONFIG_VIDEO_IPUV3)
 static iomux_v3_cfg_t const backlight_pads[] = {
 	/* Power for LVDS Display */
@@ -345,15 +354,6 @@ int board_cfb_skip(void)
 	return 0;
 }
 
-static int detect_baseboard(struct display_info_t const *dev)
-{
-	if (IS_ENABLED(CONFIG_TARGET_GE_B450V3) ||
-	    IS_ENABLED(CONFIG_TARGET_GE_B650V3))
-		return 1;
-
-	return 0;
-}
-
 struct display_info_t const displays[] = {{
 	.bus	= -1,
 	.addr	= -1,
-- 
2.7.4